Top » Catalog » Emcotec » EMCA15055

149.95EUR

DPSI Ampere & Voltage bundle
[EMCA15055]

DPSI Ampere & Voltage bundle

Product description
DPSI Ampere - Produktbeschreibung
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere & Voltage bundle can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models.
System stability of the DPSI Ampere & Voltage bundle is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery.
The DPSI Ampere & Voltage bundle is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.
The DPSI Ampere & Voltage bundle can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.
The DPSI Ampere & Voltage bundle is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere & Voltage bundle.
Function overview
Loss-free switching function without diodes.
Integrated electronically fail-proof switches separately for each battery without using the micro controller (CSHC).
Dual safeguarded power off logic. Even a failing part does not lead to a power out.
IVM (Intelligent Voltage Monitoring). Battery voltage monitoring with acoustic warning signals for all supported battery types (NiMH, LiIon, LiPo, LiFePO4).
Booster for safe control of the power switches even at extremely low voltages or short power interruptions (MBOOST).
DPSI Voltage - Product description
Voltage regulator module for battery backer DPSI Ampere.
The module must be plugged to the output side of the DPSI Ampere. With a jumper regulated output voltages of 6 volts, 6.6 volts or 7.2 volts can be selected. Furthermore the unregulated battery voltage can be used additionally on a secound output.
Delivery includes dual power supply DPSI Ampere, voltage regulator DPSI Voltage, programming jumper, switching magnet with EMCOTEC patch as well as German and English operating instructions.

under request

Reviews

Quick Find

Shopping Cart

2 x	Round Rod 1,25x1000 mm
2 x	Strip ABS 2.0x10.0x1000 mm
2 x	Round Rod 2,0x1000 mm
2 x	ABS Strip 1.5x3.0x1000 mm
1 x	Strip 3,5x1,75x330 mm
2 x	ABS Strip 1.5x2.0x1000 mm
2 x	Strip ABS 2.0x3.0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
2 x	ABS Strip 1.5x6.0x1000 mm
3 x	Strip ABS 2.0x8.0x1000 mm
3 x	Round Rod 6,0x1000 mm
3 x	Round Rod 1,5x1000 mm
1 x	Strip 2,5x1,25x330 mm
3 x	Strip 1,5x1,5x330 mm
2 x	Round Rod 2,5x1000 mm
2 x	ABS Strip 1.0x3.0x1000 mm
1 x	Round Rod 4,0x1000 mm
2 x	ABS Strip 1.5x4.0x1000 mm
2 x	ABS I Strip 20x10x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
2 x	Strip 2,0x2,0x330 mm
2 x	Round Rod 3,0x1000 mm
2 x	ABS Strip 1.0x4.0x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
4 x	ABS Strip 1.5x8.0x1000 mm
1 x	Round Rod 1,0x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
2 x	SE Ring 330 mm (4 pcs)
2 x	Ring 320 mm length (5 pcs)
2 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	20x1000 mm Ring Strap Back To Back
1 x	SE Ring 350 mm (2 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Pilot "Anthony" (Slimline)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	1/6 Pilot "Garry"
2 x	Pilot "Duke" Legends Series (Slimline)
1 x	Servo NARO Max Std
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
2 x	Civilian pilot "Gramps" size 9cm (Slimline)
2 x	1/12 Pilot "Tom"
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Hovercraft sailcloth
1 x	Pilot "Goose" (Slimline)
2 x	1/6 Pilot "Buddy"
3 x	1/10 Pilot "Jimmy"
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
3 x	1/4 Pilot "Heidi"
1 x	1/6 Pilot "Tony"
1 x	Piloto Jet "Red" 1/6 Scale
2 x	1/12 Pilot "Fighter"
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	1/10 Pilot "Jack"
1 x	1/4 Pilot "Mike"
1 x	Pilot "Dick" Legends Series (Slimline)
2 x
1 x	Pilot JAN 1/4 Saiplanes
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Smoke set "S"
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Parachute BACKUP X100
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Angled clevis with threaded rod M3
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Balls 4 mm
1 x	Complete kit CAT 966G II WEDICO-construction-models
2 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	SE Ring 250 mm (2 pcs)
1 x	Tape GFK 50 mm
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Marker ties (20 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Tube Pitot to PIXHAWK
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Field folding model stand SebArt
2 x	Cinta Goldfix 1m
1 x	Spikes Band (5 m)
1 x	SE Ring 400 mm (2 pcs)
1 x	3,2 mm Prop Adapter M8
1 x	6 mm Prop Adapter M8
1 x	3.2 mm Prop Adapter M8
2 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	3,2 mm Prop Adapter M6
1 x	Prop Shaft Adapter 5 mm "long"
1 x	PT 21x13 EL Propeller
1 x	PT 20x13 EL Propeller
1 x	PT 16x10 E Propeller
1 x	PT 21x13 EL Propeller 3 Blade
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	DPSI Ampere & Voltage bundle
1 x	Propeller POWER-PROP 14x9 Izda
1 x	CA Glue (medium) 20g
1 x	SE Ring 200 mm (2 pcs)
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	20x200 mm battery rings
1 x	Foil for sticking flaps and ailerons
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	DPSI Ampere battery backer

8,904.83EUR