Top » Catalog » PowerBox Systems » POWER1010/10000

251.91EUR

Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
[POWER1010/10000]

Product description
The Premium™ MAXI servo cable is the thicker variant of the familiar Premium™ cable with a conductor cross-section of 0.35mm². In this case ‘thicker’ means that the current-bearing positive and negative conductors have a cross-sectional area of 0.5mm², while the signal conductor’s cross-section is 0.3mm² in order to save weight. This makes the Premium™ Plus cable ideal for installations where relatively long leads have to be deployed in the wing or fuselage for high-performance servos.
This insulation produces a weight reduction of about 30% compared with the conventional PVC.
For comparison: in spite of its larger cross-section, the 0.5 mm² Premium MAXI cable offered here is lighter than standard 0.25 mm² PVC cable.
The insulation is fire resistant, and its heat resistance is much higher than the usual PVC.
PowerBox Premium MAXI cable is available loose or in bundles. If you need different lengths, please contact us for a quote.

Características
2x 0.5mm² cross section (red and blue)
1x 0.3mm² cross section (white)
30% weight saving
only 14g/m
fire resistant
robust isolation
employed in full-size aviation

under request

Reviews

Quick Find

Shopping Cart

1 x	PPM Encoder Module
1 x	Tube Pitot to PIXHAWK
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
2 x	BALSA trip 8.0x8.0x1000 mm
2 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
2 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
3 x	OBECHI sheet 2.0x3.0x1000 mm
3 x	BALSA trip 2.0x10.0x1000 mm
2 x	Liston HAYA 10 x 10 x 1000 mm
2 x	BALSA trip 10x10x1000 mm
4 x	Beech dowels 2.0 x 1000 mm
2 x	BALSA triangular 10x10x1000 mm
1 x	BALSA triangular 8x8x1000 mm
3 x	BALSA triangular 6x6x1000 mm
2 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
2 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Cockpit plastic closing
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	One touch canopy lock
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	SUS wire 3m (nylon coated)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Locking cable tie 4.6x203 (uds)
1 x	TrainerCord (master-learner)
1 x	Round Rod 6,0x1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	10 mm Prop Adapter M12
1 x	3.2 mm Prop Adapter M8
1 x	3 mm Prop Adapter M6
1 x	Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	A/C economy plywood 600x300x6+.0 mm
2 x	BALSA leading edge 8x10x1000 mm
2 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
3 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Balsa panel 4.0x100x1000 mm
2 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
2 x	Balsa panel 2.5x100x1000 mm
1 x	Birch plywood plate 600x300x1.5 mm
2 x	Beech dowels 4.0 x 1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Balsa panel 1.5x100x1000 mm
3 x	Balsa panel 1.0x100x1000 mm
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
2 x	Pine wood slat 10x10x1000 mm
2 x	BALSA trip 3.0x5.0x1000 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	38x4,5 mm wires output (2 pcs)
1 x	Split M1,2x10 (10 pcs)
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	Allen wheel collar M3x5
1 x	Snap long M2 (10 uds)
1 x	Clip mini fixing for wing (2 pcs)
2 x	100 mm rods + T patellas set for direction control
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	Allen wheel collar M4x4
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	45 mm rods set for direction control
1 x	140 mm rods + T patellas set for direction control
1 x	Oracover Azul 2 m
1 x	Oracover Black 2 m
1 x	Oracover Black 10 m
1 x	Oracover Brown 2 m
1 x	Extension silicon 30 cm male (Graupner)
1 x	Cabel "Y" 15 cm
1 x	Premium servo extension 100cm
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension 7.5 cm
1 x	Axle for AXI 5325/xx motors
1 x	Axle for AXI 4120/xx motors
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	Cockpit latch closing I=10 mm
1 x	Allen wheel collar M3x3
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Snap pin for micro clevis (10 uds)
1 x	Clip fixing for wing (2 pcs)
1 x	Lead with adhesive (2 pcs)
1 x	28x5 mm wires output (2 pcs)
1 x	Control for forward wheel (MINI)
1 x	100 mm rods set for direction control
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	ORACOVER Fluor red (2 m)
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	6,4x1000 mm 2:1 red termoretract tube
1 x	PARAGON Trainer 46-55 1580 mm
1 x	SCANNER 46-55 Sport Scale 1:7 ARF
1 x	BULLIT Wing 1095 mm
1 x	Extension silicon 75 cm (Futaba)
1 x	Extension silicon 10 cm (Futaba)
1 x	BULLIT Wing 840 mm
2 x	BALSA trip 5.0x5.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Extension silicon 30 cm female (Futaba)
1 x	Extension silicon 50 cm (Graupner)
1 x	CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
1 x	BOOMERANG II 40/46 ARF 1.55mm
1 x	DOMINO 46-55 Trainer 1583 mm
1 x	TRAINER RC Pilot V2 90" w/r ARF
1 x	SkyMaxx 1.550 mm (kit)
1 x	Cessna SKYLANE T182 1.75m - Seagull Model
1 x	PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x	SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models)
1 x	PC-6 Pilatus Porter Big "Tiger" (PICHLER)
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds)
1 x	BALSA triangular 15x15x1000 mm
1 x	Actuator Electric 25 mm HIGH TORQUE
1 x	ER-40eVo Set A [2x ER40 + RB-45]
1 x	ER-40eVo Set B [Complet Set + GS200]
1 x	Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts)
1 x	Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re
1 x	20-25mm Servo Arm
1 x	Digital weight, angle and balance meter BASIC

11,947.58EUR