Inicio » Catálogo » PowerBox Systems » POWER8015

186.00EUR

Bomba de humo JETs PowerBox 2 salidas
[POWER8015]

Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Horn aluminio pequeño azul (2pcs)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Horn corto de latón M3 para cable (2 pcs)
2 x	Acople ALU M3 Ø 5 (2 uds)
1 x	Horn de mando 5/20 con rótula M2
1 x	Acople ALU Izda. M2,5 Ø 3 (2 uds)
2 x	Horn aluminio anodiazado 6 mm rojo con rótula
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Cable con accesorios
1 x	Fibra carbono tela 160g/m2 127 cm x 10 m
1 x	Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
1 x	Horn de mando 6/20 con rótula M3
1 x	Conjunto de mandos arriostrados
1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 15 m
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m
1 x	Fibra carbono "MANGA" 12k 170 mm x 5 m
2 x	Horn de mando 5/15 con rótula M2
1 x	Horn corto de latón M4 para cable (10 pcs)
2 x	Horn aluminio roscado 6 mm con rótula
1 x	Horn corto de latón M4 para cable (4 pcs)
1 x	Horn de mando 6/27 con rótula M3
1 x	Fibra carbono tela 160g/m2 127 cm x 5 m
1 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Horn de mando 6/35 con rótula M3
1 x	Horn aluminio pequeño rojo (2pcs)
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (10 pcs)
1 x	Fibra carbono tela 160g/m2 100 cm x 25 m
1 x	Cuña desmoldeo roja (5 pcs) [40x20mm]
1 x	Conector banana oro 8,0 mm 5 pcs (hembra)
1 x	Conector banana oro 5,5 mm
2 x	Conector Servo hembra 4 pines
3 x	Conector 2 mm hembra (2 pcs) con conector de seguridad
2 x	Conector equilibrado XH (2S) hembra (2 pcs)
1 x	Conector 5,0 mm EC5 macho con funda (2 pcs)
2 x	Conector equilibrado XH (3S) macho (2 pcs)
1 x	Conector Centralita Optotronix Aurora
1 x	Conector DEANS hembra 30 cm
3 x	Conector DEANS (T)
3 x	Conector banana oro 3 mm
2 x	Conector CAN 15
1 x	Conector ala MPX 8 pines con conector M/H
1 x	Conector DEANS 4 pines (1 par)
2 x	Conector 5,0 mm EC5 hembra con funda (2 pcs)
1 x	Conector banana oro 3,5 mm
1 x	Set de tubos de carbono (Ø38 mm y Ø14 mm)
1 x	Tubo acero (L 1000 mm, Ø12 mm, Ø11,7 mm)
1 x	Tubo aluminio (L 1000 mm, Ø4,0 mm, Ø3,1 mm)
1 x	Tubo ABS 7,0x5,0x1000 mm
1 x	Tubo acero (L 1000 mm, Ø7 mm, Ø6,7 mm)
1 x	Tubo carbono (L 1000 mm, Ø0,7 mm, Ø0,3 mm)
1 x	Cierre cabina V1 M3 Azul (2 pcs)
1 x	Brazo direccional 16 mm Ø 4 mm ( 2 uds)
1 x	Cierre de plástico para cabinas
2 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Abrazadera 3.2x142 (20 uds)
1 x	Anclaje micro varilla mando Ø 1 mm prisionero/arandela (2 uds)
1 x	Casquillo para grimpar cable de 0,85 mm (10 pcs)
1 x	Anclaje varilla mando M2 mm prisionero/tuerca (2 uds)
1 x	Anclaje varilla mando Ø 1.5 mm prisionero/arandela (2 uds)
1 x	Brazo direccional 12 mm Ø 3 mm ( 2 uds)
1 x	Casquillo para grimpar cable de 1,3 mm (10 pcs)
1 x	Cierre cubiertas o carenados
1 x	Brazo direccional 16 mm Ø 3 mm
1 x	Ferrita con funda
1 x	Ferrita 27x14x7 mm
1 x	Ferrita 14x8x5.5 mm
1 x	Piloto 1/10 "Jimmy"
1 x	Piloto civil "G-Man" tamaño 9cm (Slimline)
1 x	Oracover CARBON Metalic 1m
1 x	Oratex White 2m
1 x	Rótula V2 M2 5Diam negra (2 pcs)
1 x	Liston ABS I 20x10x1000 mm
1 x	Disolvente barniz tensor 500 ml
1 x	Plancha de balsa 1,0x100x1000 mm
1 x	Medidor angulos tamaño pequeño
1 x	Correa V2 doble
1 x	Guías externas para antena de 2,4 GHz negras (2 pcs)
1 x	Capuchón L interruptor aluminio negro
1 x	Prolong/Adap correa HITEC Aurora 9, JR y Spectrum (azul)
1 x	Bateria FUTABA 18MZ
1 x	Capuchón M interruptor aluminio rojo
1 x	Reenvío de Profundidad 90x28 mm "tipo Kato"
2 x	Soporte rojo para conectores de 3,5 mm
