16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock	Quick hose connector 4-4 mm temporarily out of stock
Silicone 0,50 qmm servos wire Futaba (100 m) temporarily out of stock	JetiBOX temporarily out of stock	Cockpit aluminium closing temporarily out of stock

Quick Find

Shopping Cart

1 x	Double conector with JR adapter and 200 mm extension
1 x	Cabling for Fox MDM1 wings
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Dean "T" - Futaba Adapter
1 x	5 LiPo XH>EH adapter
1 x	CC 02
1 x	4 LiPo XH>EH adapter
1 x	30 cm BEC cable (male)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	CM-3
1 x	DPS Switch JR/JR
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	CC 01
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 05
1 x	30 cm BEC cable (female)
1 x	BEC 3A FOXY
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Connector CAN 15
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Connector Sub-D 2+5 Female
1 x	Connector Sub-D 2+5 Male
1 x	Cabel charger transmitter GRAUPNER
1 x	3 LiPo XH>EH adapter
1 x	Motor DLE 200cc Premium Muffler
1 x	Motor DLE 200cc Std
1 x	Small Crow DLE-170M
1 x	Red smoke canister 65 g
2 x	White smoke canister 140 g
1 x	Ball link M2,5 (10 pcs)
2 x	M3 Maxi ball link (2 uds)
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	AX-60 starters (5 pcs)
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Ventral support for AX-18/AX-60
2 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
2 x	M3 Maxi ball link (2 uds)
1 x	Smoke set "S"
1 x	ABS angle 4,0x4,0x1000 mm
2 x	Remote electric ignition system
2 x	Black smoke bombs AX-60 (5 pcs)
1 x	Profile ABS half cane 3x1000 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
2 x	Green smoke canister 100 g
1 x	Socket head ball link M3 (2 uds)
1 x	Socket head long ball link M3 (6 uds)
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Electric rocket starters (6 pcs)
1 x	White smoke bombs AX-3 (10 pcs)
2 x	Joint with bearing M2,5 22x5,5
1 x	Parachute expulsion foam
1 x	White smoke bombs AX-9 (10 pcs)
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	PCARD Wireless System
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
2 x	3l Smoke oil
1 x	Profile ABS Square 2 x 1000 mm
1 x	B4-0 rocket charges (6 pcs)
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
2 x	Green smoke canister 65 g
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
2 x	Short ball link M2 (6 uds)
1 x	Smoke set "Glider"
2 x	Socket head ball link M3 (2 uds)
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Joint with bearing M2 22x5,5
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Long ball link M2 (6 uds)
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Ball link M3 RPA's-UAV's
1 x	Profile ABS Square 1 x 1000 mm
2 x	White smoke canister 65 g
1 x	Red smoke canister 140 g
1 x	ABS angle 10,0x10,0x1000 mm
1 x	M2,5 5Diam black ball link V2 (2 pcs)
2 x	AX-60 starters (5 pcs)
1 x	Smoke set "M"
1 x	Red smoke canister 100 g
2 x	Ball link M3 (6 uds)
2 x	Initior Transmitter FTX2 Wireless
2 x	Xplorer4 anemometro
1 x	Spray adhesive AEROFIX 2
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	Nitroverdu 500 ml
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Screwdriver for Hexagon 1,5mm
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Copier 2x20 cm pcs
1 x	Z Bender - S Type Tool
1 x	Ball Link Plier
1 x	Starter 12v (Max 90 and 15ccm)
1 x	2,0x50 mm allen screwdriver
1 x
1 x	Crimping tool
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Cut tube
1 x	Hot Glue Stick RED
1 x	Hot Glue Stick GREEN
1 x	Hot Glue Stick BLACK
1 x	Starter EM Gear Power 80
1 x	Ball Link Plier
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Shirt Hispano Aviación
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Initior Receiver FRX2 Wireless
1 x	Green smoke canister 140 g
1 x	"S" set for planes
1 x	Parachutist
1 x	Blue smoke canister 140 g
1 x	Retract undercarriage for gliders up to 3,5 Kg
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	Ball link M1.6 (6 uds)
1 x	Starter EM Gear Power 250
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	PROXXON - SAW BLADE 8MM 0ZI220E
1 x	Mudguard wheels 112/127 mm
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	Metal ring front FEMA
1 x	Short ball link M3 (6 uds)
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	Short ball link M1.6 (6 uds)
1 x	Xplorer3 anemometro
1 x	Sealing Iron STANDARD
1 x	OPTOTRONIX Aurora LCU
1 x	EWC3 100 cm wing connector
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	DPSI Ampere battery backer

10,906.64EUR