18.00EUR

EWC3 100 cm wing connector
[EMCA85082]

EWC3 100 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
2 x	ABS angle 10,0x10,0x1000 mm
2 x	Profile ABS Square 2 x 1000 mm
2 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
3 x	Profile ABS Square 4 x 1000 mm
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
3 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	5 line servos wire black (1 m)
1 x	1/6 Pilot "John"
1 x	Support Filtro FESTO
1 x	Soporte filtro FESTO (4 pcs)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
2 x	ABS "T" angle 6.0x6.0x1000 mm
2 x	Profile ABS half cane 2.5x1000 mm
1 x	SERVO HOLDER
2 x	Flat Connector 4.0 mm x 1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 8.0x1000 mm
2 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	Optical RPM Sensor
1 x	U Profile ABS 3,0x6,0x1000 mm
2 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Profile ABS half cane 4x1000 mm
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Long pinned hinge (6 uds)
2 x	Miniature brass strap hinge, 1 m
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Cargador para AA/AAA Ni-MH & Ni-Cd
1 x	Jeti Black cap
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 90º
1 x	Rubber profile 8-2 mm 2M
1 x	Hardener Aero EPH 161 (500 g)
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Gates hinge
1 x	Flap hinge (6 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Wing Joiner ULTIMATUM 2.0 m
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts)
1 x	Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO
1 x	Carbon plate 350x150x1.0 mm
2 x	Set stickers JEEMO "Andy"
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Fuselage Bags JEEMO
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	DPSI Ampere & Voltage bundle
1 x	DPSI Micro - RCS RV
1 x	EWC6 40 cm wing connector
1 x	KIRA 480-43
1 x	Motor rotor LA-500
1 x	Blades 330mm
1 x	Adjustable launching hook
1 x	Tow hook for tug
1 x	9x4.7 * 22x12 carbon propeller
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Jeemo Dolly
1 x	Small flex hinge (12 uds)
1 x	Indoor hinge with servo arm integraded
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Round flex hinge (12 uds)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x	OPTOTRONIX Aurora LCU
1 x	Cover cap drop-shaped paintable 43 mm
1 x	DPSI 2001 RV
1 x	Optotronix Aurora Plug
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	EWC3 100 cm wing connector
1 x	DPSI OCP Overload protection
1 x	Magnetic Connect locking system
1 x	MPX Sub-D Adaptor
1 x	Heat sink for Optotronix LEDs

3,925.24EUR