79.90EUR

Conector alas/fuselaje PWC6 para 6 servos
[EMCA85221]

PWC6 PowerWingConnector for 6 servos with fuselage socket

Product description and features
Easy to handle plug system for wing wiring and up to 6 servos.
Please note:
Plus and minus pole are combined for all connected consumers.
The PWC6 wing plug must be screwed between wing and fuselage. On the pin strip inside the wing the servo cables can easily be plugged and secured with the enclosed shrinking hose.
The PWC6 fuselage socket is placed inside the fuselage. On the pin strip the patch cables to the receiver can be connected. Also this plug connection can be secured with the enclosed shrinking hose.
PWC PowerWingConnector system's advantages
Reverse polarity protection
Vibration safe connection because of locking
Easy mounting due to packaging
No soldering necessary
Up to 22A permanent current
Delivery contents
1 PWC6 wing plug, 1 PWC6 fuselage socket and 2 shrinking hoses.

Notice: Plus and minus pole are combined for all connected consumers. When used with a JETI Duplex Central Box (100/200/220/400), the overcurrent protection of the servo slots is bridged.

Bajo pedido

Comentarios

Clientes que compraron este producto, también han comprado

Hélice MENZ-S 20x10 Bajo pedido	Conector banana oro 2 mm Bajo pedido	Hélice MENZ-S 22x8 Bajo pedido
Interruptor magnético MPS para encendido Bajo pedido	Helice APC 8x4 Electric Bajo pedido	Conector XT-90 (pareja) Bajo pedido

Búsqueda Rápida

Cesta de Compras

1 x	Autogiro Cierva C30 Spain
2 x	Anemometro Xplorer1
3 x	Anemometro Xplorer4
1 x	Canadair CL-415 (aero-naut)
1 x	PBY 6/6A Catalina, Cúpula de observación (I + D)
1 x	Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
1 x	Camara 800 TVL CMOS para FPV
1 x	Servo Fork
1 x	Rodamiento 3x8x4
1 x	Arandela de la rueda
1 x	Rodamiento 3x6x2,5
2 x	Mamparo posterior
1 x	Bolas 4mm
1 x	Pegatinas Cierva C30 versión española
1 x	Tornillos M1,6x6 Allen
1 x	Núcleo del rotor
1 x	Tren de aterrizaje completo
1 x	Tuerca M2
1 x	Palas de autogiro de 330 mm
1 x	Parte inferior del rotor
1 x	Motor DLE 200cc Std
1 x	Helice FALCON 32,5x11 PUSHER Carbono
1 x	Motor DLE 170 M - Paramotores
1 x	Motor DLE 430 cc - Paramotores
1 x	Motor DLE 200cc Premium Muffler
1 x	Bisagra cilíndrica 67 mm Ø 4,5 mm (5 pcs)
1 x	Juego de 4 palas
1 x	Varilla ABS 5,0x1000 mm
1 x	Perfil de ABS "T" 10.0x10.0x1000 mm
1 x	Soporte para aviones
1 x	Tapon deposito 18mm (Espiga doble integrada)
1 x	Rueda Jets 115x29 (4.50") centro aluminio
1 x	Arandelas 2.2×4
1 x	Empenaje de cola LA500
1 x	Bearing housing
1 x	Hub corona pre-rotación LA500
1 x	Piloto LA 500
1 x	Carena delantera LA500
3 x	Anemometro Xplorer3
1 x	Motor simulado Cierva C30
1 x	Bujía ROSSI R8
1 x	Bujía motor OS Tipo F
1 x	Soporte bomba/flitro Xicoy X45
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Cable RX externo para recetores estándar
1 x	Soporte tubo Ø 6mm (10 pcs)
1 x	TWIST planeador gomas
1 x	Soporte conector MPX enrasado (6 pcs)
1 x	Bird (Aero-naut)
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 15 m
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Cianocrilato CA Glue (medium) 20g
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Agente espumante para resinas epoxycas 200g
1 x	Acelerador Aero EPH 161 (250 g)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m
1 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
1 x	Anemometro Xplorer2
1 x	Bascular < 40 Kg
1 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (10 pcs)
1 x	Bateria LiIon 3000 mAh 3.3v 15A (2 pcs)
1 x	Brazo servo aluminio V1-Futaba 17 mm M2 rojo
1 x	Brazo servo aluminio V1-Futaba 15 mm M2 rojo
1 x	Arandela conica ancha alumino M3 oro (4 pcs)
1 x	Bancada servo tandem 4,5-5" para 2 servos
1 x	Bomba Combustible RX V2
1 x	Bridas 1,66x71 / 0,07x2,8"mm (20 pcs)
1 x	Adhesivo Leds 2x2 ml

15,415.46EUR