186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 38x4,5 mm wires output (2 pcs)
2 x Canopy Lock V1 M3 Blue (2 pcs)
2 x Cabin latch Fox MDM1 4m (pair)
1 x Canopy Latch
1 x 41x5,5 mm wires output (2 pcs)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x 28x5 mm wires output (2 pcs)
1 x 100 mm rods set for direction control
1 x Clip fixing for wing (2 pcs)
1 x Allen wheel collar M4x6
1 x Cockpit aluminium closing
1 x 45 mm rods + T patellas set for direction control
1 x 45 mm rods set for direction control
1 x 90 mm rods + T patellas set for direction control
1 x Cable grommet 9.5 mm (4 uds)
1 x Clip mini fixing for wing (2 pcs)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Allen wheel collar M3x5
1 x Aluminium alloy coupler for carbon tube 6/M4
2 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x 100 mm rods + T patellas set for direction control
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x 140 mm rods + T patellas set for direction control
2 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Allen wheel collar M4x4
1 x USB Mini Camera endoscope
1 x Servo NARO Max Std
1 x SIMtransmitter 6 Mode 2
1 x Interface Jack Adapter IKARUS
1 x Interface Realflight Simulator
2 x EasyFLY Addon
1 x GameCommander USB Universal
1 x SE Ring 480 mm (2 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
2 x SE Ring 400 mm (2 pcs)
2 x SE Ring HACKER 300 mm (2 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x 20x200 mm battery rings
1 x SE Ring 200 mm (2 pcs)
1 x SE Ring 330 mm (4 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 250 mm (2 pcs)
1 x SE Ring 360 mm (2 pcs)
1 x Marker ties (20 pcs)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x Spikes Band (5 m)
1 x 20x1000 mm Ring Strap Back To Back
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Dust collector for mould cleaning
1 x 140 mm rods set for direction control
1 x Transmitter Crystal 35 Mc/s Ch 62
1 x Cable grommet Ø 5 mm (4 uds)
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x Albatros ,spare cockpit (Top Model)
1 x Bidule 111 3000 mm Canopy
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Astra (Top Model)
1 x 44.5x17 mm (1.75") Type jets aluminium core wheel
1 x 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel
1 x 102x26 Ø6.0 mm aluminium core wheel
1 x 110x55 mm C SLH KOVO wheel
1 x 90x45 mm hard foam KOVO wheel
1 x 69x25 mm (2.75") axle Ø4 mm aluminium core wheel
1 x Cable S.BUS 3 salidas 100 mm
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x RX external cable for estandar receivers
1 x LOWER TOW HOOK
1 x Round Rod 3,0x1000 mm
1 x Threaded coupler M3 (10 uds)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x ABS tube 20.0x18.0x1000 mm
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x ABS tube 3.0x1.0x1000 mm
1 x ABS tube 3.0x2.0x1000 mm
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Propeller APC 10x7 Electric
1 x Propeller APC 11x4.7 SF Pusher
1 x Propeller APC 14x12 Electric
1 x Propeller APC 13x4 Electric
1 x Propeller APC 13x4 Electric Pusher
1 x Propeller APC 13x6.5 Electric
1 x Foil for sticking flaps and ailerons
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 350 mm (2 pcs)
1 x Cinta Goldfix 1m
2 x ABS Strip 1.0x2.0x1000 mm
1 x Strip 1,5x1,5x330 mm
2 x Round Rod 2,5x1000 mm
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x 76 mm light wheels (2 pcs)
1 x Superlight deluxe wheel 62 mm (2 pcs)
1 x NoNa BB wheel Ø150x45mm in pair
1 x NoNa BB wheel Ø125x35mm in pair
1 x Superlight deluxe wheel 68 mm (2 pcs)
1 x Superlight wheel 100 mm with valve (2 pcs)
1 x Wheel Scale 1/3 Vintage 240 mm / 9.33" (1 par)
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x White smoke bombs AX-3 (10 pcs)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Wheel collar 5 mm Ø (4 uds)
2 x NoNa BB wheel Ø130x40mm in pair
1 x Wheel collar 4 mm Ø (4 uds)
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Lightweight aircraft wheel, 50x18.5x3
1 x DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC)
1 x Superlight deluxe wheel 40 mm (2 pcs)
1 x Wheels 220mm (2 pcs)
1 x Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair
1 x Wheels 270mm (2 pcs)
1 x Actuador lineal HLS12-100210-7.4v
1 x Superlight deluxe wheel 56 mm (2 pcs)
1 x 150 mm inflatable superlight deluxe wheel (2 pcs)
1 x Lightweight aircraft wheel, 55x18.5x3
1 x Wheel Scale 1/4 Vintage 178 mm / 7" (1 par)
1 x Super light ∅45x9 mm axi ∅3 mm metalic core wheel
1 x 100x50 mm SLH KOVO wheel
1 x NoNa BB wheel Ø105x35mm in pair
1 x Mini wheels (3 pcs)
1 x 170x54 mm SLH KOVO wheel with bearing and metal hub
1 x Lightweight aircraft wheel, 45x18.5x2
1 x Wheel ø180 mm AIRTOP Ballon pneumatic
1 x 120x60 mm SLH KOVO wheel
1 x NoNa BB wheel Ø175x55mm in pair
1 x Plastic wheels 30 mm (2 pcs)
1 x Superlight deluxe wheel 45 mm (2 pcs)
1 x Superlight deluxe wheel 50 mm (2 pcs)
1 x Jet wheels 65 mm E-brake 4 mm shaft
1 x Parachute expulsion foam
1 x Remote electric ignition system
1 x FunCup XL RR
1 x DOMINO 46-55 Trainer 1583 mm
1 x TWIST planeador gomas
1 x Propeller APC 11x7 SF
1 x Propeller APC 10x10 Electric
1 x Propeller APC 11x8 Electric
1 x 30 cm DEANS female connector
1 x Propeller APC 14x10 Electric
1 x Landing gear retract neumatic (Jet Legend)
1 x Round Rod 6,0x1000 mm
1 x ABS Strip 1.5x2.0x1000 mm
1 x Strip 3,5x1,75x330 mm
1 x Program 5v SIO RS 232
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x TRAINER RC Pilot V2 90" w/r ARF
1 x LASER 73" 1.85m (05) PILOT
1 x TMM 2512-3S heli
1 x Swing 1000
1 x TMM 1210-3S heli
1 x WINGO 2 PNP
1 x CESSNA 50E White/Red
1 x JOKER 3 1550mm
1 x BULLIT Wing 1095 mm
1 x Support conector MPX (6 pcs)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Support pump Xicoy X45
1 x Black 2,4 GHz antenna exit guides (2 pcs)
1 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x GPS Sensor + Logger OPTronics
1 x PowerBox Smokepump
1 x Charger 220/110v
1 x 100m servo "Premium" wire (white/red/blue)
6,200.09EUR
Manufacturers
Languages
Español English
Currencies