119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Servo NARO Max Std
1 x	SE Ring 300 mm (2 pcs)
1 x
1 x	SE Ring 350 mm (2 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Ring 320 mm length (5 pcs)
2 x	ABS I Strip 20x10x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	SE Ring 250 mm (2 pcs)
2 x	Foil for sticking flaps and ailerons
1 x	Round Rod 1,25x1000 mm
1 x	SE Ring 200 mm (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
2 x	ABS Strip 1.5x3.0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Round Rod 4,0x1000 mm
1 x	SE Ring 450 mm (2 pcs)
1 x	SE Ring 360 mm (2 pcs)
1 x	Round Rod 6,0x1000 mm
2 x	Round Rod 2,0x1000 mm
2 x	ABS Strip 1.0x2.0x1000 mm
2 x	Strip ABS 2.0x5.0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	Marker ties (20 pcs)
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Parachute PV6 for F3J
1 x	Connectors banna oro 3 mm (M/F)
2 x	Parachute P4
1 x	XH male balance (3S) connector (2 pcs)
1 x	Connectors banna oro 4 mm (M/F)
1 x	XH female balance (5S) connector (2 pcs)
1 x	XH male balance (5S) connector (2 pcs)
2 x	Connectors banna oro 8,0 mm 5 pcs(Female)
2 x	2 mm female connector (2 pcs) with safety connector
2 x	Para-RC "RC-Evo-Cross" Rescue
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
2 x	Para-RC Trike "RC-Bullix"
1 x	Set cintas unión paracaídas 145 cm
2 x	Connectors banna oro 3,5 mm (M/F)
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
2 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Oracover Verde 2 m
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
2 x	ABS Strip 1.5x8.0x1000 mm
2 x	Strip ABS 2.0x10.0x1000 mm
1 x	Tube support Ø 6mm (10 pcs)
1 x	Tape GFK 50 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Conector MT-60 (pair)
1 x	Contacto macho pin conector (10 pcs)
1 x	Gold antispark 4 mm plug
1 x	Protector Connector Dean-T (1 pair)
1 x	Paramotor BackPack XXS (without accessories)
2 x	Windsock Ozone L - 700 mm
1 x	Connectors MPX black female
1 x	Conector JR Servo female (10 pcs)
1 x	Connectors DEANS (T) micro
1 x	Propeller APC 10x7 SF
1 x	Propeller APC 11x5.5 Electric
1 x	Propeller APC 12x6 SF
1 x	Propeller APC 12x6 Electric
1 x	Propeller APC 11x3.8 SF
1 x	Propeller APC 10x3,8 SF Electric Pusher
1 x	Propeller APC 10x4.7 SF
1 x	Propeller APC 10x5.5 MR Electric multirrotor
1 x	Propeller APC 11x4.7 SF Pusher
1 x	Slave-cable USB Easy Sim
1 x	Cable control set
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Telemetry interface ALTIS 12 cm
1 x	Wing OXY 0,5 pulgadas2
1 x	MPX PCB "4 Pins", 5 pieces
1 x	MPX housing with flange (4 pcs)
1 x	Keypad ALTIS V4
1 x	30 cm MULTIPLEX female connector
1 x	Opale Rucksack
1 x	Trike XL motor set (motor+esc+prop)
1 x	LUCAS pilot ARTF
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	Windsock Ozone L -1200 mm
1 x	Conector XT-30 (macho)
1 x	Propeller APC 10x3,8 SF
1 x	Strip 1,5x1,5x330 mm
1 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	EWC3 100 cm wing connector
1 x	DPSI RV Mini 6 Magic
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)

3,013.29EUR