18.00EUR

EWC3 100 cm wing connector
[EMCA85082]

EWC3 100 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Double conector with JR adapter and 200 mm extension
1 x	CC 03
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Connector Sub-D 2+5 Female
1 x	30 cm BEC cable (male)
2 x	2 LiPo XH>EH adapter
2 x	CM-3
2 x	30 cm BEC cable (female)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x	Connector CAN 15
1 x	CC 05
1 x	5 LiPo XH>EH adapter
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	BEC 3A FOXY
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Dean "T" - Futaba Adapter
1 x	3 LiPo XH>EH adapter
1 x	4 LiPo XH>EH adapter
2 x	DPS Switch JR/JR
2 x	Connector Sub-D 2+5 Male
1 x	Oracover White 2 m
1 x	Oracover Yellow CUB 10 m
1 x	Ply-Span 450x600/13g Red
1 x	MYLAR film A350 (1000x500 mm)
1 x	Ply-Span 450x600/13g Orange
1 x	ORACOVER Ferrari red (2 m)
1 x	Oracover CARBON Metalic 1 m
1 x	Oracover Green10 m
1 x	Ply-Span 450x600/13g Black
1 x	Oratex Antik 2m
1 x	ORACOVER Fluor red (2 m)
1 x	Oracover CHROME 2m
1 x	Oracover Azul Cielo 2 m
1 x	PROFICOVER 5m
1 x	Oracover ROYAL RED 2m
1 x	Oracover Black 2 m
1 x	Adapter lead MPX/EC3
1 x	Cabel charger transmitter GRAUPNER
1 x	Circlick securite
1 x	DPSI Ampere battery backer
1 x	Cabling for Fox MDM1 wings
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	Extension MPX-MPX 20 cm
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Cable set PREMIUM, fuselage/wing
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Protective Cover for wires Ø 20 mm 1000 mm
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Extension silicon 100 cm (Graupner)
1 x	Extension silicon 100 cm (Futaba)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	5 mm M2 variable horn
1 x	Horn 6/20 with M3 Bearing
1 x	6 mm M3 variable horn
1 x	Cabel "Y" 30 cm (graupner)
1 x	Extension 15 cm (Futaba)
1 x	Extra long horn 60x30
1 x	Control horn long w/ball
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Optical RPM Sensor
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	6 mm aluminium horn with patella
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Extension lead 15 cm Multiplex
1 x	Horn mando long (2 pcs)
1 x	Extension silicon 50 cm (Futaba)
1 x	Extension silicon 30 cm female (Futaba)
1 x	DYNAMOMETER S-1580
1 x	Extension silicon 10 cm (Futaba)
1 x	Extension 7.5 cm
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Cabel "Y" 15 cm
1 x	5 mm M2 variable inclined horn
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Extension PVC 150 cm (Graupner)
1 x	Extension silicon 75 cm (Futaba)
1 x	Extension silicon 50 cm (Graupner)
1 x	Adjustable brass horn threaded M3
1 x	Electronic switch JETI SP6 0-15v/6A
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	Fixed launching hook
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	SBEC Jeti
2 x	TP/TopFuel - XH 2/3S Adapter
1 x	SPARK Switch 7.4v
1 x	UBEC 6A KAVAN
1 x	USBCOM 5i
1 x	Heat sink for Optotronix LEDs
1 x	DPSI RV Mini 6 Magic
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	Filter Capacitor JR

3,288.64EUR