18.00EUR

EWC3 100 cm wing connector
[EMCA85082]

EWC3 100 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	M3-M4 rubber washer (8 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
2 x	M3 black washers (4 pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
2 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
2 x	Lock washer 3.2 mm (20 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	SUS wire 3m (nylon coated)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Covered closure or fairings
1 x	Locking cable tie 2.5x100 (uds)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	One touch canopy lock
1 x	Cap closure 33/23.5mm (2 uds)
1 x
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Hot Glue Stick BLACK
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Screwdriver for Torx® TX8
1 x	Z Bender - S Type Tool
1 x	Ball Link Plier
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Copier 5x20 cm pcs
1 x	Dust collector for mould cleaning
1 x	Parachute BACKUP X100
1 x	SE Ring 200 mm (2 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x
1 x	Spikes Band (5 m)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Windsock Ozone L -1200 mm
1 x	Tape GFK 38 mm
1 x	Tape GFK 25 mm
1 x	Wing OXY 0,5 pulgadas2
1 x	Rescue 1,8m2 / BackPack
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	LUCAS pilot ARTF
1 x	SE Ring 250 mm (2 pcs)
1 x	Ballast 700gr OPALE
1 x	20x200 mm battery rings
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Marker ties (20 pcs)
1 x	Para-RC Trike "RC-Bullix"
1 x	20x1000 mm Ring Strap Back To Back
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	SE Ring 300 mm (2 pcs)
1 x	SE Ring 350 mm (2 pcs)
1 x	Parachute P4
1 x	Aramid 50 daN 50 m
1 x	MAX pilot ARTF
1 x	Paramotor BackPack XXS (without accessories)
1 x	Tape GFK 50 mm
1 x	Opale Rucksack
1 x	Foil for sticking flaps and ailerons
1 x	Parachute PV6 for F3J
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Set cintas unión paracaídas 145 cm
1 x	SE Ring 400 mm (2 pcs)
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	1/6 Pilot "Buddy"
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Piloto JET 1:3,5
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	1/7 Pilot "Japanese"
1 x	1/12 Pilot "Langley"
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	1/12 Pilot "Tom"
1 x	1/6 Pilot "Tony"
1 x	Piloto jet 130 mm
1 x	1/10 Pilot "Jimmy"
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Pilot "Goose" (Slimline)
1 x	1/6 Pilot "Garry"
1 x	1/10 Pilot "Jack"
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	1/6 Pilot "Cindy"
1 x	Horn 5/15 with M2 Bearing
1 x	Horn with ball 40x30
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Horn with ball 55x40
1 x	6 mm aluminium horn with patella
1 x	SlowFlyer control horn (3 pcs)
1 x	6 mm red aluminium threaded horn with patella
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	RH long aluminium horn (2pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Horn 6/20 with M3 Bearing
1 x	Small aluminium horn gold (2pcs)
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	EasyFLY Addon
1 x	SIMtransmitter 6 Mode 2
1 x	Tapping Screw M2.2x65 (10 pcs)
1 x	Tapping Screw M2.2x13 (10 pcs)
1 x	Pan Head Screw M2x8 PH countersunk head
1 x	DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x	EWC3 100 cm wing connector

5,041.61EUR