186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Extractor piñones 2.3/3.2 mm
1 x Vasa model Catapult
1 x Xplorer3 anemometro
1 x Socket head ball link M3 (2 uds)
1 x M2,5 5Diam short black ball link V2 (2 pcs)
2 x M2,5 Diam metal ball link V3 (2 pcs)
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x M3 Maxi ball link (2 uds)
1 x Socket head long ball link M3 (6 uds)
1 x Socket head long ball link M3 (2 uds)
2 x Joint with bearing M2 22x5,5
2 x Long ball link M1.6 (6 uds)
1 x Ball link M3 RPA's-UAV's
2 x M2 5Diam short black ball link V2 (2 pcs)
1 x Socket head ball link M3 (2 uds)
1 x Ball link M3 (10 pcs, flat ball)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x M3 Maxi ball link (2 uds)
1 x Ball link M3 (10 pcs)
2 x M2 5Diam black ball link V2 (2 pcs)
2 x Liston HAYA 3 x 10 x 1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
2 x BALSA triangular 15x15x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x WingFix ULTRA Black Edition
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Truck-trailer for gliders 720 x 239 mm
2 x Surface Indicator Gauge Small
1 x Pine wood slat 6.0x6.0x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Angle of incidence meter
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Medidor ángulos y/o incidencias
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Propeller balancer
1 x BALSA triangular 6x6x1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Propeller balancer
1 x Beech dowels 3.0 x 1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
2 x Field folding model stand SebArt
1 x Pine wood slat 3.0x5.0x1000 mm
2 x BALSA trip 6.0x6.0x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Flat washer 1.7 mm (20 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
2 x M3 black washers (4 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Lock washer 2.2 mm (20 pcs)
1 x Lock washer 2.7 mm (20 pcs)
1 x Flat washer 4.3 mm (20 pcs)
2 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Flat washer 3.2 mm (20 pcs)
1 x Quicklock washer 2.5 mm (10 pcs)
1 x Quicklock washer 2 mm (10 pcs)
1 x Flat washer 2.7 mm (20 uds)pcs)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Extension 90 cm (Futaba)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x 1/6 Pilot "John"
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Rocket D3-P
1 x Rocket D9-7
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Pan Head Screw M1,6x8 (10 pcs)
1 x Socket Screw M3x9 mm
1 x Socket Head Screw M2x10
1 x LED lighting system High Power
1 x Jet Afterburner Simulator NF-Jet3 RY
1 x Jet Afterburner Simulator NF-Jet4 RY
1 x Jet Afterburner Simulator NF-Jet1RY Set
1 x Long ball link M2 (6 uds)
1 x 6 mm ball link M3 (10 pcs)
1 x Joint with bearing M3 22x5,5
1 x Reflector 18 mm (2 pcs)
1 x LED blink wire flashing (orange - 2pcs)
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x M3 INDUSTRIAL ball link (2 uds)
1 x LightBox SR
1 x Blue metalic ball link M2/2 azul (2 pcs)
1 x LED wire (white - 2pcs)
1 x LED blink wire flashing (white - 2pcs)
1 x Balsa panel 8.0x100x1000 mm
1 x Light System
1 x BALSA triangular 10x10x1000 mm
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Spring pin Ø 2 x 6 mm (10 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x Screw M3x5 (10 pcs)
1 x Screw KB 1.4x6 mm (10 pcs)
1 x Lock nut M2 (10 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x Treaded hexagonal socket insert M4 Br (4 pcs)
1 x Anodized aluminium servo M3x16 screw (4 red pcs)
1 x Socket Head Screw M2x12
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Servo M2x7/16 screw (4 pcs)
1 x 
1 x Starter 12v (Max 90 and 15ccm)
1 x Conector JR Servo female (50 pcs)
1 x Cable set Premium™ MAXI "one4two"
1 x Dean "T" - Futaba Adapter
1 x BlueCom™ Adapter (Android / WP)
1 x Conector JR Servo male (50 pcs)
1 x 5 line servos wire black (1 m)
1 x Charging Extension 50cm for 2 Battery
1 x Starter 12v (Max 180 and 30ccm)
1 x Screwdriver for Torx® TX8
1 x Vacuum pump 12 CFM
1 x 2,0x50 mm allen screwdriver
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Cut tube
1 x External LED's (2 pcs)
1 x 30 cm MULTIPLEX female connector
1 x Charger 220/110v
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x Extension MPX-MPX 20 cm
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Adapter lead MPX/EC3
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x 12V Car Adapter
1 x 200m servo "Premium" wire (white/red/blue)
1 x OLED-Display for PowerBox Mercury SRS
4,069.09EUR
Manufacturers
Languages
Español English
Currencies