186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x Pilot "Duke" Legends Series (Slimline)
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x 1/4 Pilot "Mike"
1 x 1/12 Pilot "Cougar"
1 x 1/12 Pilot "Tom"
1 x Piloto Jet "Red" 1/6 Scale
1 x 1/6 Pilot "Tony"
1 x Pilot JAN 1/4 Saiplanes
1 x 1/12 Pilot "Langley"
1 x 1/6 Pilot "Buddy"
1 x Pilot "Dick" Legends Series (Slimline)
1 x 1/6 Pilot "Garry"
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x Pilot "Goose" (Slimline)
2 x 1/6 Pilot "Cindy"
1 x Pilot "Adolf" Legends Series (Slimline)
1 x 1/6 Pilot "John"
1 x 1/4 Pilot "Heidi"
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x 1/12 Pilot "Fighter"
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Covered closure or fairings
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x L cockpit anchor "tipe F3A" (2 pcs)
2 x Cierre cabina aluminio Ø4, I=10 mm
1 x Extinguisher CO2 - 2 Kg
1 x Locking cable tie 3.2x142 (uds)
1 x Canopy Lock V1 M3 Red (2 pcs)
2 x Locking cable tie 4.6x203 (uds)
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
2 x Screw-lock connector Ø 2 mm (2 uds)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x DYNAMOMETER S-1580
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Lock washer 4.3 mm (20 pcs)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Flat washer 1.7 mm (20 pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x Quicklock washer 2 mm (10 pcs)
1 x Lock washer 2.7 mm (20 pcs)
1 x ABS angle 4,0x4,0x1000 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Small aluminium horn blue (2pcs)
1 x Z Bender - S Type Tool
1 x M3 INDUSTRIAL ball link (2 uds)
1 x White silicone 0,25 mm² wire (25 m)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Support pumb/filter Xicoy X45
1 x Fully Threaded Steel Rod M3
1 x Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x Canopy Latch
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Landing gear frontal support 25x32x16
1 x Pushrod greyline 3/2 with coupler M2
1 x Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Screw-lock connector M2 (2 uds)
1 x Steering arm 16 mm Ø 3 mm
1 x Split M1,2x10 (10 pcs)
1 x Optical RPM Sensor
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Locking cable tie 2.5x100 (uds)
1 x Split pin 1x8 mm (10 uds)
1 x Steering arm 16 mm Ø 4 mm
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
2 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x 80 mm rods set for direction control
1 x Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Cable grommet 9.5 mm (4 uds)
1 x 28x5 mm wires output (2 pcs)
1 x Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x Electric spoiler 250 mm (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x Screw M3x30 (10 pcs)
1 x Allen wheel collar M3x3
1 x 140 mm rods set for direction control
1 x Wheel 22 mm
1 x Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds)
1 x Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m
1 x 102x26 Ø6.0 mm aluminium core wheel
1 x Wheel collar 5 mm Ø (4 uds)
1 x Wheel FEMA 178 mm / 8 mm
1 x Wheel FEMA 100 mm / 6 mm
1 x 2.5 inch aluminium core wheel (1 pcs)
1 x Wheel FEMA 152 mm / 8 mm
1 x Futaba male 40 cm extension
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Extension PVC 150 cm (Graupner)
1 x Futaba Female 40 cm extension
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x Lock washer 2.2 mm (20 pcs)
1 x DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS
1 x Wheel FEMA 165 mm / 8 mm
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Wheel 18 mm
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Tapping Screw M2.9x13 (10 pcs)
1 x Tapping Screw M2.9x9.5 (10 pcs)
1 x Cable S.BUS 3 salidas 300 mm
1 x Conector MR-60 (pareja)
1 x Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x Dean "T" - Futaba Adapter
1 x 70 mm INO spinner (carbon imitation)
1 x Spinner Alumin. fixed propeller 45 mm / 3,2 mm
2,935.16EUR
Manufacturers
Languages
Español English
Currencies