Inicio » Catálogo » PowerBox Systems » POWER1010/5000

126.00EUR

Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
[POWER1010/5000]

Product description
The Premium™ MAXI servo cable is the thicker variant of the familiar Premium™ cable with a conductor cross-section of 0.35mm². In this case ‘thicker’ means that the current-bearing positive and negative conductors have a cross-sectional area of 0.5mm², while the signal conductor’s cross-section is 0.3mm² in order to save weight. This makes the Premium™ Plus cable ideal for installations where relatively long leads have to be deployed in the wing or fuselage for high-performance servos.
This insulation produces a weight reduction of about 30% compared with the conventional PVC.
For comparison: in spite of its larger cross-section, the 0.5 mm² Premium MAXI cable offered here is lighter than standard 0.25 mm² PVC cable.
The insulation is fire resistant, and its heat resistance is much higher than the usual PVC.
PowerBox Premium MAXI cable is available loose or in bundles. If you need different lengths, please contact us for a quote.

Características
2x 0.5mm² cross section (red and blue)
1x 0.3mm² cross section (white)
30% weight saving
only 14g/m
fire resistant
robust isolation
employed in full-size aviation

temporalmente fuera de stock

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Eje barco de 290 mm M5x18 mm
1 x	Eje barco 290 mm 4/4 mm
1 x	Tuerca autoempotrable M6 (4 pcs)
1 x	Perfil Acero Inox. 10.5x5.7x1000 mm
1 x	Arandela conica ancha alumino M4 Oro (4 pcs)
1 x	Adaptador 2 LiPos XH>EH
1 x	Modulo PPM Encoder
1 x	Círculo autoadhesivo 10 mm (72 pcs)
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Cartucho de humo Verde 100 g
1 x	Círculo autoadhesivo 15 mm (30 pcs)
1 x	Cono plástico blanco hélice fija 50 mm diámetro
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Ball link latón BS M3 V1 (10 pcs)
1 x	Listón de HAYA redondo 3,0 x 1000 mm
1 x	Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x	Bisagra cilíndrica 4,5 Ø x 12 x 67 mm (10 pcs)
1 x	Bisagra pin 26x11 mm (10 uds)
1 x	Bayoneta de carbono 13,4 mm Ø 0,48 mm
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 20m
1 x	Prolongador cable servo 0,14 PVC, conector ZH micro
1 x	Varilla carbono 16 mm x 1000 mm
1 x	Extension silicona 30 cm macho (Graupner)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Equilibrador hélices
1 x	Bisagra de Flaps (6 uds)
1 x	Conector JAPAN G2 Set 5 pares
1 x	Film perforado 100 cm / 50 m
1 x	Varilla carbono 0.5 mmx1000 mm
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Equilibrador hélices
1 x	Varilla carbono 0.8 mmx1000 mm
1 x	Varilla carbono plana 1000x3.0x0.5 mm
1 x	Carro remolque para veleros 720 x 285 mm
1 x	Plancha ABS 500 x 400 x 1,5 mm (blanco)
1 x	Prolongador 7.5 cm
1 x	Varilla carbono 7.0 mmx1000 mm
1 x	Tubo carbono (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Bayoneta aluminio ø30×1 mm x 1m
1 x	Piloto 1/6 "Tony"
1 x	Interface Jack Adapter IKARUS
1 x	Horn de mando 6/27 con rótula M3
1 x	Conexion PREMIUM fuselaje/alas para dos servos MPX 120/40 cm
1 x	Rótula con rodamiento M3 22x5,5
1 x	Piloto civil "Curt" tamaño 9cm (Slimline)
1 x	Cable servo 5 lineas negro (1m)
1 x	Funda anticalorica de fibra de vidrio Ø 6 mm 1000 mm
1 x	Soporte para cables S 6 mm (10 pcs)
1 x	Horn DUBRO 1/2A
1 x	Rótula con bola M3 (10 pcs)
1 x	Plasti Dip Liquid Tape 429 ml rojo
1 x	Piloto 1/12 "Tom"
1 x	Piloto militar "Fly Boy" tamaño 9cm (Slimline)
1 x	Rótula V1 corta M2/M1,6 3Diam negra (2 pcs)
1 x	Bird (Aero-naut)
1 x	Motor A50-14L Turnado V3 Glider
1 x	AXI 2814/16 V2
1 x	AXI 2820/12 V2 Eje largo
1 x	Adaptador para montar reductora VMKG en motor 480
1 x	AXI 2820/10 V2 Eje largo
1 x	Eje para motor Hacker A30-XL V2
1 x	Disipador para motor Hacker B 20 (o motores hasta Ø20 mm)
1 x	AXI 2808/24 V2
1 x	Eje para motor Hacker A60 L (140 mm)
1 x	Actro 32-3 Heli MAX 5mm
1 x	AXI 2814/6D V2
1 x	Eje para motor Hacker A60-20/22/24S (120 mm)
1 x	Motor A50-12 L V4
1 x	Motor A30-12 L V4
1 x	Camara USB micro endoscopica
1 x	Eje para motor Hacker A20-S (3 uds)
1 x	AXI 4120/14 V2
1 x	Motor Advance 50-6
1 x	Eje para motor Hacker A60-XS-V2 (112,5 mm)
1 x	AXI 2820/12 V2
1 x	Motor Advance 30-10 F3A
1 x	AXI 2808/16 V2 Eje largo
1 x	AXI 2820/10 V2
1 x	AXI 2217/12 V2
1 x	Motor A20-26 M EVO
1 x	Motor A200-6
1 x	AXI 2814/20 V2
1 x	AXI 2808/20 V2
1 x	Motor A50-16 S V4
1 x	Soporte Motor 400 "M"
1 x	AXI 2814/16 V2 Eje largo
1 x	AXI 2820/8 V2
1 x	Eje para motor Hacker A60 L V4
1 x	Placa de montaje Ø 38 mm para motores eléctricos
1 x	Disipador radial para motores MPJ AC 25/35-xx
1 x	Soporte Motor AC 28/7
1 x	Radial mount for electric 2.5-5.6
1 x	Motor A10-7 L 4,4:1
1 x	Set Radial para Hacker A30-S
1 x	Motor Mega AC 16/15/03
1 x	MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless
1 x	Varilla carbono 0.5 mmx1000 mm
1 x	Varilla carbono 12 mm x 1000 mm
1 x	Cono autoventilado hélice plegable 40 mm diámetro / eje 3,0 mm
1 x	Bisagra larga con pin metalico (6 uds)
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm kit (2 pcs)
1 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x	Plancha fibra vidrio 350x150x3.0 mm
1 x	Bisagra papel CA (12 uds)
1 x	Plancha de goma espuma (310x210x8 mm)
1 x	Plancha carbono 350x150x1.0 mm
1 x	Plancha carbono 350x150x5.0 mm
1 x	Bisagra de compuerta aluminio (1 pcs)
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm desmontable (2 pcs)
1 x	Cono hélice plegable 30 mm diametro / eje 3,0 mm
1 x	Bisagra pequeña con pin metalico (12 uds)
1 x	Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
1 x	Plancha ABS 500 x 400 x 2,0 mm (blanco)
1 x	Cono hélice plegable 30 mm diámetro / eje 4,0 mm
1 x	Plancha fibra vidrio 350x150x2.5 mm
1 x	Peel Ply liso 95 g/m2 20 mm x 100 m
1 x	Acople ALU M2 Ø 3 (2 uds)

6,736.71EUR