Top » Catalog » Emcotec » EMCA15055

149.95EUR

DPSI Ampere & Voltage bundle
[EMCA15055]

DPSI Ampere & Voltage bundle

Product description
DPSI Ampere - Produktbeschreibung
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere & Voltage bundle can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models.
System stability of the DPSI Ampere & Voltage bundle is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery.
The DPSI Ampere & Voltage bundle is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.
The DPSI Ampere & Voltage bundle can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.
The DPSI Ampere & Voltage bundle is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere & Voltage bundle.
Function overview
Loss-free switching function without diodes.
Integrated electronically fail-proof switches separately for each battery without using the micro controller (CSHC).
Dual safeguarded power off logic. Even a failing part does not lead to a power out.
IVM (Intelligent Voltage Monitoring). Battery voltage monitoring with acoustic warning signals for all supported battery types (NiMH, LiIon, LiPo, LiFePO4).
Booster for safe control of the power switches even at extremely low voltages or short power interruptions (MBOOST).
DPSI Voltage - Product description
Voltage regulator module for battery backer DPSI Ampere.
The module must be plugged to the output side of the DPSI Ampere. With a jumper regulated output voltages of 6 volts, 6.6 volts or 7.2 volts can be selected. Furthermore the unregulated battery voltage can be used additionally on a secound output.
Delivery includes dual power supply DPSI Ampere, voltage regulator DPSI Voltage, programming jumper, switching magnet with EMCOTEC patch as well as German and English operating instructions.

under request

Reviews

Quick Find

Shopping Cart

1 x	Stickers-digit for marking
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Gates hinge
1 x	Flap hinge (6 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
2 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
2 x	Pin type hinge Al 4,5x70 mm (2 pcs)
3 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Micro flex hinge (12 uds)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	20x1000 mm Ring Strap Back To Back
2 x	SE Ring 350 mm (2 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
3 x	SE Ring 480 mm (2 pcs)
1 x	Tape GFK 25 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x
2 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
2 x	20x200 mm battery rings
3 x	Cinta Goldfix 1m
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
2 x	Carbon fiber rod 20 mmx1000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
2 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
2 x	Carbon fiber rod 0.5 mmx1000 mm
2 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Cable coupler M3 (10 uds)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Cable coupler M2x66 (2 uds)
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	4 mm M3 red control terminal (4 pcs)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	45 mm rods set for direction control
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	Profile ABS half cane 3x1000 mm
1 x	Interface Realflight Simulator
1 x	Oratex Natural White 2m
1 x	Robart Door Hinge (Pk2)
1 x	Crystal Universal RX 35.070 Ch 67
1 x	Crystal TX 35.150 Ch 75
1 x	Small pinned hinge (12 uds)
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Crystal Universal RX 35.140 Ch 74
1 x	Crystal Universal RX 35.030 Ch 63
1 x	Crystal RX 35.120 Ch 72
1 x	Crystal TX 35.100 Ch 70
1 x	Crystal Universal RX 35.170 Ch 77
3 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Tape GFK 38 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
2 x	Spikes Band (5 m)
2 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
2 x	SE Ring 360 mm (2 pcs)
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	Tape GFK 50 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Silent-blocks DLE 170M
1 x	Small Crow DLE-170M
1 x	6 mm Quick clamp_S (10 pcs)
1 x	Protective Cover for wires Ø 15 mm 1000 mm
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x	Big Crow DLE-170M
1 x	Motor KAVAN PRO 2225-1600
1 x	Support FUEL DOT V3
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Micro Crystal RX 35.070 Ch 67
1 x	Dummy motor GPW Wasp Scale 1/4
1 x	Small pinned hinge (6 uds)
1 x	Crystal RX 35.020 Ch 62
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x	Program card KAVAN PRO
1 x	Actuator Electric 25 mm
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Support XT60 conector (2 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Support ECU Xicoy X-45
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	Support Flush MPX Conector (6 pcs)
1 x	Support Pitot JETI
1 x	Support pump Xicoy X45
1 x	Angle support XT60 conector
1 x	Soporte grifo FESTO (2 pcs)
1 x	Bidule 111 3000 mm
1 x	Bidule 55 2460 mm Cabina
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Crystal RX 35.250 Ch 285
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x	USB Charger 120-240V AC
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Adaptadores carga 6s JST-XH
1 x	2,3 mm Prop Drive Günther M4
1 x	250 mm / 16 mm Airbrakes
1 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x	Crystal RX 35.050 Ch 65
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x
1 x	Long pinned hinge (12 uds)
1 x	Charger SKY RC D200 neo
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	SKY RC T400Q Charger 4x100w
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	USB Charger 12V DC for car
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	18 mm reinforced hinge
1 x	Adapter 3,0 mm M6
1 x	3 mm Long Prop Adapter M5
1 x	10 mm dogdrive props
1 x	12 mm portholes (10 pcs)
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	3 mm Leader (L 100 mm)
1 x	3.2 mm Prop Adapter M6
1 x	12 mm mast holder
1 x	10 mm Prop Adapter M12
1 x	3,2 mm Prop Adapter M8
1 x	16x10 tree blades propeller Master Airscrew
1 x	3.2 mm Prop Adapter M8
1 x	29,0 mm propeller (left propeller)
1 x	14 mm portholes (10 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	63 mm INO spinner (carbon imitation)
1 x	Motor DLE 170 M- Paramotors
1 x	Motor DLE 200cc Std
1 x	Motor DLE 200cc Premium Muffler
1 x	E_brakes electronics
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell

11,815.06EUR