119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	BEC 3A FOXY
1 x	Conector JR Servo female (10 pcs)
1 x	DPSI magnetic switch actuator (housing)
1 x	6 mm M3 variable horn
1 x	DPSI Ampere battery backer
1 x	Horn mando small (2 pcs)
1 x	Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	Tape GFK 50 mm
1 x	Extinguisher CO2 - 2 Kg
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Stickers-digit for marking
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Nitroverdu 500 ml
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Cable Cargador FUTABA
1 x	SE Ring 200 mm (2 pcs)
3 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Softshell Hispano Aviación
2 x	Tube support Ø 6mm (10 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	Fiberglass heat shield Ø 4 mm 1000 mm
1 x	20x200 mm battery rings
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	10 mm Quick clamp_L (6 pcs)
1 x	Vest clothes Hispano Aviación
1 x	Foil for sticking flaps and ailerons
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Optical RPM Sensor
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Extension lead 15 cm Multiplex
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Extension silicon 100 cm (Graupner)
2 x	Blind nut M6 (4 pcs)
2 x	Buy Perforated film 145 cm / 50 m
1 x	Field folding model stand
1 x	Aluminium M2x12 mm screw (4 pcs)
1 x	Extension silicon 75 cm (Graupner)
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Straightened threaded rod M2-1m
1 x	Angle measurer
2 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Extension silicon 30 cm female (Futaba)
1 x	Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Rubber profile 6-2 mm 2M
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Propeller balancer
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Blind nut M3 (4 pcs)
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	200 mm extensión servo HITEC/JR
1 x	Profile ABS Square 4 x 1000 mm
1 x	ABS tube 12.0x10.0x1000 mm
1 x	LA500 pre-rotation gear
1 x	Head spacer
1 x	Yellow smoke bombs AX-60 (5 pcs)
2 x	Black smoke bombs AX-60 (5 pcs)
1 x	Blade holder upper
1 x	"M" set
1 x	Nut M2
1 x	Green smoke canister 100 g
1 x	Head core
1 x	Smoke set "S"
1 x	LA500 pilot-seat set
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	Green smoke canister 65 g
1 x	Balls 4 mm
1 x	AX-60 starters (5 pcs)
1 x	AX-60 starters (5 pcs)
1 x	Screws M1,6x6 Allen
1 x	Baering 3x8x4
1 x	LA500 rotor head core
1 x	Red smoke canister 100 g
1 x	Head upper part
1 x	Cooler motor type 150
1 x	Brass control horn M2 short for wire (2 pcs)
2 x	XT60 Connector with Holder Male 2pcs
1 x	Horn 6/20 with M3 Bearing
1 x	Support Pitot JETI
1 x	PowerBox iGyro SRS
1 x	POWERBOX Magic Jeti Switch
1 x	Sanyo RX Battery Eneloop 6,0 V JR
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	PowerBox Competition SR2
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Support conector MPX (6 pcs)
1 x	DYNAMOMETER S-1580
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	RX Battery Eneloop 6,0 V JR 2500 mAh
1 x	PowerBox Battery 4000
1 x	PowerBox PROFESSIONAL
1 x	PowerBox OLED display
1 x	MicroMatch PowerBox
2 x	PowerBox DigiSwitch V2 JR/JR
1 x	Sanyo TX Battery Eneloop 9,6 V Hitec
1 x	Suncover 100cc Red
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	External LED's (2 pcs)
1 x	BlueCom™ Adapter (Android / WP)
1 x	PowerBox PIONEER incl. microSwitch
1 x	Sanyo RX Battery Eneloop RX 4,8 V Futaba
1 x	PowerBox PowerExpander SRS
1 x	PowerBox iGyro 1e
1 x	Safetyclip MPX (6 pcs)
2 x	PowerBox Champion SRS
1 x	Sanyo RX Battery Eneloop 6,0 V FUT
1 x	PowerBox iGyro SAT