1 x	Reenvío de Profundidad 70x28 mm "tipo Kato"
2 x	Conector equilibrado XH (6S) macho (2 pcs)
1 x	Acople ALU M2,5 Ø 6 (2 uds)
2 x	Conector banana oro 2,5 mm (pareja)
1 x	Horn micro (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
2 x	Conector 2 mm macho (2 pcs) con conector de seguridad
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 4 m
2 x	Soporte conector MPX
1 x	Horn de mando largo ajustable aluminio con rodamiento 2,8x24
1 x	Horn de mando variable 6 mm M3
1 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Horn de mando variable inclinado 6 mm M3
1 x	Horn aluminio RH largo (2pcs)
1 x	Conector MR30 (macho)
1 x	Horn micro T2 Ø 1 (2 uds)
1 x	Pletina MPX (5 pcs)
1 x	Protector Conector Dean-T (1 pareja)
1 x	Horn largo de latón M2 para cable (10 pcs)
2 x	Soporte carbono MR30 (2 pcs)
1 x	Horn de mando variable 5 mm M2
2 x	Conector MPX macho
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	SistemaLDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 mm
1 x	Horn extra largo 60x30
1 x	Motor OS 3820-1200 eléctrico
1 x	Soporte conector MPX hembra (6 pcs)
1 x	Pletina MPX 8 pines (5 uds)
2 x	Conector XT-60 (macho)
1 x	Soporte conector MPX macho (6 pcs)
1 x	Piloto JAN 1/4 Veleros
1 x	Taco goma 11 mm (14 pcs)
1 x	Pasacable de goma Ø 4 mm (4 uds)
1 x	Piloto 1/6 "Tony"
1 x	Tijeras curvas 16cm - GFK/CFK/Aramid
1 x	Elevador Cierva C30
1 x	Parte inferior del rotor
1 x	Prolong. Macho XH 30 cm para 4 elem. cables silicona 0,25 mm2
1 x	Funda Protectora espiral negra cables Ø 0,5/50 mm - 25 m
1 x	Prolong. Macho XH 30 cm para 2 elem. cables silicona 0,25 mm2
1 x	Prolong. Macho XH 30 cm para 5 elem. cables silicona 0,25 mm2
1 x	Condensador AddCAP 10AS
1 x	DUPLEX 2.4EX Central Box 220
1 x	Cable PPM - Jack (mono) DC/DS Tx DUPLEX 2.4EX
1 x	Prisionero allen M3x5
1 x	Conjunto bieleta 100 mm y rótulas T. para dirección
1 x	Mini Clips para fijar Ala (2 pcs)
1 x	Conjunto bieleta 140 mm y rótulas T. para dirección
1 x	Pasacable de goma 9.5 mm (4 uds)
1 x	Prisionero allen M3x3
1 x	Prisionero aluminio 5 mm Ø (4 uds)
1 x	Cono Aluminio hélice fija 30 mm diámetro / eje 2,3 mm
1 x	Cono NUT M6
1 x	Cono Aluminio hélice fija 40 mm diámetro / eje 5,0 mm
1 x	Stick emisora V1/M3 Plata Duraluminio Futaba/Hitec/Spektrum
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Cono NUT M6
1 x	Cono NUT M5
1 x	Cono Aluminio hélice fija 30 mm diámetro / eje 3,2 mm
1 x	Cono Aluminio hélice fija 40 mm diámetro / eje 3,0 mm
1 x	Cono NUT 1/4x28
1 x	Stick para emisora FUTABA con interrup. 3 posiciones + boton
1 x	Stick emisora V5/M3 Azul duraluminio Futaba/Hitec/Spektrum DX8 (
1 x	Soporte FPV Station para pupitre TX-Tray V1
1 x	Stick emisora V5/M4 Azul duraluminio JR/DX7
1 x	Stick emisora V5/M3 Rojo duraluminio Futaba/Hitec/Spektrum DX8 (
1 x	Conector MR30 (hembra)
1 x	Conector equilibrado XH (8S) hembra (2 pcs)
1 x	Conector equilibrado XH (5S) hembra (2 pcs)
1 x	Conector equilibrado XH (3S) hembra (2 pcs)
1 x	Conector XT-60 (hembra)
1 x	Conector equilibrado XH (2S) macho (2 pcs)
1 x	Conector equilibrado XH (9S) hembra (2 pcs)
2 x	Conector equilibrado XH (6S) hembra (2 pcs)
1 x	Skies 2x 335 mm + 1x Esqui 250mm
1 x	Conector equilibrado XH (4S) hembra (2 pcs)
1 x	Conector MPX negro macho
2 x	Conector MPX macho (doble PIN)
1 x	Liston ABS 1,0x5,0x1000 mm
1 x	Brazo servo aluminio V1-Hitec 1,25" M3 azul
1 x	Conectores Kontronik (10 conectores, 5 pares)
1 x	Conector MULTIPLEX hembra 30 cm
1 x	Arandela conica ancha alumino M3 rojo (4 pcs)
1 x	Brazo servo aluminio V1-Futaba 23 mm M2 rojo
1 x	Adaptador BlueCom™ (iOS)

4,278.91EUR