229.00EUR

PowerBox Evo
[POWER4250]


PowerBox Evo
Product description
The PowerBox Evo is an ultra-compact dual power supply featuring 7 channels, regulated output voltage and telemetry.
The 7 inputs are assigned to 10 outputs, allowing two servos to be controlled in parallel on each of 3 channels, without requiring additional Y-leads. All servo outputs have integral signal amplification and are protected against servo feedback currents.
The PowerBox MicroSwitch included in the set is not subject to wear, and operates both electronic switches reliably. It is also used to set the output voltage and the battery type.
By default the two high-performance voltage regulators deliver 6.0V, but that value can easily be changed to 7.4V, 7.8V or no regulation at all using the PowerBox MicroSwitch.
The machined aluminium heat-sink ensures a high continuous load capacity.
The PowerBox Evo supports all current telemetry systems: PowerBox, Jeti, Futaba, Multiplex, Graupner, Spektrum and JR, which means that the voltage of both batteries can be monitored conveniently from the transmitter. It is also possible to read off the state of charge of the batteries at any time using the two tri-colour LEDs.

Features
7 channels
10 outputs
High-performance battery backer with high continuous load capacity
All power electronics duplicated
Redundant electronic switch
Four selectable output voltages: 6.0V, 7.4V, 7.8V or unregulated
Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum, SRXL2, Multiplex M-Link, JR X-BUS and Graupner HoTT
All features can be controlled from PowerBox and Jeti transmitters
Signal amplification for all 10 outputs
Voltage indication by means of tri-colour LEDs
Supports four battery types: LiPo, LiIon, NiMh/NiCd, LiFe
Servo feedback current suppression
Machined high-performance heat-sink for optimised heat dissipation
Machined, anodised aluminium switch case
Compact format
Technical Data
Operating voltage 4.0V - 9.0V
Power supply 2S LiPo, 2S Lilon, 2S LiFePo, 5S NiMH
Current drain Power-on state 66mA
Current drain Standby 8μA
Maximum load current 2x10 A (<30s 2x 40A)
Drop-out voltage 0.3V
Output voltage 6.0V, 7.4V, 7.8V, unregulated
Signal input PWM
Supported RC systems PowerBox, Futaba, Jeti, Spektrum, Multiplex, JR, G
Channels 7
Servo sockets 10
Supported telemetry systems P²BUS, S.BUS2, EX-BUS, SRXL2, M-Link, Hott, JR-DMS
Dimensions 89 x 55 x 18 mm
Weight 69g
Weight Sensor Switch 8g
Temperature range -30°C to +105°C
Set contents
PowerBox Evo
MicroSwitch
8x patch leads
6x fixing screws
4x rubber grommets and brass sleeves
Operating instructions


