119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	XH male balance (5S) connector (2 pcs)
1 x	MPX Sub-D Adaptor
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Connectors banna oro 0,8 mm (M/F)
2 x	Connectors banna oro 6,0 mm (M/F)
2 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Connectors DEANS 4 pins (1 pair)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
2 x	Flap hinge 33x9 mm (6 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
2 x	Gates hinge 30x16 mm (2 pcs)
2 x	Long pinned hinge (12 uds)
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
3 x	Micro flex hinge (12 uds)
1 x	Connectors banna oro 2 mm (M/F)
1 x	Optotronix Aurora Plug
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
3 x	XH male balance (2S) connector (2 pcs)
2 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	XH female balance (3S) connector (2 pcs)
1 x	Gold antispark 4 mm plug
1 x	Flap hinge (6 pcs)
2 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	XH male balance (3S) connector (2 pcs)
1 x	Small pinned hinge (12 uds)
2 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
2 x	Connectors banna oro 4 mm (M/F)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
3 x	Gates hinge black 30x16 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
2 x	Large flex hinge (12 uds)
1 x	30 cm DEANS female connector
1 x	XH female balance (2S) connector (2 pcs)
2 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x	Miniature brass strap hinge, 1 m
2 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
3 x	Connectors banna oro 3 mm (M/F)
1 x	Gates hinge
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
2 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Conector BEC female (10 pcs)
1 x	Banna gold connector 2,5 mm (M/F)
2 x	18 mm reinforced hinge
2 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Paramotor Trike XL
1 x	Parachute BACKUP X100
1 x	Windsock Ozone L -1200 mm
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Windsock Ozone L - 700 mm
1 x	Parachute PV6 for F3J
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	ABS tube 9.0x8.0x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
2 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Ferrita 17x10x6.5 mm
2 x	Straightened rod Ø 1.2 mm x 1500 mm
2 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Ferrita con funda
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
2 x	Ferrita 14x8x5.5 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
2 x	Ferrita 27x14x7 mm
2 x	Brass hexagonal rod Ø 5 mm x 1000 mm
2 x	Brass hexagonal rod Ø 4 mm x 1000 mm
2 x	Regulador Jeti Jes 045
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Long ball link M1.6 (6 uds)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Jeti Box mini
1 x	Socket head ball link M3 (2 uds)
1 x	Ball link M2,5 (10 pcs)
2 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	MPX Support
1 x	Connector CAN 15
2 x	Indoor hinge with servo arm integraded
1 x	15 mm reinforced hinge
2 x	Conector JR Servo female (10 pcs)
2 x	Conector XT-30 (macho)
1 x	Conector JR Servo male (10 pcs)
1 x	XH female balance (9S) connector (2 pcs)
1 x	Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x	XH male balance (7S) connector (2 pcs)
1 x	Connectors MPX black female
1 x	Conector JR Servo female (50 pcs)
1 x	XH male balance (9S) connector (2 pcs)
1 x	45x9 mm foam special light KOVO wheel with radius (2 pcs)
1 x	64x20 mm (2.5") Type jets aluminium core wheel
1 x	100x50 mm SLH KOVO wheel
1 x	DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS
1 x	32x9 mm foam standar KOVO wheel (2 pcs)
1 x	120x60 mm SLH KOVO wheel
1 x	DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC)
1 x	35x14 mm hard foam KOVO wheel (2 pcs)
1 x	89x25 mm (3.50") Type jets aluminium core wheel
1 x	89x32 mm (3.5") axle Ø5 mm aluminium core wheel
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Straightened threaded rod M2-1m
3 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Ballast 700gr OPALE
1 x	LUCAS pilot ARTF
2 x	Long pinned hinge (6 uds)
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Para-RC Mix
1 x	Conector Servo female 4 pines
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Wing OXY 5,0 m2
2 x	SERVO HOLDER
2 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	Adaptadores carga 6s JST-XH
1 x	Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x	Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	LOWER TOW HOOK
1 x	Turbina KINGTECH K320 G5
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Glow starter with charger 230v
1 x	Oracover Orange 2 m
1 x	M3 Maxi ball link (2 uds)
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	Towing hook
1 x	Fixed launching hook
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Landing gear axle Ø 8 mm (2 uds)
1 x	Xplorer3 anemometro
1 x	Brake for 140 mm wheels
1 x	Absorver mount set for 5-10 Kg models
1 x	100 Newtons FEMA absorber
1 x	Compact on-board starting system (9724)
1 x	Lightweight aircraft wheel, 50x18.5x3
1 x	DPSI OCP Overload protection
1 x	DPSI V-Match
1 x	Motor Mega AC 16/07/06
1 x	Motor Mega AC 22/30/02
1 x	Motor Mega AC 16/07/04
1 x	Mega Motor RC 400 F5J 1950KV
1 x	Motor Mega AC 16/15/05 CE F5J
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	Motor Mega AC 22/30/03
1 x	Crawler GRE-24 RTR 1:24 Arena
1 x	Servo DITEX EL0510M
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Aceite DELUXE turbine Jet Oil 1 litro
1 x	Wheel FEMA 140 mm / 6 mm
1 x	Xplorer1 anemometro
1 x	Set freno para ruedas Dia. 127 mm
1 x	Wheel FEMA 152 mm / 8 mm
1 x	Compact on-board starting system (9512)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	Wheel FEMA 82 mm / 5 mm
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	25 mm reinforced hinge
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Round flex hinge (12 uds)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Small flex hinge (12 uds)
1 x	DPSI Ampere & Voltage bundle
1 x	Motor Mega AC 16/25/06
1 x	Hose clamps 0.16-0.20in, (4 pieces)
1 x	DPSI Micro - RCS
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	DPSI Micro - RCS RV
1 x	Motor Mega AC 16/25/02
1 x	Motor Mega AC 16/15/03

13,171.51EUR