Top » Catalog » PowerBox Systems » POWER3510

398.99EUR

PowerBox iGyro SRS + GPS Modul
[POWER3510]

The PowerBox iGyro SRS + GPS Modul is a completely new type of gyro system intended for fixed-wing model aircraft. At the development stage our constant aim was to combine maximum versatility with simplicity of operation. The system incorporates 8 regulatory algorithm specificaly developed for fixed wing models, whlch causes hardly any alteratlon in the model's famil ar flying characteristics; at the same time the eeroplane flies much mora smoothly and accurately, and is less sensitive to unwanted weather-induced or aerodynamic influences. The need for mixers, such as elevator to rudder or flaps, is eliminated entirely. The iGyro exploits the latest servo bus tecnology to minimise the extremely complex wiring arrangements necessitated by previous gyro systems. The ability to assign any channel to the gain edjusters makes it possible to set up the desired gyro effect accurately in just one short flight. Independent adjustment of each of the five outputs is possible, enabling the modeller to set up gyro gain and direction of effect precisely. The separate GPS Sensor provides 8 means of obtaining 8 constant gyro effect over the model's ful speed range, effectively eliminating the problem of over-compensation leading to oscillation in high-speed flight The control system is based on menus displayed on the graphic OLED screen, which makes short work of all set-up tasks.

Features:

- Extremely accurate triple-axis MEMS sensor.
- Special regulatory algorithm designed for fixed-wing model aircraft.
- Three-stage flight phase switching.
- Three axes distributed to five servos, each adjustable independently.
- GPS-regulated gyro gain.
- Integral delta mixer.
- Can be installed in any attitude.
- Graphic OLED screen with 128 x 64 pixels.
- Ultra-simple menu-controlled programming method using the SensorSwitch.
- SRS technology for use with various bus systems: Futaba S-Bus, Spektrum DSM2 / DSMX, HoTT, M-Link and Jeti.
- Unrestricted channel assignment (channel mapping).
Digital output can be passed on to an SRS PowerBox system.
- 16-bit processor for fast, high-resolution signal processing.
- Settings can be stored on a PC and reloaded at any time.
- Can be updated using the PowerBox USB Interface Adapter
- Robust aluminium case.

Specification:

- Operating voltage: 4,0V - 9,0V
- Current drain, iGyro: 51 mA
- Current drain, GPS: approx. 60 mA
- Maximum current: min. 10 A
- Receiver: Two, using serial inputs
- RC systems supported: DSM2 / DSMX, Futaba, HOTT, M-Link, Jeti
- Gyro sensor type: MEMS
- Number of sensor axes: 3.
- Gyro regulation modes: Heading mode, Normal mode
- Channels: 18
- Servo outputs: 5
- Servo signal resolution: 0.5 µs
- Servo frame rate: 18 ms
- Screen: Graphic OLED, 128 x 64 pixels
- Dimensions: 52 x 35 x 14 mm
- Weight incl. GPS sensor: 50 g
- Temperature range: -30°C to +75°C
- EMV approval: EN 55014-1:2006
- CE: 2004/108/EG