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x Aluminium wide washer M3 red (4 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x 102 mm aluminium spinner
1 x Silicone 0,50 qmm servos wire Graupner(5 m)
1 x DLE 30 complete electronic ignition
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Spinner NUT M4
1 x CC 03
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x TrainerCord (master-learner)
1 x TP/TopFuel - XH 2/3S Adapter
1 x Adapter lead MPX/XT60
1 x Cabel charger transmitter GRAUPNER
1 x 1/6 Pilot "Garry"
1 x Compact on-board starting system (9724)
1 x Blind nut M4 (4 pcs)
1 x 1/12 Pilot "Fighter"
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Silicone 0,50 qmm servos wire Futaba (100 m)
1 x 50m servo "Premium" wire (white/red/blue)
1 x Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x 100x50 mm SLH KOVO wheel
1 x PVC 0,14 qmm servos wire Graupner (100 m)
1 x "Taxi Tank" Fuel Tank
1 x Blind nut M4 (10 pcs)
1 x CC 01
1 x Spinner Alumin. fixed propeller 40 mm / 3,0 mm
2 x Blind nut M5 (10 pcs)
1 x Spinner Alumin. fixed propeller 30 mm / 3,0 mm
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x Silicone red 0,25 mm² wire (25 m)
2 x 10m servo "Premium" wire (white/red/blue)
1 x Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x DLE Ignition unit
1 x Silicone 0,35 qmm servos cable Futaba (5 m)
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Opto Gas Engine Kill Switch
2 x 18m Fitting barb
1 x USB HLS prog. interface
1 x 12 mm floating pad (49 pcs)
1 x Compact on-board starting system (9512)
1 x White silicone 0,25 mm² wire (25 m)
1 x 1/12 Pilot "Tom"
1 x Spinner NUT M5
1 x RCEXL Electronic ignition twin A-02
1 x Silicone 0,35 qmm servos wire Graupner(100 m)
1 x GLOW 9C + accesories
1 x 1/6 Pilot "Buddy"
1 x 30 cm BEC cable (female)
1 x 2 LiPo XH>EH adapter
1 x White silicone 0,25 qmm wire (100 m)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x 1/7 Pilot "Japanese"
1 x Spinner Alumin. fixed propeller 40 mm / 3,2 mm
2 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x 1,6x1000 mm 2:1 red termoretract tube
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Suction funnel for carburetor 90D-M (red)
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Fuel bottle 500 ccm
1 x Spinner plastic white fixed propeller 30 mm
1 x Oracover Black 2 m
3 x SAITO FG-36 carburetor
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x 50 mm white plastic spinner for fixed propeller
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon plate 350x150x3.0 mm
1 x Glow starter with charger 230v
1 x 105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Carbon fiber rod 1.5 mm x 2000 mm
2 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
2 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x 42 mm white plastic spinner for fixed propeller
1 x Kavan Car 25% nitro 1l
1 x Tow hook for tug
1 x 37 mm PVC transparent battery termo-retract (1 m)
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Towing hook
1 x Extension Arm for Carburetor (red)
1 x 90 mm CFK long Spinner fixed by a central screw
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Silicone black 0,75 qmm cable ( 1 m)
1 x Connectors DEANS (T) micro
1 x Spinner Alumin. propeller pleg. 30 mm / 3,2 mm
1 x Metal gear set for HS85MG/5085MG
1 x Extension 5 lipos JST/C
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x Tren de cola carbono 50-70cc
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Horn 16,5x20 mm (2 pcs)
1 x MR30 connector female
1 x Xplorer2 anemometro
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x TYGON tubo 1 m Diam. 3.4 x 2.0 mm
1 x 1/10 Pilot "Jack"
1 x Blind nut M5 (4 pcs)
2 x 101x28 mm (4.0") Type jets aluminium core wheel
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x PARAGON Trainer 46-55 1580 mm
1 x BATTWIN BATTERY REDUNDANCY SYSTEM
1 x EXTRA 300 78" V3 Yellow/Red/Blue
1 x DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS
1 x 73x24 mm hard foam KOVO wheel (2 pcs)
1 x 89x25 mm (3.50") Type jets aluminium core wheel
1 x 110x55 mm SLH KOVO wheel
1 x 45x9 mm foam special light KOVO wheel with radius (2 pcs)
1 x 80x40 mm hard foam KOVO wheel
1 x 95 mm aluminium spinner.
1 x Electronic switch JETI SP06 Opto
2 x 76 mm aluminium spinner.
1 x GLOW 5C + accesories
1 x SPS 70V 100/200 A
1 x Metal gear set for HS81MG/5082MG
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Prolonguer for Balancer Thunder Power 6S
1 x Tapping Screw M2.2x13 (10 pcs)
1 x 38 mm aluminium spinner.
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x Cable Cargador FUTABA
1 x Spinner 90 mm GFK
1 x MPS Gas-Cap-Powerswitch
1 x Threaded insert M5 (10 pcs)
1 x Servo DL3017 Digi 17Kg-0.15s/60º
1 x Protective Cover for wires Ø 3 mm 1000 mm
1 x Horns set HS-65HB/MG, 5065MG
1 x Socket Head Screw M2x8
1 x Encendido CDI RCAME 1/4*32 Single 120º
1 x Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x Spinner 102 mm
1 x Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x Spinner 105 mm GFK
1 x Servos wing assembly set HS 80/81/82/85
1 x 89 mm double servo arm with bearing (2 pcs)
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Fiberglass heat shield Ø 4 mm 1000 mm
1 x Connectors MPX male
1 x Tapping Screw M2.2x9.5 (10 pcs)
1 x White aluminium 230 mm landing gear
1 x Two-function control switch + button by FUTABA
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x 63x12 mm foam special light KOVO wheel with radius (2 pcs)
2 x 51 mm aluminium spinner.
1 x 75 mm INO spinner (carbon imitation)
1 x 550 cc gasoline fuel tank complet
1 x 1/6 Pilot "John"
1 x 152x46 Ø6.0 mm aluminium core wheel
1 x 
1 x Glow Plug Clip 1.3 Ah
1 x Spinner plastic red fixed propeller 30 mm
1 x Compact on-board starting system (9713)
1 x GLOW 2C + accesories
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x PVC transparent red battery termo-retract 68 mm (10 m)
1 x SIG Coverall 1.2x4.5 m
1 x PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x SIG Coverall 1.2x0.9 m
1 x PowerBox Battery 4000
1 x PowerBox iGyro SAT
1 x PowerBox ROYAL SRS
1 x DOMINO 46-55 Trainer 1583 mm
1 x MicroMatch PowerBox
7,302.17EUR
Manufacturers
Languages
Español English
Currencies