21.00EUR

Heat-conducting adhesive (2x2ml), WLK DK 4
[HKA30000]

Heat-conducting adhesive (2x2ml), WLK DK 4

Product description
The heat-conducting adhesive from Fischer Elektronik is suitable for the safe and thermal bonding of electronic components such as high-power LEDs or mechanical components. It is a temperature-resistant, impact-resistant, solvent-free and thermally conductive epoxy-based two-component adhesive filled with aluminium oxide with a short pot life. The heat-conducting adhesive bonds porous and non-porous surfaces of metals, glass, ceramic materials and almost all plastics. The mixing (1:1) of hardener and binder is done by a static mixing tube with Luer-Lock system.

Features
Thermal conductivity 1 W/mK
Mixing ratio: 1:1
Temperature range: -50° C to +145° C
Curing: approx. 16 hours at room temperature, 4 hours at 60° C
Further processing: after approx. 4-6 hours (depending on layer thickness)

Delivery contents
1 syringe 4ml and 3 mixer WLK M 4.

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 9.0x8.0x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Medidor ángulos y/o incidencias
1 x	ABS tube 2.0x1.0x1000 mm
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Angle measurer
2 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 8.0x6.0x1000 mm
1 x	ABS tube 5.0x4.0x156 mm
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	ABS tube 3.0x1.0x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Propeller balancer
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Surface Indicator Gauge Small
1 x	Angle of incidence meter
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
2 x	Propeller balancer
1 x	Field folding model stand SebArt
1 x	Field folding model stand
1 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 6.0x4.0x1000 mm
2 x	WingFix ULTRA Black Edition
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
2 x	ABS tube 7.0x6.0x1000 mm
1 x	6 mm red aluminium threaded horn with patella
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Beech dowels 4.0 x 1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Horn 5/15 with M2 Bearing
1 x	Walnut wood slat 2.0x2.0x1000 mm
2 x	Pine wood slat 2.0x2.0x1000 mm
1 x	SlowFlyer control horn (3 pcs)
2 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Small aluminium horn blue (2pcs)
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Horn with ball 55x40
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Horn for flap control (1 pcs)
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
2 x	BALSA trip 2.0x2.0x1000 mm
1 x	20 mm carbon horn
1 x	Horn 6/35 with M3 Bearing
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Cable with accesories
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	LightBox SR
1 x	USB Mini Camera endoscope
1 x	800TVL CMOS camera for FPV
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Combo lighting module with covering drop shape
1 x	Conector BEC male (10 pcs)
1 x	Extension 90 cm (Futaba)
1 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	ABS tube 18.0x16.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Support Flush MPX Conector (6 pcs)
1 x	Support conector MPX (6 pcs)
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm)
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x	Jet Afterburner Simulator NF-Jet2YY Set
1 x	Jet Afterburner Simulator NF-Jet2
1 x	Complete kit CAT 966G II WEDICO-construction-models
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Control horn long w/ball
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Short adjustable control horn 3x24
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Kit wheel loader 966G II without electrics, without hydrauli
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	Spinner INO 51 mm Chrome (Imitacion metal)
1 x	Long horn 50x26
1 x	Micro control horn (2 pcs)
1 x	Ferrita 14x8x5.5 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Ferrita con funda
1 x	ABS tube 5.0x3.0x1000 mm
1 x	ABS tube 8.0x7.0x1000 mm
1 x	DPSI LR-S (with push buttons)
1 x	DPSI V-Match
1 x	Fuel Dot (RED)
1 x	RX cabel
1 x	DPSI magnetic switch actuator (housing)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Allen wheel collar M4x6
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Landing gear frontal support 25x32x16
1 x	Split M1,2x10 (10 pcs)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	AXI 2814/10 V2 Long
1 x	AXI 2826/6 V2
1 x	DPSI Ampere & Voltage bundle
1 x	EWC3 100 cm wing connector
1 x	Fuel Dot (Black)
1 x	DPSI OCP Overload protection
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x	Filter Capacitor JR
1 x	Heat sink for Optotronix LEDs
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch

11,717.44EUR