2.75EUR

Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
[POWER1010/1]


Product description
The Premium™ MAXI servo cable is the thicker variant of the familiar Premium™ cable with a conductor cross-section of 0.35mm². In this case ‘thicker’ means that the current-bearing positive and negative conductors have a cross-sectional area of 0.5mm², while the signal conductor’s cross-section is 0.3mm² in order to save weight. This makes the Premium™ Plus cable ideal for installations where relatively long leads have to be deployed in the wing or fuselage for high-performance servos.
This insulation produces a weight reduction of about 30% compared with the conventional PVC.
For comparison: in spite of its larger cross-section, the 0.5 mm² Premium MAXI cable offered here is lighter than standard 0.25 mm² PVC cable.
The insulation is fire resistant, and its heat resistance is much higher than the usual PVC.
PowerBox Premium MAXI cable is available loose or in bundles. If you need different lengths, please contact us for a quote.

Características
2x 0.5mm² cross section (red and blue)
1x 0.3mm² cross section (white)
30% weight saving
only 14g/m
fire resistant
robust isolation
employed in full-size aviation


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Banna gold connector 2,5 mm (M/F)
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x 2 mm male connector (2 pcs) with safety connector
1 x Connectors banna oro 3 mm (M/F)
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x XH female balance (3S) connector (2 pcs)
1 x Connectors banna oro 8,0 mm (M/F)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Cap closure 33/23.5mm (2 uds)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
2 x One touch canopy lock
1 x Steering arm 12 mm Ø 4 mm
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Cierre cabina aluminio Ø4, I=10 mm
2 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x SUS wire 3m (nylon coated)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Aluminium alloy coupler for carbon tube 6/M4
2 x Covered closure or fairings
4 x Locking cable tie 2.5x100 (uds)
1 x Steering arm 16 mm Ø 3 mm
1 x Locking cable tie 3.2x142 (uds)
2 x Canopy Latch
1 x Gates hinge
1 x Gates hinge aluminium (1 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
2 x Long pinned hinge (6 uds)
1 x Small pinned hinge (12 uds)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Flap hinge (6 pcs)
1 x Long pinned hinge (12 uds)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Micro flex hinge (12 uds)
1 x Flap hinge 33x9 mm (6 pcs)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Strip 2,0x2,0x330 mm
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Parachutist
2 x Motor OS 3820-1200 electric
1 x Servo Arm aluminium ALU-STAR
1 x Stickers-digit for marking
1 x Snap long M2 (10 uds)
1 x Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
2 x Landing gear frontal support 25x32x16
1 x Allen wheel collar M4x4
1 x Cable grommet 9.5 mm (4 uds)
1 x Allen wheel collar M3x3
1 x Pushrod octagone 3/2 with coupler M2
1 x Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Truck-trailer for gliders 720 x 239 mm
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Dean "T" - Futaba Adapter
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x 4 LiPo XH>EH adapter
1 x Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x Lead with adhesive (2 pcs)
1 x Snap for floding prop for 2 mm axi
2 x Split pin 1.6x16 mm (10 uds)
1 x Press fitting for 0,5 diam. steel cable (10 pcs)
2 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Snap pin for micro clevis (10 uds)
1 x Press fitting for 1,0 diam. steel cable (10 pcs)
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Split pin 1x8 mm (10 uds)
2 x Wing bolts M3 Steel screw blue (2 pcs)
1 x 45 mm rods set for direction control
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x P 17×5.8 Prop-2PCS/PAIR
1 x Combo AM480 T-Motor 650 Kv
1 x T-Motor U7-V2.0 Kv420
1 x Motor OS 3805-1200 electric
1 x STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x Landing gear frontal support 29x26x13,5
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x PH5 adapter for 5mm M8 axi for AXI2820 y 2826
1 x Prop Saver for AXI 22xx/xx
1 x SPARK Switch 12v
1 x SPARK Switch 7.4v
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x 41x5,5 mm wires output (2 pcs)
1 x Cable grommet Ø 5 mm (4 uds)
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Hitec 20 mm servo arm
1 x 54 mm Futaba servo arm tandem with ball link
1 x Brazo Servo XTorque 52 mm HITEC 25T-6
1 x Futaba 30 mm servo rounded arm
1 x Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al
1 x Cable coupler M2x66 (2 uds)
1 x Futaba 52 mm servo arm
1 x Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x Support ECU Xicoy X-45
1 x 90 mm rods + T patellas set for direction control
2 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x 250 mm / 16 mm Airbrakes
1 x 140 mm rods + T patellas set for direction control
1 x Pushrod octagone 4/3 with coupler M3
1 x AXI Cooler 41xx
1 x Motor holder AXI
1 x Male connector for 10 pines AWG
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Connector CAN 15
1 x EWC3 40 cm wing connector
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x Female connector for 16 pines AWG
1 x Female connector for 12 pines AWG
1 x EWC3 100 cm wing connector
1 x Connector Sub-D 2+5 Female
1 x SPARK Switch 5.9v
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x Male connector for 16 pines AWG
1 x Hacker X-Pro USB interface V2
1 x Female connector for 20 pines AWG
1 x Cabling for Fox MDM1 wings
1 x JETImodel Addcap 1640
1 x Connector Sub-D 2+5 Male
1 x Male connector for 20 pines AWG
1 x DPSI Ampere battery backer
1 x Male connector for 6 pines AWG
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x Male connector JST SH 1.0mm with 10 cm wire
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x Micro Switch button
1 x Female connector for 6 pines AWG
1 x Male connector for 12 pines AWG
1 x Three-position switched channel, short
1 x DPS Switch JR/JR
1 x Short Switch On/Off micro
2 x EWC6 40 cm wing connector
1 x Fuel Dot (Silver)
1 x 38x4,5 mm wires output (2 pcs)
1 x Wing bolts M6 Steel screw Red (2 pcs)
1 x Steering arm 16 mm Ø 4 mm
1 x DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x 28x5 mm wires output (2 pcs)
1 x DPSI magnetic switch actuator (housing)
1 x Cockpit metalic closing
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Futaba 25 mm servo arm with M3 ball link
1 x Ball link M2 (10 pcs)
1 x Futaba 24/30 mm servo pull-pull double arm with ball link
1 x Futaba 38 mm servo arm with ball link
1 x Ball link M2,5 (10 pcs)
1 x FUTABA 20 mm servo arm with ball link
1 x HITEC 20 mm servo arm with ball link
1 x Ball link M3 (10 pcs, flat ball)
1 x Extension for SensorSwitch 30cm
1 x Conector JR Servo female (10 pcs)
1 x 10m servo "Premium" wire (white/red/blue)
2 x 30 cm MULTIPLEX female connector
2 x Vess propeller 13x6 S
1 x Adapter lead MPX/EC3
1 x 100m servo "Premium" wire (white/red/blue)
3,867.59EUR
Manufacturers
Languages
Español English
Currencies