186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x ABS tube 8.0x6.0x1000 mm
1 x Horn 6/20 with M3 Bearing
1 x RH long aluminium horn (2pcs)
1 x Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x Fascination 3600 mm, Spare Wings (Top Model)
1 x Screwdriver for Torx® TX8
1 x Fox MDM-1 ARF 3.5m Orange
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x IMPULSE 2 F3F
2 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x Propeller APC 13x6.5 Electric Pusher
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Conector XT-30 (hembra)
1 x Propeller 12x6 Falcon electric
1 x Conector JR Servo male (50 pcs)
1 x Propeller balancer
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x TX-Tray V1 (L) (Black)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Electric spoiler 300 mm (2 pcs)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x GameCommander USB Universal
1 x Canopy Latch
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Conector JR Servo male (10 pcs)
1 x External LED's (2 pcs)
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x DUPLEX R18 EX 2,4GHz + Rsat2
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Wingstabi 9 DR M-Link Receiver
1 x Multiplex True Air Speed + Vario Sensor to M-LINK
1 x Ant. Cable R606/17/08/14FS L:1500mm
1 x White 2,4 GHz antenna exit guides (2 pcs)
1 x Cable with accesories
1 x X-RAY Micro QR
1 x JETImodel Addcap 820
1 x 6 mm blue aluminium threaded horn with patella
1 x Small aluminium horn gold (2pcs)
1 x ABS tube 10.0x8.0x1000 mm
1 x ABS tube 6.0x5.0x1000 mm
1 x ABS tube 6.0x4.0x1000 mm
1 x Glidder Mü13e (Bergfalke)
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Hot Glue Stick BLACK
1 x Propeller APC 10x7 Electric
1 x Propeller APC 14x10 Electric
1 x Propeller 8x4 Electric
1 x Avia (Top Model)
1 x Extension silicon 30 cm female (Futaba)
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x IKURA 4.0 m
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Digital precision scale up to 2000 g
1 x Starter Sullivan-STAR 601
1 x Pilot "Goose" (Slimline)
1 x FANTASY ARF 3.0m, Fundas alas
1 x Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m
1 x Chili Race F3K (aramid nose)
1 x Field folding model stand SebArt
1 x Propeller POWER-PROP 14x9 Izda
1 x 2 mm female connector (2 pcs) with safety connector
1 x Futaba Aero Large Case - Internal Foam
1 x ABS angle 4,0x4,0x1000 mm
1 x Glases Moritz
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Electric spoiler 250 mm (2 pcs)
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x DUPLEX TGs 2,4 GHz (transmitter module)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Battery charging cable XT60
1 x DUPLEX 2.4EX MAlti (Rev.2)
1 x Profile ABS Square 4 x 1000 mm
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x MPX-Dean "T" Adapter
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x R617 FS 2,4 GHz receiver
1 x Receptor GRAUPNER GR-24 HoTT
1 x DUPLEX R7 receiver REX Assist
1 x Conector JR Servo female (10 pcs)
1 x Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.)
1 x Receiver DUPLEX R5L EX 2.4 GHz
1 x DUPLEX R10 receiver 2,4GHz
1 x Receiver FUTABA R6004 FF FAST
1 x DUPLEX R6 receiver REX Assist
1 x Futaba R3006SB T-FHSS 2.4GHz
1 x Extension for SensorSwitch 30cm
1 x Brass control horn M3 short for wire (2 pcs)
1 x ABS tube 3.0x1.0x1000 mm
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x 20 mm carbon horn
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x 6 mm red aluminium threaded horn with patella
1 x Glider IKARUS
1 x THERMIK XL 4000 mm
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x ABS tube 14.0x10.0x1000 mm
1 x X-RAY Micro QR (Elevator)
1 x Brass control horn M2 short for wire (2 pcs)
1 x Brass control horn M4 short for wire (10pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Mini VISION "spread tow" CFK
1 x Horn with ball 55x40
1 x Glider KNIRPS
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x LH long aluminium horn L31xH30 (2pcs)
1 x ABS tube 3.0x2.0x330 mm
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Fox 4000 mm (Airwold)
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Round Rod 1,25x1000 mm
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Surface Indicator Gauge Small
1 x Fascination 3600 mm, Canopy (Top Model)
1 x Truck-trailer for gliders 720 x 239 mm
1 x Crimping tool
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Conector MR-60 (pareja)
1 x Starter EM Gear Power 80
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Cable Cargador FUTABA
1 x ASG 32 560 mm
1 x Propeller POWER-PROP 11x9
1 x Propeller APC 13x8 Electric
1 x Propeller POWER-PROP 14x10
1 x Propeller 11x4,7 SlowFlyer
1 x Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe
1 x Extension silicon 30 cm male (Graupner)
1 x Piloto Jet "Green" 1/6 Scale
1 x 1/6 Pilot "Buddy"
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x PVC 0,14 qmm servos wire Graupner (100 m)
1 x Stickers-digit for marking
1 x ABS Strip 1.0x4.0x1000 mm
1 x 20x13 Falcon electric carbon prop (64g)
1 x Propeller APC 13x10 Electric
1 x Avia spare fouselage CF reinforced (Top Model)
1 x Propeller POWER-PROP 14x12
1 x 1/10 Pilot "Jimmy"