1 x	Sanyo RX Battery Eneloop 4,0 V AAA JR
1 x	Extension for LC-Display 50cm
1 x	RX Battery Eneloop 4,8 V JR 2500 mAh
1 x	Power Box GPS Sensor III
1 x	PowerBox MERCURY SR2
1 x	Sanyo RX Battery Eneloop 6,0 V JR
1 x	Sanyo RX Battery Eneloop 4,8 V JR
1 x	Sanyo RX Battery Eneloop 4,8 V JR
2 x	PowerBox MagSensor black connector SRS/Champion
1 x	PowerBox Cockpit SRS (incl. SensorSwitch)
1 x	Bateria LRP 2200-7.2v 6 cell NiMH
1 x	SPARK Switch 5.9v
1 x	Mobile Terminal
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Battlife Guard 2s
1 x	BlueCom™ Adapter (iOS)
1 x	Sanyo TX Battery Eneloop 9,6 V Futaba
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Hexagonal Nut M2.5 (10 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Tapping Screw M2.2x9.5 (10 pcs)
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	M3 black washers (4 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	4 blades set
1 x	Motor Mega AC 16/20/02
1 x	Blind nut M5 (4 pcs)
1 x	Bearings for motor HACKER C50
1 x	Motor mount M
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Motor Mega AC CAR 10 PRO
1 x	Fuselage Autogyro RAINBOW
1 x	Blade Holder (3 blades)
1 x	Motor Mega AC 16/15/08
1 x	Motor Mega AC 16/10/03 RACE
1 x	Motor Mega AC 16/15/04
1 x	Smoke set "Glider"
1 x	White smoke canister 65 g
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	Micro Crystal RX 35.170 Ch 77
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Canopy Latch
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Mounting frame MPX male connector
1 x	MPX housing with flange (4 pcs)
1 x	XT-90 connector (pair)
1 x	XH male balance (8S) connector (2 pcs)
1 x	XH male balance (3S) connector (2 pcs)
1 x	10 mm gas motor standoff
1 x	AC-10 pre-rotacion with motor
1 x	Electric coversion set
1 x	BALSA trip 10x10x1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Crystal Universal RX 35.170 Ch 77
1 x	Soldering PCBs 8pin, 5 pieces
1 x	XH female balance (4S) connector (2 pcs)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	XH male balance (2S) connector (2 pcs)
1 x	XT-30 connector (pair)
1 x	XH male balance (7S) connector (2 pcs)
1 x	Wing conexion 2 servos Futaba 50 cm
1 x	XH male balance (4S) connector (2 pcs)
1 x	Wing conexion 2 servos JR/Graupner 50 cm
1 x	XH male balance (5S) connector (2 pcs)
1 x	XH female balance (9S) connector (2 pcs)
1 x	XT-60 connector (female)
1 x	XH male balance (6S) connector (2 pcs)
1 x	XH female balance (2S) connector (2 pcs)
1 x	Soporte carbono MR30 (2 pcs)
1 x	XH male balance (9S) connector (2 pcs)
1 x	XT-60 connector (male)
1 x	XH female balance (7S) connector (2 pcs)
1 x	LED wire (green - 2pcs)
1 x	Jet Afterburner Simulator NF-Jet3 YSW
2 x	PowerBox iGyro 3xtra
1 x	Charging Extension 50cm for 2 Battery
1 x	PowerBox Evo
1 x	2 piece mounting frame
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	50m servo "Premium" wire (white/red/blue)
2 x	Extension for SensorSwitch 30cm
1 x	2 piece mounting frame
1 x	DPS Switch JR/JR
1 x	NF-3X-80 liner Kit
1 x	Cover cap drop-shaped paintable 43 mm
1 x	DPSI Micro - RCS
1 x	Filter Capacitor JR
1 x	4Wx2 Power Navigation Light, 13mm, T-Fuse White
1 x	Nut for mounting M3 (4 pcs)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	HITEC DPC-11 programmer
1 x	Threaded insert M3 (4 pcs)
1 x	LED lighting system High Power
1 x	LED blink wire flashing (orange - 2pcs)
1 x	Spray Graphit 33
1 x	PowerBox DigiSwitch V2 MPX/JR
1 x	POWERBOX Magic Jeti Switch Royal SRS, Champion SRS
1 x	PowerBUS Lead 60 cm
1 x	Solvent Plasti Dip 1000 ml
1 x	Fuel Dot (Silver)
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch

13,685.99EUR