Top » Catalog » PowerBox Systems » POWER1010/1000

26.00EUR

Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
[POWER1010/1000]

Product description
The Premium™ MAXI servo cable is the thicker variant of the familiar Premium™ cable with a conductor cross-section of 0.35mm². In this case ‘thicker’ means that the current-bearing positive and negative conductors have a cross-sectional area of 0.5mm², while the signal conductor’s cross-section is 0.3mm² in order to save weight. This makes the Premium™ Plus cable ideal for installations where relatively long leads have to be deployed in the wing or fuselage for high-performance servos.
This insulation produces a weight reduction of about 30% compared with the conventional PVC.
For comparison: in spite of its larger cross-section, the 0.5 mm² Premium MAXI cable offered here is lighter than standard 0.25 mm² PVC cable.
The insulation is fire resistant, and its heat resistance is much higher than the usual PVC.
PowerBox Premium MAXI cable is available loose or in bundles. If you need different lengths, please contact us for a quote.

Características
2x 0.5mm² cross section (red and blue)
1x 0.3mm² cross section (white)
30% weight saving
only 14g/m
fire resistant
robust isolation
employed in full-size aviation

few units

Reviews

Quick Find

Shopping Cart

1 x	Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
2 x	resin-hardener package L-385 with hardener H-385 (875 g)
1 x	Hardener Aero EPH 161 (250 g)
2 x	Epoxy Resin L (2.5 Kg)
2 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	MEKP Harderner 100 g
1 x	resin-hardener L-385 H-385 (1250 g)
2 x	resin-hardener L-385 H-385 (625 g)
2 x	White gelcoat 1 Kg
1 x	resin-hardener package L-385 with hardener H-385 (3.5 Kg)
2 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
2 x	Steering arm 16 mm Ø 4 mm
2 x	Covered closure or fairings
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x	UHU hart 35 g
3 x	Steering arm 12 mm Ø 3 mm (2 uds)
2 x	Cockpit plastic closing
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
2 x	Steering arm 12 mm Ø 4 mm
2 x	Heat-conducting adhesive (2x2ml), WLK DK 4
2 x	Canopy Latch
1 x	Pegamento Pu R 50g polyuretano
2 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Hardener Aero EPH 161 (500 g)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
3 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	resin-hardener L-385 H-385 (5000 g)
3 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Locking cable tie 4.6x203 (uds)
2 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
2 x	Stainless steel cable Ø 0.5 mm (20 m)
2 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
3 x	Crimping sleeves for cable 0.85 mm (10 pcs)
3 x	Big Crow DLE-170M
1 x	Motor DLE 170 M- Paramotors
1 x	Motor DLE 200cc Premium Muffler
2 x	Small Crow DLE-170M
1 x	Silent-blocks DLE 170M
1 x	Motor DLE 200cc Std
1 x	Dean-T Plug Mold
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Split pin 1.6x16 mm (10 uds)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
2 x	Crimping sleeves for cable 0.70 mm (10 pcs)
2 x	Window mounting channel 5m
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	Combo lighting module with covering drop shape
3 x	Locking cable tie 2.5x100 (uds)
2 x	Split M1,2x10 (10 pcs)
1 x	Snap long M2 (10 uds)
1 x	Pushrod greyline 4/3 with coupler M3
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
2 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	UHU Por 50ml/40g
2 x	120x60 mm SLH KOVO wheel
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	SkyMaxx 1.550 mm (kit)
1 x	Motor DLE 430 cc - Paramotors
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	100m servo "Premium" wire (white/red/blue)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	White silicone 0,25 qmm wire (150 m)
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	50m servo "Premium" wire (white/red/blue)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	White silicone 0,25 mm² wire (25 m)
2 x	White silicone 0,25 qmm wire (100 m)
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	5 line servos wire black (1 m)
1 x	200m servo "Premium" wire (white/red/blue)
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	Epoxy MID-CURE™ 15 min (130g)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x	LED lighting system High Power
1 x	LED blink wire flashing (orange - 2pcs)
1 x	Pushrod greyline 3/2 with coupler M2
1 x	LUCAS pilot ARTF
1 x	Epoxy QUIK-CURE™ 5 min (130g)
1 x	Catalyst INSTA - SET™ (60g)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x	Screw-lock connector M2 (2 uds)
1 x	Cockpit aluminium closing 5.4g
1 x	Thread locker IC-Loc™ blue "medium" 10 ml
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x	250 mm / 16 mm Airbrakes
1 x	140 mm rods + T patellas set for direction control
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x	Cyano ULTRA - CURE™ (21g)
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	Extension for SensorSwitch 30cm
1 x	Spinner INO 82 mm Chrome (Imitacion metal)
1 x	Reductora IPS 150 DX2BB-BXCS 7:1
1 x	Spinner INO 70 mm Chrome (Imitacion metal)
1 x	Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt
1 x	30 cm BEC cable (female)
1 x	Spannlack 1000 ml
2 x	Partall paste 650 g
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	1000 ml sealer (DOPE)
1 x	Nitroverdu 500 ml
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Jet Afterburner Simulator NF-Jet4 RY
1 x	Cockpit aluminium closing 4.7g
1 x	Cierre cabina aluminio Ø4, I=10 mm
2 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	SUS wire 3m (nylon coated)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Cable tie mounts 4.3 (4 uds)
1 x	Allen wheel collar M3x3
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	CNC FPV Display screen&Transmitter Holder Vertical
1 x	45 mm white plastic spinner for fixed propeller
1 x	Landing gear frontal support 29x26x13,5
1 x	Spinner plastic red fixed propeller 30 mm
1 x	Lead with adhesive (2 pcs)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	5.8G Receiver Helical Antenna with protecting case (SMA plug) 12
1 x	40 mm white plastic spinner for fixed propeller
1 x	Spinner INO 57 mm Chrome (Imitacion metal)

19,712.97EUR