Top » Catalog » PowerBox Systems » POWER1010/10000

251.91EUR

Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
[POWER1010/10000]

Product description
The Premium™ MAXI servo cable is the thicker variant of the familiar Premium™ cable with a conductor cross-section of 0.35mm². In this case ‘thicker’ means that the current-bearing positive and negative conductors have a cross-sectional area of 0.5mm², while the signal conductor’s cross-section is 0.3mm² in order to save weight. This makes the Premium™ Plus cable ideal for installations where relatively long leads have to be deployed in the wing or fuselage for high-performance servos.
This insulation produces a weight reduction of about 30% compared with the conventional PVC.
For comparison: in spite of its larger cross-section, the 0.5 mm² Premium MAXI cable offered here is lighter than standard 0.25 mm² PVC cable.
The insulation is fire resistant, and its heat resistance is much higher than the usual PVC.
PowerBox Premium MAXI cable is available loose or in bundles. If you need different lengths, please contact us for a quote.

Características
2x 0.5mm² cross section (red and blue)
1x 0.3mm² cross section (white)
30% weight saving
only 14g/m
fire resistant
robust isolation
employed in full-size aviation

under request

Reviews

Quick Find

Shopping Cart

1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Large flex hinge (12 uds)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
2 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Small pinned hinge (12 uds)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Small pinned hinge (6 uds)
1 x	Long pinned hinge (6 uds)
1 x	Long pinned hinge (12 uds)
2 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Indoor hinge with servo arm integraded
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Round flex hinge (12 uds)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Gates hinge
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Locking cable tie 4.6x203 (uds)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	SUS wire 3m (nylon coated)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
2 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Screw-lock connector M2 (2 uds)
3 x	Canopy Latch
2 x	Steering arm 16 mm Ø 4 mm
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
2 x	Cabin latch Fox MDM1 4m (pair)
2 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	SE Ring 240 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
2 x	SE Ring 300 mm (2 pcs)
1 x	20x1000 mm Ring Strap Back To Back
2 x	SE Ring 480 mm (2 pcs)
2 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x
1 x	Foil for sticking flaps and ailerons
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Spikes Band (5 m)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Tape GFK 50 mm
1 x	Tape GFK 25 mm
1 x	SE Ring 360 mm (2 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x	ABS tube 18.0x16.0x1000 mm
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
2 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 2.0x1.0x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Ball link M3 (10 pcs)
1 x	Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
2 x	Aro pasacable Ø20 mm (4 pcs)
1 x	18 mm reinforced hinge
1 x	45 mm rods + T patellas set for direction control
1 x	Motor OS 3820-1200 electric
1 x	Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x	41x5,5 mm wires output (2 pcs)
1 x	Snap for floding prop for 2 mm axi
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Snap pin for micro clevis (10 uds)
1 x	SE Ring 330 mm (4 pcs)
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	2 mm Prop Adapter M5
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	3 mm Long Prop Adapter M5
1 x	Adapter 3,0 mm M6
1 x	Allen wheel collar M3x3
1 x	Steering arm 16 mm Ø 3 mm
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	Allen wheel collar M4x4
1 x	Allen wheel collar M3x5
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	3,2 mm Prop Adapter M5
1 x	Ball Link Plier
1 x	Z Bender - S Type Tool
1 x	Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Rudder forward 80x28 "type Kato"
1 x	Horn DUBRO 1/2A
1 x	Support FUEL DOT V3
1 x	Soporte grifo FESTO (2 pcs)
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Aceite DELUXE turbine Jet Oil 1 litro
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	AC-10 pre-rotacion with motor
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Xplorer3 anemometro
1 x	ABS tube 7.0x5.0x1000 mm
1 x	TX 250 mW especial GOPRO
1 x	MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless
1 x	Motor Mega AC 16/07/08
1 x	Motor Mega AC CAR 10 PRO
1 x	Motor Mega AC 22/35 4S
1 x	Propeller 8x4,3 SlowFlyer
1 x	Extension for SensorSwitch 30cm
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Connectors banna oro 2 mm (M/F)

2,117.82EUR