119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	SE Ring HACKER 300 mm (2 pcs)
2 x	SE Ring 400 mm (2 pcs)
1 x	Spikes Band (5 m)
1 x	Tape GFK 25 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 450 mm (2 pcs)
1 x
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	SE Ring 360 mm (2 pcs)
1 x	Foil for sticking flaps and ailerons
2 x	Cinta Goldfix 1m
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	SE Ring 350 mm (2 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
2 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
2 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Piloto jet 130 mm
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Para-RC Mix
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Recessed MPX connector support (6 pcs)
1 x	Support conector MPX (6 pcs)
2 x	Bateria DJI Mini 2 2250 mAh
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Glass fabric 49 g/m² (1,27 x 20 m)
1 x	Fibra de vidrio 80 g/m² (10 m x 100 cm)
1 x	Three-function control switch by FUTABA
2 x	Fournier RF-4D
1 x	Tape GFK 38 mm
2 x	20x200 mm battery rings
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x	Foam plastic plates (310x210x5 mm)
1 x	Carbon plate 550x350x3.0 mm ECOTECH
1 x	Carbon plate 550x350x4.0 mm ECOTECH
1 x	Fiberglass plate 350x150x3.0 mm
1 x	Foam plastic plates (310x210x2 mm)
1 x	Carbon plate 350x150x2.0 mm
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 20 m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m
1 x	Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x	Glow starter with charger 230v
1 x	Ball Bearing Oil 25 ml
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	BETA 1400 RTF Red
1 x	Combustible Glow "KAVAN" air/heli 5% nitro
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Charger SKY RC e680
1 x	Kavan Car 25% nitro 1l
1 x	BETA 1400 ARF Red
1 x	Ciano KAVAN Medium 20g
1 x	Electric Fuel Pump 12v
1 x	Conector MT-60 (pair)
1 x	Battery LiPo GRE18 600 mAh 7.4v
1 x	Spinner 40 mm Black (Kavan)
1 x	Fuel bottle 500 ccm
1 x	Glow Plug Clip 1.3 Ah
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible
1 x	P 17×5.8 Prop-2PCS/PAIR
1 x	DJI Mavic Air Fly More Combo
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x	DJI FPV Combo
1 x	1804 2400KV Brushless Motor Qav 250 mini
1 x	Combo 4 pcs AXI 2204 Multicopter
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	Transmitter Balancer Futaba T-10CG
1 x	Adapter 3,2 mm M8
1 x	Allen wheel collar M3x5
1 x	Adapter 3,0 mm M8
1 x	3 mm Long Prop Adapter M5
1 x	4 mm Prop Adapter M6
1 x	Adapter 3,0 mm M6
1 x	Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x	DPSI Ampere & Voltage bundle
1 x	DPSI Micro - RCS RV
1 x	120 mm leg for retract undercarriage with rotation sistem (1 pcs
1 x	160 mm carbon undercarriage (2pcs)
1 x	Crystal Universal RX 35.040 Ch 64
1 x	Set Altimeter SHRead
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Allen wheel collar M3x3
1 x	Adapter 4,0 mm M6
1 x	Adapter 3,2 mm M6
1 x
1 x	12 mm dogdrive props
1 x	Allen wheel collar M4x4
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	3 mm Short Prop Adapter M5
1 x	6 mm Prop Adapter M8
1 x	Allen wheel collar M4x6
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	3,2 mm Prop Adapter M5
1 x	2,3 mm Prop Drive Günther M4
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	DPSI Micro MPS
1 x	DPSI Ampere battery backer

8,925.49EUR