186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
2 x Brass rod Ø 0.8 mm x 1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x 40,0 mm hydro-propeller (left hydropropeller)
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Bearing block for noseleg landing gear
1 x 40 mm 1/4" Race propeller (rigth hydropropeller)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x SCHARNHORST accessories
1 x 42,0 mm propeller (left propeller)
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Digital precision scale up to 2000 g
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x Aluminium servo arm (2 uds)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x SCHARNHORST Battleship 1:200
1 x 15x7 tree blades propeller
1 x 3.2 mm Prop Adapter M6
1 x 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x 14 mm portholes (10 pcs)
1 x 3 mm Prop Adapter M6
1 x 3.2 mm Prop Adapter M8
1 x GM Propellers Folding propeller Scale 20x13 Carbon 1 pair
1 x 2,3 mm Prop Adapter M6
2 x 2 mm Prop Adapter M6
1 x 28 mm turnbuckle
1 x 2,3 mm Prop Adapter M6
1 x 12x6 tree blades propeller
1 x 10x7 tree blades propeller
1 x "L" servo arm 65x49 mm (2 pcs)
1 x 290 mm 8x4 M4 shaft ship
2 x 11x7 tree blades propeller
1 x 29,0 mm propeller (left propeller)
1 x 2.3 mm Adapter for 30 mm spinners
2 x 12 mm portholes (10 pcs)
1 x 12 mm mast holder
1 x Propeller electric carbon 6x5
1 x Propeller POWER-PROP 13x9
1 x Foam air filter Ø 48 mm, blue
1 x Xoar Electric Beechwood Prop 12x6
1 x Propeller electric carbon 10.5x8
1 x Propeller POWER-PROP 14x10
1 x Propeller electric carbon 10.5x7
1 x Propeller POWER-PROP 14x8
1 x Propeller electric carbon 10x8
1 x Propeller POWER-PROP 11x8
1 x Propeller electric carbon 8.5x5
1 x Propeller POWER-PROP 14x12
1 x Dumper propeller 6/8 mm
1 x Propeller POWER-PROP 13x10
1 x Propeller electric carbon 7x7
1 x Propeller POWER-PROP 10x7 Izda
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Male connector for 16 pines AWG
1 x Fod Guard 94x34 mm
1 x Charger ISDT 608AC 200W
1 x Cockpit aluminium closing 5.4g
1 x Fod Guard 83x32 mm
1 x Cockpit aluminium closing
1 x Female connector for 16 pines AWG
1 x Male connector for 10 pines AWG
1 x Tape GFK 50 mm
1 x Fod Guard 73x32 mm
1 x Combo RAY C3542-1000 + ESC 60A
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Connectors banna oro 4 mm (M/F)
1 x 
1 x Male connector for 6 pines AWG
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Cockpit aluminium closing 4.7g
1 x Connectors banna oro 2 mm (M/F)
1 x Female connector for 6 pines AWG
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Charger SKY RC D200 neo
1 x Fod Guard 94x32 mm
1 x Connectors banna oro 0,8 mm (M/F)
1 x Partall paste 650 g
1 x Male connector for 12 pines AWG
1 x Connectors banna oro 3,5 mm (M/F)
1 x Cargador para AA/AAA Ni-MH & Ni-Cd
1 x Carburador SAITO FA-120 4S glow
1 x 95 mm aluminium spinner.
1 x 60 mm aluminium spinner (Kavan)
1 x HITEC 17 mm servo arm with ball link HITEC
1 x Futaba 30 mm servo rounded arm
1 x 46 mm Futaba servo arm tandem with ball link
1 x Futaba 14/20 mm servo pull-pull double arm with ball link
1 x Futaba 50/60 mm servo pull-pull double arm with ball link
1 x DUPLEX 2.4EX Satellite receiver Rsat 2
1 x DUPLEX R12 EPC receiver 2,4GHz
1 x DUPLEX R12 receiver REX Assist
1 x DUPLEX R10 receiver 2,4GHz
1 x 82 mm aluminium spinner.
1 x 64 mm aluminium spinner
1 x 70 mm aluminium spinner.
1 x Hitec 30 mm servo rounded arm
1 x Hitec 46 mm servo arm with ball link
1 x Futaba 52 mm servo arm
1 x Futaba 25 mm servo arm with ball link
1 x Futaba 46 mm servo arm with ball link
1 x Futaba 24/30 mm servo pull-pull double arm with ball link
1 x Futaba 20 mm servo arm
1 x 14 mm Portholes for screws (10 pcs)
1 x 4 mm Prop Adapter M8
1 x 4 mm Prop Adapter M8
1 x Aero-Master Fuselage (Aero-naut)
1 x 57 mm aluminium spinner.
1 x 45 mm aluminium spinner (Kavan)
1 x 45 mm aluminium spinner.
1 x 89 mm aluminium spinner.
1 x Futaba 25 mm servo arm with M3 ball link
1 x Futaba 2x20 mm servo double arm
1 x HITEC 20 mm servo arm with ball link
1 x Futaba 38 mm servo arm with ball link
1 x Hitec 20 mm servo arm
1 x Vertical mounting servo holder
1 x Hitec 52 mm servo arm
1 x Gates hinge
1 x FUTABA 20 mm servo arm with ball link
1 x Hitec 25 mm servo arm with M3 ball link
1 x XTorque CFK Servohebel 38
1 x Futaba 54 mm servo arm with ball link
1 x Adapter rotula M3
1 x 54 mm Futaba servo arm tandem with ball link
1 x 17 mm servo arm with ball link DES Graupner
1 x 6 mm ball link M3 (10 pcs)
1 x Adapter lead MPX/EC3
2,903.51EUR
Manufacturers
Languages
Español English
Currencies