1 x Propeller APC 10x3,8 SF
1 x WingFix ULTRA Black Edition
1 x Extension 15 cm (Futaba)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x 1/6 Pilot "Tony"
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x 2,0x50 mm allen screwdriver
1 x ABS Strip 1.5x8.0x1000 mm
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x ABS Strip 1.5x6.0x1000 mm
1 x Conector MT-60 (pair)
1 x Round Rod 5,0x1000 mm
1 x Fox MDM 1 4000 mm DeLuxe,wing joiner
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x ASW 15 5000 mm (Airwold)
1 x Conector FUTABA Servo male (10 pcs)
1 x 1/4 Pilot "Heidi"
1 x Propeller APC 12x6 Electric Pusher
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Propeller electric carbon 9.5x5
1 x ALBATROS 3.0 m (orange/white)
1 x Propeller POWER-PROP 13x8
1 x Starter 12v (Max 90 and 15ccm)
1 x Albatros red/white (Top Model)
1 x Aero-Master Fuselage (Aero-naut)
1 x LO 100 Scale 1:2 - Modellbau Bruckmann
1 x Propeller 9x4,7 SlowFlyer
1 x Vacuum bag, 1200 mm x 50 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Medidor ángulos y/o incidencias
1 x Propeller APC 10x10 Electric
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Screwdriver for Torx® TX6
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x ABS I Strip 10x5x1000 mm
1 x Connectors banna oro 0,8 mm (M/F)
1 x Conector BEC female (10 pcs)
1 x Propeller APC 10x5 Electric Pusher
1 x Propeller APC 13x4 Electric Pusher
1 x Propeller 3x3
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Propeller APC 10x5.5 MR Electric multirrotor PUSHER
1 x Field folding model stand
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Extension silicon 10 cm (Futaba)
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x PVC 0,08 qmm Graupner servos wire (5 m)
1 x ABS I Strip 20x10x1000 mm
1 x Z Bender - S Type Tool
1 x Mini DART 2 F3K carbon light 1m Green
1 x Ball Link Plier
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
1 x Silicone red 0,25 mm² wire (25 m)
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Extension lead 15 cm Multiplex
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x Xplorer3 anemometro
1 x Ion Pro NG electric with flaps ORANGE (JP Model)
1 x Tow hook for tug
1 x Propeller electric carbon 8.5x6
1 x Extension PVC 150 cm (Graupner)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x BIG MOSNTER
1 x Propeller electric carbon 8.5x5
1 x Banna gold connector 2,5 mm (M/F)
1 x Propeller POWER-PROP 10x7 Izda
1 x Propeller 8x4,3 SlowFlyer
1 x Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models)
1 x 1/12 Pilot "Tom"
1 x Fox MDM 1 6000 mm
1 x Propeller APC 11x8 Electric
1 x ABS Strip 1.0x2.0x1000 mm
1 x Propeller APC 12x8 SF
1 x Chili F3K 2 wing servo mounted
1 x ARAMID honeycomb 1300x2600x2 mm
1 x DELPHIN Race 3.6m c64
1 x Propeller APC 11x3.8 SF
1 x Crimping tool
1 x Screwdriver for Hexagon 1,27mm
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x ASH 31 Mi Scale:1/3 - 7m, elevator
1 x Strip 3,5x1,75x330 mm
1 x Bag connector 2 mm
1 x Propeller POWER-PROP 15x10
1 x Fascination 3600 mm (Top Model)
1 x Premium servo extension 50cm
1 x Propeller electric carbon 8.5x7
1 x Propeller POWER-PROP 14x8
1 x Piloto jet 130 mm
1 x Adapter lead MPX/EC3
1 x PPM Encoder Module
1 x Battery voltage telemetry
1 x Lock washer 4.3 mm (20 pcs)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Glases Ace
1 x JETImodel SINGLE BEC
1 x TP/TopFuel - XH 2/3S Adapter
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x USB Mini Camera endoscope
1 x Flat washer 1.7 mm (20 pcs)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Profile ABS Square 1 x 1000 mm
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x Transmitter Balancer Futaba V
1 x SWTU2 switch
1 x Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue)
1 x Locking cable tie 4.6x203 (uds)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x CC 03
1 x Canopy Sweet / Siesta
1 x Cockpit plastic closing
1 x DUPLEX 2.4EX MFlow2 Gas 800
1 x Quicklock washer 2.5 mm (10 pcs)
1 x Glases Nimbus
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x PIX Hawk with accesories
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Locking cable tie 3.2x142 (uds)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Decorative caps, multicoloured
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x U Profile ABS 3,0x6,0x1000 mm
1 x U Profile ABS 2,0x4,0x1000 mm
1 x Switch Cap L (Red)
1 x Receptor CORE PBR-26XS 26ch
1 x TrainerCord (master-learner)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Quicklock washer 4 mm (10 pcs)
1 x MT 125 temperature sensor
1 x Interface Jack Adapter IKARUS
1 x Lock washer 3.2 mm (20 pcs)
1 x Switch Cap L (Blue)
1 x Flat washer 4.3 mm (20 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x DUPLEX 2.4EX MT 300 EX
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Duplex 2.4 EX TopFuel MTAG Battery Reader
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Contest-S-Pult-Carbon mc-20/mc-24
1 x Circlick securite
1 x XICOY X45 rail
1 x Extractor piñones 2.3/3.2 mm
1 x 30 cm BEC cable (female)
1 x DUPLEX R14 receiver 2,4GHz
1 x Antenna holder bracket double
34,572.69EUR
Manufacturers
Languages
Español English
Currencies