temporarily out of stock

Reviews

Quick Find

Shopping Cart

2 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 2m
1 x	Buy Perforated film 100 cm / 10 m
1 x	Carbon plate 1000x500x2,0 mm ECOTECH
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
2 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Buy Perforated film 100 cm / 50 m
2 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x	ARAMID honeycomb 1300x2600x2 mm
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	CA Glue fast 20g
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 20 m
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Cyanocrylate MD GA460 odourless 20g
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	80 mm rods set for direction control
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Round Rod 6,0x1000 mm
1 x	90 mm rods + T patellas set for direction control
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Propeller balancer
1 x	Allen wheel collar M4x6
1 x	ABS I Strip 20x10x1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	EasyFLY Addon
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	1/6 Pilot "Cindy"
1 x	Surface Indicator Gauge Small
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	20x200 mm battery rings
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Strip 3,5x1,75x330 mm
2 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Radial heatsink for MPJ AC25/35-xx motor
1 x	M3 black washers (4 pcs)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	28x5 mm wires output (2 pcs)
2 x	SERVO DES 588 BB MG
1 x
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	100 mm rods + T patellas set for direction control
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	120x60 mm SLH KOVO wheel
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	SE Ring 350 mm (2 pcs)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Canopy Latch
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	45 mm rods set for direction control
1 x	Round Rod 5,0x1000 mm
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Field folding model stand SebArt
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Clip mini fixing for wing (2 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
2 x	Swashplate metal LAMA
1 x	Tube Pitot to PIXHAWK
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Cable tie mounts 4.3 (4 uds)
1 x	1/6 Pilot "John"
1 x	PIX Hawk with accesories
1 x	Tape GFK 25 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	1/12 Pilot "Langley"
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	1/4 Pilot "Heidi"
2 x	1/7 Pilot "Japanese"
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Flat washer 4.3 mm (20 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	Flybar support metal LAMA
1 x	External LED's (2 pcs)
2 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
2 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
2 x	Cable set Premium™ MAXI "one4two"
2 x	Conector JR Servo female (50 pcs)
1 x	Smoke Oil Blue 5 l
1 x	Conector JR Servo male (50 pcs)
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Crimping tool
1 x	Charging Extension 50cm for 2 Battery
2 x	Conector JR Servo female (10 pcs)
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	1 m servo "Premium" wire (white/red/blue)
2 x	5 line servos wire black (1 m)
1 x	30 cm DEANS female connector
1 x	MPX-Dean "T" Adapter
1 x	Conector JR Servo male (10 pcs)
1 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
2 x	10m servo "Premium" wire (white/red/blue)
1 x	12V Car Adapter
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Extension for SensorSwitch 30cm
1 x	BlueCom™ Adapter (Android / WP)
1 x	PowerBox Smokepump
2 x	Extension MPX-MPX 20 cm
1 x	Adapter lead MPX/EC3
1 x	Styrene plate 320x120x1.0 mm
1 x	Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	DUPLEX 2.4EX MT 300 EX
1 x	Servo SAVOX SV-1254 MG HiVolt Low Profile
1 x	Savox Brushless Servo SB-2271SG
1 x	EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG
1 x	Blue aluminium servo arm V2-Hitec 2,0 inch M3
1 x	Blue aluminium servo arm V2-Hitec 1,25 inch M3
1 x	3,2 mm Prop Adapter M5
1 x	Blue aluminium servo arm V3-Hitec 1,0inch M3
1 x	Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x	2,3 mm Prop Drive Günther M4
1 x	2 mm Prop Adapter M5
1 x	20x1000 mm Ring Strap Back To Back
1 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x	Glass fabric 80 g/m² (silane, twill) 100 cm x 10m
1 x	Tape GFK 50 mm
1 x	Shaft sleeve LAMA
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Indoor Brushed motor kit
1 x	Landing gear axle Ø 4 mm (2 uds)
1 x	BlueCom™ Adapter (iOS)
1 x	PVC grid diagonal 290x185x0.32 mm
1 x	Panel Honeycom carbon 350x150x3.5mm
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Foil for sticking flaps and ailerons
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Crystal Universal RX 35.040 Ch 64
1 x	Field folding model stand
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS
1 x	Coversion set HIROBO EX/EAGLE elektro
1 x	Servo SAVOX SV-1270 TG
1 x	DUPLEX 2.4EX MULi 6s M
1 x	DUPLEX 2.4EX Expander E2
1 x	SAVOX SH 1290 MG servo digi
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	EXTRA 330SC-E 95" Orange/Blue/White
1 x	DUPLEX 2.4EX Central Box 220
1 x	Servo GO-1053MG 20 kg.cm 0.17s/60º
1 x	EXTRA 330SC-E 95" Orange/Blue/White
1 x	Battery RX JETI LiIon RB 3100 7.2v
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	DUPLEX 2.4EX MU 3 Sensor
1 x	Kit wheel loader 966G II without electrics, without hydrauli
1 x	Round Rod 3,0x1000 mm
1 x	Servo DITEX TD2612S
1 x	Round Rod 2,5x1000 mm
1 x	Glass fibre sleeve Ø 20 mm
1 x	Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m
1 x	Double aluminium servo arm V1-Futaba 2,5 inch M3 (red)
1 x	aluminium servo arm V1-JR 1,0 inch M2
1 x	Blue aluminium servo arm V2-Hitec 1,75" inch M3
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Angle of incidence meter
1 x	Landing gear axle Ø 5 mm (2 uds)
1 x	KOLIBRI 90 LV-I Esc
1 x	Carbon Non-Woven, 245 g/m² 125 cm x 20 m
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Glass fabric 25 g (2 m²)
1 x	1/6 Pilot "Garry"
1 x	1/4 Pilot "Mike"
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Esc KOSMIK 200+ HV
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Spikes Band (5 m)
1 x	8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White
1 x	Esc KOSMIK 200 HV
1 x	800TVL CMOS camera for FPV
1 x	Interface Realflight Simulator
2 x	Receiver RFA05 5Ch compatible FUTABA
1 x	DUPLEX 2.4EX MFlow2 Gas 800
2 x	Adapter lead MPX/XT60
1 x	Extension for LC-Display 50cm
1 x	OLED-Display for PowerBox Mercury SRS
1 x	30 cm MULTIPLEX female connector
1 x	Complete kit CAT 966G II WEDICO-construction-models
1 x
1 x	Receiver R6008HV-A comatible FUTABA
1 x	Receiver RSF08SB comatible FUTABA
1 x	Charger 220/110v
1 x	PowerBox SparkSwitch RS
1 x	PowerBox iGyro 1e
1 x	PowerBox iGyro SRS + GPS Modul
1 x	100m servo "Premium" wire (white/red/blue)

24,563.36EUR