119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Clip fixing for wing (2 pcs)
1 x Clip mini fixing for wing (2 pcs)
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x Round Rod 6,0x1000 mm
1 x Strip 2,5x1,25x330 mm
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Para-RC Mix
1 x MAX pilot ARTF
1 x Aramid 50 daN 50 m
1 x Windsock Ozone L -1200 mm
1 x Parachute BACKUP X100
1 x Para-RC Trike "RC-Bullix"
1 x Rescue 1,8m2 / BackPack
1 x Parachute PV6 for F3J
1 x Opale Rucksack
1 x Paramotor BackPack XXS 2
1 x Parachute P4
1 x LUCAS pilot ARTF
1 x Windsock Ozone L - 700 mm
1 x Release wax 250ml
1 x Plasti Dip Liquid Tape 429 ml black
2 x 20 g tin paste
1 x 500 ml sealer (DOPE)
1 x Universal Colour Paste deep black 50 g
1 x Nitroverdu 500 ml
1 x Spray adhesive AEROFIX 2
1 x Universal Colour Paste white 50 g
1 x Spray EC Red 400ml
1 x Black silicone 1,0 qmm wire (50 m)
1 x Extension silicon 50 cm (Graupner)
1 x Cable set Premium™ MAXI "one4two"
1 x 100m servo "Premium" wire (white/red/blue)
1 x Extension silicon 75 cm (Graupner)
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Extension 15 cm (Futaba)
1 x Premium servo extension 100cm
1 x Cable S.BUS 3 salidas 100 mm
1 x Extension MPX-MPX 20 cm
1 x Extension silicon 30 cm female (Graupner)
1 x Extension PVC 150 cm (Graupner)
1 x 50m servo "Premium" wire (white/red/blue)
1 x Protective Cover for wires Ø 10 mm 1000 mm
1 x Cable set PREMIUM, fuselage/wing
1 x Circlick securite
1 x Protective Cover for wires Ø 3 mm 1000 mm
1 x Extension 90 cm (Futaba)
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Extension silicon 25 cm (Graupner)
1 x Fiberglass heat shield Ø 4 mm 1000 mm
1 x Extension silicon 10 cm (Futaba)
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Slave-cable USB Easy Sim
1 x ABS 500 x 400 x 2,0 mm (white)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x ABS 500 x 400 x 1,5 mm (white)
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Buy Perforated film 145 cm / 50 m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Buy Perforated film 100 cm / 50 m
1 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Buy Perforated film 100 cm / 20 m
1 x Aluminium sheet 500x250x0,5mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Carbon fibre sandwich sheet 350x150x3 mm
2 x Hot Glue Stick BLACK
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x LA500 cyclic central part
1 x LA500 pre-rotation gear
1 x LA500 rotor head core
1 x Piñon motor rotor LA-500
1 x OPTOTRONIX Aurora LCU
1 x Recessed MPX connector support (6 pcs)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x DPSI RV Mini 5 Magic
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x Aluminium servo arm (2 uds)
1 x Hobbylite Filler, Balsa colour
1 x Xplorer1 anemometro
1 x DPSI Micro - RCS RV
1 x Magnetic Connect locking system
1 x DPS Switch JR/JR
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Soporte filtro FESTO (4 pcs)
1 x Ball link Aluminio M3 (2 pcs)
1 x AC-10 pre-rotacion with motor
1 x Tapa estado carga XT-60 (6 pcs)
1 x Xplorer4 anemometro
1 x Trike XL motor set (motor+esc+prop)
1 x Hot Glue Stick GREEN
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x DPSI RV Mini 5 (2008)
1 x Filter Capacitor JR
1 x DPSI RV Mini 6 Magic
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Support FUEL DOT V3
1 x Soporte grifo FESTO vertical (1 pcs)
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
7,504.11EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies