119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

2 x	Parachute BACKUP X100
1 x	Motor DLE 200cc Std
1 x	Windsock Ozone L -1200 mm
1 x	Parachute PV6 for F3J
1 x	Motor DLE 430 cc - Paramotors
1 x	Softshell Hispano Aviación
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	LUCAS pilot ARTF
1 x	Silent-blocks DLE 170M
1 x	SCHARNHORST Battleship 1:200
2 x	Wing OXY 0,5 pulgadas2
1 x	Tirpiz Battleship 1:200
1 x
1 x	Vest clothes Hispano Aviación
1 x	Me-163
2 x	Paramotor BackPack XXS 2
1 x	Motor DLE 200cc Premium Muffler
1 x	Shirt Hispano Aviación
1 x	Big Crow DLE-170M
1 x	Cap Hispano Aviación
3 x	Aramid 50 daN 50 m
1 x	Parachute P4
1 x	Rescue 1,8m2 / BackPack
4 x	Paramotor Trike XL
2 x	Wing OXY 5,0 m2
2 x	Set cintas unión paracaídas 145 cm
2 x	MAX pilot ARTF
2 x	Paramotor BackPack XXS (without accessories)
1 x	7.94 x 4.76 mm tygon tube 1 m
1 x	Extra hard 1500 ccm complete gasoline fuel tank
1 x	Electronic double valve landing gear
1 x	Blue "FUEL VENT" round aluminum overflow socket
1 x	550 cc gasoline fuel tank complet
1 x	1000 ccm gasoline fuel tank
1 x	Black "FUEL VENT" round aluminum overflow socket
1 x	Extra hard 250 ccm complete gasoline fuel tank
1 x	EXTREME FLIGHT BLACK MAGNETIC ROUND FILLER PLUG
1 x	1000 ccm complete gasoline fuel tank
1 x	Black "FUEL VENT" round aluminum overflow socket
1 x	Deposito combustible tipo "turbina" 330 ml
1 x	700 ml complete glow fuel tank
1 x	"Taxi Tank" Fuel Tank
2 x	Lunak ARF 2000 mm Yellow (Hacker Model)
1 x	Mini DART 2 F3K carbon light 1m Green
2 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	2,0x50 mm allen screwdriver
1 x	Dust collector for mould cleaning
2 x	Vacuum pump 12 CFM
1 x	Copier 5x20 cm pcs
1 x	1,5x50 mm allen screwdriver
1 x	Starter 12v (Max 90 and 15ccm)
2 x	Hot Glue Stick BLACK
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Screwdriver for Hexagon 1,5mm
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Cockpit plastic closing
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Windsock Ozone L - 700 mm
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Steering arm 16 mm Ø 4 mm
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Steering arm 16 mm Ø 3 mm
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Opale Rucksack
1 x	Locking cable tie 4.6x203 (uds)
1 x	One touch canopy lock
1 x	Covered closure or fairings
1 x	Trike XL motor set (motor+esc+prop)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Screw-lock connector M2 (2 uds)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Para-RC Trike "RC-Bullix"
1 x	SUS wire 3m (nylon coated)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
2 x	Servo Arm aluminium ALU-STAR
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
2 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	4 LiPo XH>EH adapter
1 x	Ball link M3 RPA's-UAV's
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	Surprise XII Rudder (Freudenthaler)
2 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Avanti XS Jet , Tricolore Canopy
1 x	Avanti S Jet, Kerosene+Smoke Tank(SebART)
1 x	75 mm
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	BALSA triangular 10x10x1000 mm
1 x	Catalog AERO-NAUT 2016
1 x	SunCover 2.6 Class (SebART)
1 x	Motor DLE 170 M- Paramotors
1 x	Sukhoi 29S 2,6 m Yellow/Black (SebART)
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	Bidule 55 V3 2460 mm
1 x	CARBON CUB 15cc ARF 2280 mm
1 x	SKY MASTER 3.000 mm ARF
1 x	Jeemo Dolly
1 x	Bearing housing
1 x	LA500 nose
1 x	Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport
1 x	Head lower part
1 x	Complet landing gear
1 x	USB Interface Adapter
2 x	Blade holder center
1 x	Head upper part
1 x	8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x	LA500 rotor head core
1 x	Lense for Spotlights, 20mm
2 x	Refueling Cup V2 Blue
1 x	TYGON tubo 15 m Diam. 3.4 x 2.0 mm
1 x	double Fuel Dot V2 (silver)
1 x	DLE 55 Muffler
1 x	A50 Backmountset complete
2 x	Support 45% Hopper JetsMunt
1 x	Valvula One way
1 x	Refueling Cup V2 Red
1 x	T-Hose connector 3-3-3 mm
1 x	Muffler DLE 20-RA
1 x	Canister combo DLE 170 cc
1 x	Cylynder DLE 20-RA
1 x	Tubo silicona transparente 7 x 3 mm (1m)
1 x
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Hardener Aero EPH 161 (500 g)
1 x	X-RAY Micro QR
1 x	THERMIK XL 4000 mm
2 x
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	VTX 477 Carbon Rotorblade
1 x	Tail boom brace LOGO 480
1 x	9x4.7 * 22x12 carbon propeller
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Xoar Electric Beechwood Prop 12x6
1 x	Hardener Aero EPH 161 (250 g)
1 x	Xoar Electric Beechwood Prop 21x10
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	500 ccm complete gasoline fuel tank
1 x	Hacker A30-S Radial Set
1 x	Tachometer Hyperion Multi-pala
1 x	Central support Speed 280
1 x	55% silver electrodes (2 pcs)
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	BEC extension JIVE
1 x	Sealing Iron Sleeve PROF
1 x	3,0x60 mm allen screwdriver
1 x	Latex Gloves GRIP, size L, box/ 100 pcs
1 x	Concave-Convex sandpaper file 13 mm
1 x	Rocket cardboard tube 50mm x 48mm x 250mm
1 x	460 mm EPP Floats
1 x	KIRA 600-20
1 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	KIRA 480-31 5,2:1
1 x
1 x	KIRA 600-22 6,7:1
1 x	Fan for A60
1 x	Sealing Iron STANDARD
1 x	Handle for PERMAGRIT lime
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	Sealing Iron Profi LCD
1 x	Steel brush wheel with 2.35mm
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Cooler motor type 150
1 x	Hobbylite Filler, Balsa colour
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	1000 ml sealer (DOPE)
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	CENTRAL PROPELLER BOLT FOR DLE85/111/120
1 x	DLE 111 pipe plug
1 x	DLE 30 complete electronic ignition
1 x	Ball bearing 6002 DLE
1 x	DLE Ignition 111/120/170
1 x	DLE 85/111/120 Crankshaft keyway
1 x	Head spacer
1 x	Nut M2
1 x	Cierva C30 simulated motor
1 x	Motor holder for AC 28/7
1 x	Laminating brush 10 mm, pack/ 50 pcs
1 x	Hot Glue Stick GREEN
1 x	Universal Filter
1 x	KIRA 480-26 5,2:1
1 x	Ø 40 mm fiberglass motor-holder for electric motors
1 x	DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x	Crimping tool
1 x	KIRA FAI 5F5/4s
1 x	KIRA 500-30 6,7:1
1 x	Adapter SPEED 480
1 x	A60 Motor Mount Alu complete set
1 x
1 x	KIRA 400-39 5,2:1
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Aramid fibre shears Proton®, 21 cm / 8" length
1 x	Kit hydraulic brake
1 x	PROXXON - SAW BLADE HSS (50MM - 100T) (28020)
1 x	KIRA 400-34
1 x	Tube bender
1 x	Metalic motor holder for class 550-600
1 x	Cooler motor type 300
1 x	Tachometer HANGAR 9 digital
1 x	Vacuum pump P1-N
1 x
1 x	Radial heatsink for MPJ AC25/35-xx motor
1 x	KIRA 480-38
1 x	PROXXON - SAW BLADE DIAMOND OZI/E
1 x	Schul-Malpinsel Gr.5
1 x	Motor 2212 (1000KV) Quadcopter F450
1 x	Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x	KIRA 600-30 6,7:1
1 x	Size "M" motor holder for class 400
1 x	Allen wheel collar M3x3
1 x	Aceite turbina JetsMunt 1 litro
1 x	Tip wing protector 30x10 (2 pcs)
1 x	KONDOR 15-92
1 x	Allen wheel collar M3x5
1 x	Motor Mega AC 22/45/02 E

39,103.80EUR