186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x SE Ring 250 mm (2 pcs)
1 x SE Ring 360 mm (2 pcs)
2 x Servo RHINO pro SHV digi 4
2 x HITEC Power Supply 30A. Max. 540w
2 x Transmitter COCKPIT SX 12 M-Link (only Tx)
2 x Carbon fiber rod 2.5 mmx1000 mm
2 x SE Ring 450 mm (2 pcs)
1 x FUNRAY RR
1 x GPS V2 Sensor for M-LINK receivers
2 x HERON RR
2 x Carbon fiber rod 2.0 mmx1000 mm
1 x Arnes cruzado Confort de Luxe PROFI
1 x Magnetic Interruptor MULTIPLEX
2 x Carbon fiber rod 1.5 mm x 1000 mm
2 x Potenciometro micro
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Marker ties (20 pcs)
1 x Tape GFK 25 mm
2 x SE Ring 350 mm (2 pcs)
2 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Carbon fiber rod 14 mmx1000 mm
2 x COPILOT Multiplex
1 x FunCup XL RR
1 x SE Ring 240 mm (2 pcs)
1 x FunCub NG verde RR
1 x Motor PERMAX BL-O 3520-920 (Extra 330 SC)
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Adaptador equilibrador HITEC (XH)
2 x Alu servo arm double RHINO
1 x Spikes Band (5 m)
1 x Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro
1 x Tape GFK 50 mm
2 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Gold antispark 4 mm plug
2 x Connectors banna oro 2 mm (M/F) (ultralight)
2 x Connectors banna oro 8,0 mm (Male) 5 pcs.
3 x Connectors banna oro 3,5 mm (M/F)
1 x Banna gold connector 2,5 mm (M/F)
1 x Connectors banna oro 0,8 mm (M/F)
1 x Connector CAN 15
2 x Connectors banna oro 2 mm (M/F)
1 x XH female balance (4S) connector (2 pcs)
2 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Conector Servo female 4 pines
2 x Connectors banna oro 4 mm (M/F)
1 x Connectors banna gold 5,5 mm (M/F)
2 x Connectors banna oro 4 mm (M/F) (ultralight)
2 x XH female balance (2S) connector (2 pcs)
1 x Optotronix Aurora Plug
1 x XH male balance (2S) connector (2 pcs)
1 x 25 mm reinforced hinge
1 x ABS tube 5.0x3.0x1000 mm
2 x XH female balance (5S) connector (2 pcs)
1 x PIT (Aero-Naut)
1 x XT-90 connector (pair)
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x USB Charger 12V DC for car
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x XH male balance (5S) connector (2 pcs)
1 x Conector XT-30 (macho)
1 x 2 mm female connector (2 pcs) with safety connector
1 x Conector FUTABA Servo female BLUE silicon (10 pcs)
2 x Connectors banna oro 3 mm (M/F)
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 300 mm (2 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x SE Ring 480 mm (2 pcs)
1 x Wing conexion 2 servos Futaba 50 cm
1 x Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x SlowFlyer control horn (3 pcs)
1 x Small adjustable aluminium control horn with bearing 2,8x15
1 x Rudder forward 70x28 "type Kato"
1 x Retract undercarriage for gliders up to 3,5 Kg
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x Retract undercarriage for gliders up to 2 Kg
1 x Allen wheel collar M4x4
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Allen wheel collar M3x3
1 x Socket head long ball link M3 (6 uds)
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Tow hook for tug
2 x Gold antispark 5,5 mm plug
1 x Connectors MPX black male
1 x Soldering PCBs 8pin, 5 pieces
1 x 30 cm DEANS female connector
1 x Connectors MPX black female
1 x Conector BEC male (10 pcs)
1 x Conector JR Servo female (10 pcs)
1 x PARKMASTER PRO Kit + (RR)
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Kontronik connector (10 connectors, 5 pairs)
1 x 20x200 mm battery rings
1 x Bird (Aero-naut)
1 x Cinta Goldfix 1m
1 x Tape GFK 38 mm
1 x Red 4 mm connector holder
1 x MPX Support
1 x Multiplex True Air Speed + Vario Sensor to M-LINK
1 x Connectors DEANS 4 pins (1 pair)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Wingstabi 9 DR M-Link Receiver
1 x Conector JR Servo male (10 pcs)
1 x MR30 connector male
1 x Conector XT-30 (hembra)
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Propeller POWER-PROP 7x7
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Contacto macho pin conector (10 pcs)
1 x MPX Sub-D Adaptor
1 x PIX Hawk with accesories
1 x Silicone red 0,75 qmm wire ( 1 m)
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x RH long aluminium horn (2pcs)
1 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x Adapter lead MPX/XT60
1 x Conector JR Servo female (50 pcs)
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x 5 line servos wire black (1 m)
1 x 200m servo "Premium" wire (white/red/blue)
1 x Crimping tool
1 x Conector JR Servo male (50 pcs)
1 x 10m servo "Premium" wire (white/red/blue)
1 x MPX-Dean "T" Adapter
1 x Cable set Premium™ MAXI "one4two"
1 x 100m servo "Premium" wire (white/red/blue)
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x Conector JR Servo male (10 pcs)
1 x Conector JR Servo female (10 pcs)
1 x 50m servo "Premium" wire (white/red/blue)
1 x 30 cm MULTIPLEX female connector
1 x Extension for SensorSwitch 30cm
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Dean "T" - Futaba Adapter
1 x Smoke Oil Blue 5 l
1 x Adapter lead MPX/EC3
1 x Extension MPX-MPX 20 cm
1 x OLED-Display for PowerBox Mercury SRS
1 x BlueCom™ Adapter (Android / WP)
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
8,395.51EUR
Manufacturers
Languages
Español English
Currencies