119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

2 x	Landing gear strap large (4 uds)
4 x	Quick hose connector 4-4 mm
1 x	Angle of incidence meter
2 x	Check valve quick hose connector 4-4 mm
3 x	Wheel cover holder Ø 4 mm (2 uds)
1 x	Tap FESTO 6-6 mm
2 x	T-Hose connector 6-6-6 mm
2 x	Servo arm with 6 mm hole to FEMA 9800A
1 x	Medidor ángulos y/o incidencias
2 x	Y-Hose connector 4mm
2 x	Tap FESTO 4-4 mm
1 x	Angle measurer
2 x	Air pressure gauge
2 x	Y-Hose connector 4-4-4mm
2 x	Field folding model stand
2 x	40 mm air cylinder
1 x	Truck-trailer for gliders 720 x 239 mm
2 x	Body for landing gear Ø 3 mm
2 x	Quick hose connector 3-3 mm
2 x	Y-Hose connector 3-3-3 mm
2 x	Wheel cover holder Ø 6 mm (2 uds)
2 x	T-Hose connector 2-2-2 mm
2 x	Wheel cover holder Ø 5 mm (2 uds)
2 x	Landing gear strap medium (4 uds)
1 x	Angled clevis with threaded rod M3
1 x	Quick hose connector 4-4 mm
2 x	Servo arm with 5 mm hole to FEMA 9810A
3 x	Quick hose connector 6-6 mm
2 x	Faucet FESTO
1 x	Surface Indicator Gauge Small
3 x	Fail Safe air retract
1 x	Extension 90 cm (Futaba)
1 x	Parachute BACKUP X100
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Spray Graphit 33
3 x	Aluminun wheel collar 2 mm Ø (4 uds)
2 x	Wheel collar 2 mm Ø (4 uds)
2 x	Landing gear clamp for Ø 3 mm (4 uds)
2 x	Propeller balancer
2 x	WingFix ULTRA Black Edition
3 x	Landing gear axle Ø 4 mm (2 uds)
1 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x	Recessed MPX connector support (6 pcs)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Combo 4 pcs AXI 2204 Multicopter
2 x	Wheel collar 3 mm Ø (4 uds)
2 x	Blade Holder (3 blades)
1 x	Raer wall
1 x	Tail support (2 pcs)
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	Balls 4 mm
1 x	Steering lever
1 x	Head lower part New
1 x	Rotorhead pushrod
1 x	Head spacer
1 x	Head core
1 x	Propeller balancer
1 x	Wheel keeper washer
1 x	Blade holder center GFK 0,5 mm
1 x	Head lower part
1 x	Blade holder lower
1 x	Rotor Mast
1 x	Head upper part
1 x	Y-Hose connector 6-6-6 mm
1 x	OLED-Display for PowerBox Mercury SRS
1 x	USB Adaptor OPTronics
1 x	PowerBox OLED display
1 x	PowerBox Cockpit SRS (incl. SensorSwitch)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Gear set HITEC HS-125MG/5125MG
1 x	HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program
2 x	Servo HITEC D85 MG
1 x	Servo HITEC D941 TW
1 x	Servo Digital HITEC HS-5065 MG
1 x	PowerBox MAG Sensor
1 x	PowerBox iGyro SRS + GPS Modul
1 x	PowerBox iGyro 1e
1 x	Charging Extension 50cm for 2 Battery
1 x	Power Box GPS Sensor III
1 x	Extension for SensorSwitch 60cm
1 x	PowerBox 12
1 x	GPS Logger Dymond
1 x	T-Hose connector 3-3-3 mm
1 x	FESTO connector M7 barb fitting 4mm
2 x	Racor "Y" 3 mm
2 x	Racor 3/3 mm
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Festo Adaptor Tygon Large/4mm
2 x	Quick hose connector 3-3 mm
1 x	Landing gear clamp for Ø 2 mm (4 uds)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Body for landing gear Ø 4 mm
1 x	Compact on-board starting system (9525)
1 x	Wheel FEMA 90 mm / 6 mm
3 x	Servo arm with 4 mm hole to FEMA 9810A
1 x	Wheel FEMA 178 mm / 8 mm
1 x	Racor 4/4 mm
2 x	Polyurethan FESTO hose 3x0,5 mm, transparent
1 x	Z-shaped servo mount
1 x	T-Hose connector 4-4-4mm
2 x	Nylon threaded block M4 (2 uds)
1 x	T-Hose connector 3-3-3 mm
2 x	Nylon gear block Ø 6 mm (2 uds)
1 x	Racor 2/3 mm
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Y-Hose connector 2-2-2 mm
2 x	Festo 6mm Tubing Holder (10 uds)
1 x	Landing gear clamp for Ø 4 mm (4 uds)
1 x	Aero shocks
1 x	Nylon gear block Ø 5 mm (2 uds)
2 x	Landing gear axle Ø 5 mm (2 uds)
2 x	Festo 4mm Tubing Holder (10 uds)
1 x	Nylon threaded block M6 (2 uds)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
2 x	Nylon gear block Ø 3 mm (2 uds)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Nylon threaded block M5 (2 uds)
2 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Dual Sequencer Gear and Canopy
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Nylon gear block Ø 4 mm (2 uds)
1 x	Support conector MPX (6 pcs)
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x	1804 2400KV Brushless Motor Qav 250 mini
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	Soporte filtro FESTO (4 pcs)
1 x	ESC ALPHA 60A HV
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	12x6 tree blades propeller
1 x	Propeller POWER-PROP 15x8
1 x	Propeller POWER-PROP 12x8
1 x	Vess propeller 11x7 S
1 x	PowerBUS to PWM
1 x	Servo HITEC D625 MW
1 x	Servo HITEC HS-311
1 x	Gear set HITEC HS-7950TH
1 x	EWC3 40 cm wing connector
1 x	DPSI Micro MPS
1 x	AXI 2204 Multicopter
1 x	Spare Part Frame Set for EACHINE RACER 250
1 x	Motor Mega AC 22/30/02
1 x	Motor Mega AC 16/07/04
1 x	Motor Mega AC 16/15/04 COMBAT
1 x	Motor Mega AC 16/07/12
1 x	Motor Mega AC 16/07/03
1 x	2 mm Prop Adapter M6
1 x	PowerBox Competition SR2
1 x	Gyro 3-Ejes REFLEX V2 FMS
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Servo HITEC HS-225 MG
1 x	Gear set HITEC HS-311/322/325BB
1 x	Servo HITEC D-955 TW Titanium
1 x	Gear set HITEC HS-225
1 x	Gear set HITEC HS-65 HB
1 x	Servo HITEC D145 SW
1 x	Servo HITEC HS-5585MH
1 x	HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos
1 x	Brazo servo aluminio HITEC HS-125MG/5125MG
1 x	Gear set HITEC HS-645MG/5645MG/5685MH
1 x	Servo case HS-225MG/225BB/5245MG
1 x	Servo HITEC D954 TW
1 x	Servo HITEC D645 MW
1 x	Servo HITEC D951 TW
1 x	Motor Mega AC 16/07/06
1 x	Cover cap drop-shaped paintable 43 mm
1 x	DPSI RV Mini 6 Magic
1 x	MPX housing with flange (4 pcs)
1 x	Fueling valve "Air"

7,815.46EUR