Inicio » Catálogo » PowerBox Systems » POWER8015

186.00EUR

Bomba de humo JETs PowerBox 2 salidas
[POWER8015]

Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

3 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 100 m
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 20m
1 x	Film perforado 145 cm / 50 m
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
1 x	Plancha ABS 500 x 400 x 0,5 mm (blanca)
1 x	Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Film perforado 100 cm / 10 m
1 x	ARAMID panel nido de abeja 1300x2600x2 mm
1 x	Plancha ABS 500 x 400 x 2,0 mm (blanco)
1 x	Plancha aluminio 500x250x0.5 mm
1 x	Fibra carbono "MANGA" 12k 170 mm x 5 m
2 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Fibra carbono TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Hoja de sandwich de fibra de carbono 350x150x3 mm
1 x	Plancha ABS 500 x 400 x 1 mm (blanco)
1 x	Plancha ABS 500 x 400 x 1,5 mm (blanco)
1 x	Film perforado 100 cm / 50 m
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 50m
1 x	Vela OXY 0,5 pulgadas2
1 x	Vela OXY 5.0 m2
1 x	Equilibrador hélices
1 x	Medidor ángulos
1 x	Paracaídas PV6 para F3J
1 x	Paramotor Trike XL
1 x	Medidor angulos tamaño pequeño
1 x	Para-RC Trike "RC-Bullix"
1 x	Paracaídas P4
1 x	Motorización Trike XL (motor+regulador+helice)
1 x	Soporte para aviones SebArt
2 x	Varilla acero Ø 2,0 mm x 1000 mm
1 x	Varilla acero Ø 0,8 mm x 1000 mm
1 x	Varilla acero Ø 1,5 mm x 1500 mm
3 x	Varilla acero roscada M3 -1m
1 x	Varilla acero Ø 4,0 mm x 1000 mm
1 x	Varilla Aluminio Ø 4,0 mm x 3000 mm
1 x	Varilla latón Ø 0,5 mm x 1000 mm
1 x	Varilla acero Ø 7,0 mm x 1000 mm
1 x	Varilla latón Ø 1,5 mm x 1000 mm
2 x	Varilla latón hexagonal Ø 3 mm x 1000 mm
2 x	Varilla acero Ø 2,5 mm x 1000 mm
2 x	Varilla acero Ø 14,0 mm x 1000 mm
1 x	Varilla latón Ø 1,0 mm x 1000 mm
1 x	Varilla acero Ø 5,0 mm x 1000 mm
2 x	Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x	Varilla acero Ø 4,5 mm x 1000 mm
1 x	Varilla acero Ø 1,5 mm x 1000 mm
1 x	Varilla acero Ø 6,0 mm x 1000 mm
1 x	Tubo ABS 5,0x4,0x1000 mm
1 x	Peel Ply liso 95 g/m2 100 mm x 100 m
1 x	Tubo acero (L 1000 mm, Ø9 mm, Ø8,7 mm)
1 x	Arandela conica alumino M4 azul (8 pcs)
1 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	Prolongador 90 cm (Futaba)
2 x	Enganche de las palas del rotor
1 x	Tuerca para asegurar tornillos M2
1 x	Motor simulado Cierva C30
1 x	Palanca de dirección
1 x	Tuerca M1,6
1 x	Bolas 4mm
2 x	Timón lateral
1 x	Prolong/Adap correa Futaba T-10CG
2 x	Tuerca M2
1 x	Bahía de la batería
1 x	DUPLEX 2.4EX Central Box 210
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	DUPLEX 2.4EX Central Box 220
1 x	Bisagra larga con pin metalico (12 uds)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Bisagra de compuerta negra 30x16 mm (2 pcs)
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
1 x	Bisagra de nylon flaps 33x9 (2 pcs)
1 x	Bisagra cilíndrica 67 mm Ø 4,5 mm (5 pcs)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Bisagra papel lite CA (12 uds)
1 x	Acoplador M2,5 Ø 2 mm (10 pcs)
1 x	Gorra Jeti Negra
1 x	Sistema doble de alimentación RX
1 x	PowerBox PIONEER incl. microSwitch
1 x	Centralita de control OPTOTRONIX Aurora-LCU
1 x	Battlife Guard 2s
1 x	Varilla latón Ø 0,8 mm x 1000 mm
1 x	PowerBox Cockpit SRS (incl. SensorSwitch)
1 x	Varilla acero roscada M2 - 1m
1 x	PowerBox PowerExpander SRS
1 x	Prolong/Adap correa Futaba 12-14C
1 x	Capuchón M interruptor aluminio rojo
1 x	Fibra carbono tela 160g/m2 127 cm x 10 m
1 x	Cargador HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x	Bisagra de nylon 20x15x0,3 (10 pcs)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Acoplador M3 (10 uds)
1 x	Sensor digital Air Speed con Pitot
1 x	Tornillos M3x16
1 x	Servo Fork
1 x	Arandelas 2.2×4
1 x	Tubo de cola
1 x	Bearing housing
1 x	Arandela de la rueda
1 x	Timón
1 x	Núcleo del buje del rotor
1 x	Parallamas
1 x	Soporte cental de las palas del rotor
1 x	Set bisagras indoor con horns integrados
1 x	Bisagra Redonda flexible (12 uds)
1 x	Bateria arranque incl. compresor inflado
2 x	Disipador radial para motores MPJ AC 25/25-xx
1 x	Actro 32-3 Heli MAX 5mm
1 x	Combustible Glow "KAVAN" air/heli 5% nitro
1 x	Combustible Glow 4T "KAVAN" air/heli 15% nitro
1 x	Conector alas EWC6 40 cm
1 x	DPSI OCP Overload protection
1 x	Guías externas para antena de 2,4 GHz negras (2 pcs)
1 x	Cable servo PREMIUM 200m (blanco/rojo/azul)
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	Set Radial para Hacker A30-S
1 x	Ciano KAVAN Thick 20g
1 x	Disipador radial para motores MPJ AC 25/35-xx
1 x	Bidule 170 ARF 3.48 m
1 x	Piloto MAX ARTF
1 x	Tapa de servo estándar 90x60 mm
1 x	Bisagra pin 39x20 mm (10 uds)
1 x	Chaleco Hispano Aviación
1 x	Chaqueta Hispano Aviación
1 x	Gorra Hispano Aviación
1 x	Polo Hispano Aviación
1 x	Adaptador 4,0 mm M6 para cono 30 mm hélice pleg.
1 x	Adaptador 3,0 mm M6 para cono 30 mm hélice pleg.
1 x	Biberon 500 ccm Glow
1 x	Foco combo blanco/rojo
1 x	Aceite Humo Blue 5 l
1 x	Activador CA 150 ml
1 x	Disipador para motor Hacker B 20 (o motores hasta Ø20 mm)
1 x	Conector alas EWC3 100 cm

9,731.21EUR