119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	ABS I Strip 10x5x1000 mm
1 x	Round Rod 1,0x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
2 x	ABS Strip 1.5x8.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	Glases Nimbus "Black"
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
3 x	Motor DLE 170 M- Paramotors
2 x	Big Crow DLE-170M
2 x	Small Crow DLE-170M
1 x	Glases Stratus
1 x	Glases Innovation Plus
1 x	Glases Ace
2 x	Motor DLE 200cc Std
2 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Glases Moritz
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Straightened threaded rod M3 - 1m
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Micro flex hinge (12 uds)
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	15 mm reinforced hinge
1 x	Straightened threaded rod M2-1m
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Brass rod Ø 0.8 mm x 1000 mm
2 x	Small pinned hinge (12 uds)
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Flap hinge (6 pcs)
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x	Miniature brass strap hinge, 1 m
2 x	Gates hinge 30x16 mm (2 pcs)
2 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	18 mm reinforced hinge
1 x	Long pinned hinge (12 uds)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Long pinned hinge (6 uds)
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Large flex hinge (12 uds)
1 x	25 mm reinforced hinge
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Support conector MPX (6 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Support FUEL DOT V3
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	Strip 3,5x1,75x330 mm
2 x	Round Rod 6,0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	Motor OS 3820-1200 electric
1 x	Motor DLE 200cc Premium Muffler
1 x	Round flex hinge (12 uds)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Gates hinge
1 x	F3A carbon 85 mm spinner for AXI
1 x	Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x	51 mm INO spinner (carbon imitation)
1 x	Falcon Carbon Spinner 82mm for electric motor
1 x	F3A carbon 80 mm spinner for Spark EVO
1 x	Nut for 515/518/519 spinner special for Hacker
1 x	POWER PEAK D7 EQ-BID 12V/230V-Duo Charger
1 x	PROFI TX fastening rings
1 x	FUNRAY RR
1 x	Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m
1 x	70x23 Ø3.5 mm aluminium core wheel
1 x	57 mm INO spinner (carbon imitation)
1 x	PARKMASTER PRO Kit + (RR)
1 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	Alu servo arm double RHINO
1 x	EXTRA NG 85" 2159mm yellow/blue
1 x	Power MULTIlight
1 x	Spinner 42 mm EXTRA 330SC
1 x	EXTRA 330SC-E 95" Orange/Blue/White
1 x	MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER
1 x	LENTUS Multiplex Propeller 8x6
1 x	FunCub NG azul RR
1 x	Adaptador equilibrador HITEC (XH)
1 x	GPS V2 Sensor for M-LINK receivers
1 x	ABS I Strip 20x10x1000 mm
1 x	Propeller POWER-PROP 7x7

20,120.43EUR