119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

2 x	Connectors banna oro 3,5 mm (M/F)
2 x	2 mm male connector (2 pcs) with safety connector
2 x	Connectors DEANS (T)
1 x	Connectors banna oro 2 mm (M/F)
1 x	2 mm female connector (2 pcs) with safety connector
2 x	30 cm DEANS female connector
2 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Conector JR Servo male (10 pcs)
1 x	30 cm MULTIPLEX female connector
1 x	Conector FUTABA Servo male (10 pcs)
1 x	Conector FUTABA Servo female (10 pcs)
1 x	Conector JR Servo female (10 pcs)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Conector FUTABA Servo male BLUE silicon (10 pcs)
2 x	Connectors banana oro 6,0 mm Ultralight (M/F)
2 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Conector Servo female 4 pines
2 x	Connectors DEANS (T) micro
1 x	Conector JR/Uni Servo male BLUE silicon (10 pcs)
2 x	Connector CAN 15
1 x	Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x	Conector JR Servo female (10 pcs)
2 x	Connectors banna oro 8,0 mm (M/F)
2 x	Conector BEC male (10 pcs)
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Bag connector 2 mm
2 x	Connectors DEANS 4 pins (1 pair)
1 x	Connectors banna oro 4 mm (M/F)
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	Gold antispark 5,5 mm plug
1 x	XH female balance (5S) connector (2 pcs)
2 x	Connectors banna gold 5,5 mm (M/F)
1 x	XH female balance (3S) connector (2 pcs)
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	XH male balance (5S) connector (2 pcs)
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	XH male balance (4S) connector (2 pcs)
2 x	ABS Strip 1.5x6.0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Round Rod 2,5x1000 mm
2 x	Round Rod 3,0x1000 mm
2 x	ABS Strip 1.5x2.0x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Round Rod 1,0x1000 mm
2 x	Strip 2,5x1,25x330 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
2 x	ABS Strip 1.0x5.0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
4 x	Strip ABS 2.0x5.0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	Nitroverdu 500 ml
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Release wax 250ml
1 x
1 x	Spray Graphit 33
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	Painting GHT Lexan Black 150 ml
1 x	Spannlack 1000 ml
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	20x200 mm battery rings
1 x	Tape GFK 38 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Tape GFK 25 mm
1 x
1 x	Tape GFK 50 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Foil for sticking flaps and ailerons
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Marker ties (20 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 240 mm (2 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	Cinta Goldfix 1m
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	CC 03
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	MPX-Dean "T" Adapter
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	USB HLS prog. interface
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	30 cm BEC cable (female)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	BEC 3A FOXY
1 x	5 LiPo XH>EH adapter
1 x	30 cm BEC cable (male)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	JETImodel SINGLE BEC
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	CC 05
1 x	CM-3
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	4 LiPo XH>EH adapter
1 x	Socket head long ball link M3 (6 uds)
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Extension silicon 75 cm (Graupner)
1 x	Connectors MPX male (PIN double)
1 x	Conector BEC female (10 pcs)
1 x	3x8W Triple-Spotlight, 12mm, T-Fuse White
1 x	Contacto macho pin conector (10 pcs)
1 x	Protector Connector MPX (1 pair)
1 x	Carbon plate 350x150x1.0 mm
1 x	XT60 Connector with Holder Male 2pcs
1 x	XT-90 connector (pair)
1 x	Kontronik connector (10 connectors, 5 pairs)
1 x	Jet Afterburner Simulator NF-Jet1RY Set
1 x	Jet Afterburner Simulator NF-Jet3 YSW
2 x	ABS Strip 1.5x8.0x1000 mm
1 x	MPX Support (2 pcs)
1 x	Support Filtro FESTO
1 x	Recessed MPX connector support (6 pcs)
1 x	XH LiPo extension lead
2 x	Round Rod 6,0x1000 mm
1 x	Strip 3,5x1,75x330 mm
1 x	NF-3X-80 liner Kit
1 x	Connectors MPX black female
1 x	MPX PCB "Gender-Changer (5 pcs)
1 x	Angle support XT60 conector
1 x	Mounting frame MPX male connector
1 x	Conector MT-60 (pair)
2 x	ABS Strip 1.5x4.0x1000 mm
1 x	4Wx2 Power Navigation Light, 13mm, T-Fuse White
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	NF-3 RC set
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green
1 x	Optotronix Aurora Plug
1 x	MR30 connector male
1 x	Round Rod 1,25x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	Resistor 3W 5% OR47
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	MPX Sub-D Adaptor
1 x	Cover cap drop-shaped paintable 43 mm
1 x	DPSI Ampere & Voltage bundle

3,462.56EUR