1 x | VIPER 1.7 Tailpipe + Fuel Tank 1500ml |
1 x | Hovercraft sailcloth |
2 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | VIPER JET G2 Esq. 2 White/Red |
1 x | VIPER JET G2 Esq. 5 Green/White/Blue |
1 x | VIPER 1.7 Electric break wheels + structure |
1 x | L-39 Albatros 1:4.75, Electric retract landing gear |
1 x | TWIST planeador gomas |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Crimping tool |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | 1,5x50 mm allen screwdriver |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Dremel 3000 130W |
2 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
2 x | Field folding model stand |
3 x | Truck-trailer for gliders 720 x 239 mm |
1 x | 20x200 mm battery rings |
1 x | 75 mm |
1 x | 33,0 mm propeller (rigth propeller) |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
4 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
2 x | 290 mm 8x4 M4 shaft ship |
1 x | Jeti Black cap |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | Cap closure 33/23.5mm (2 uds) |
2 x | Digital Air Speed Sensor And Pitot Tube Set |
2 x | 3 mm Leader (L 100 mm) |
2 x | 45 mm rods + T patellas set for direction control |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
3 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | ABS Strip 1.0x4.0x1000 mm |
1 x | ABS tube 6.0x5.0x1000 mm |
2 x | ABS I Strip 20x10x1000 mm |
1 x | ABS tube 6.0x4.0x1000 mm |
2 x | Blind nut M4 (4 pcs) |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Horn 6/20 with M3 Bearing |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
2 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Extension silicon 10 cm (Graupner) |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Circlick securite |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Extension silicon 100 cm (Futaba) |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Extension lead 15 cm Multiplex |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Cabel "Y" 15 cm |
1 x | Extension 100 cm (Futaba) |
2 x | Boomerang SPRINT V2 Yellow/Black |
1 x | 50N turbine start protection tube |
1 x | Servo NARO Max Std |
1 x | Smoke pump RCEXL |
2 x | JM electric Pump |
2 x | PowerBox Smokepump JETs 2x outside |
1 x | Secraft Fuel system v2, red color |
1 x | Servo ROBBE FS-31 Pico Servo |
1 x | Servo Robbe FS 128 BB MG HV Digital |
2 x | Escalera gris 7 mm (L 60mm) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Tip wing protector 28x10x12 (2 pcs) |
3 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | Straightened rod Ø 14.0 mm x 1000 mm |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Window mounting channel 5m |
2 x | Split pin 1.6x16 mm (10 uds) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | WingFix ULTRA Black Edition |
2 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Ferrita 17x10x6.5 mm |
2 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Strip ABS 2.0x5.0x1000 mm |
2 x | M3 black washers (4 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
2 x | Quicklock washer 4 mm (10 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Round Rod 4,0x1000 mm |
2 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Capstan of plastic 88x30x36 mm |
1 x | Capstan of plastic 125x72x45 mm |
1 x | Cleat 20 mm (2 pcs) |
2 x | Davit 85 mm (2 pcs) |
1 x | Cannon 53/6 mm |
2 x | Escalera gris 12x60 mm |
2 x | Doppelpoller 17 mm (6 uds) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Tip wing protector 30x10 (2 pcs) |
3 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
3 x | Straightened rod Ø 2.5 mm x 1000 mm |
2 x | Triple rod con. 2mm Pushrod (2 pcs) |
2 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Propeller balancer |
1 x | Field folding model stand SebArt |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Angle measurer |
2 x | Steering arm 12 mm Ø 4 mm |
2 x | Wheel collar 4 mm Ø (4 uds) |
2 x | Snap short M2 (10 uds) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | Straightened rod Ø 0.5 mm x 1000 mm |
2 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | SUS wire 3m (nylon coated) |
3 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | Straightened rod Ø 5.0 mm x 1000 mm |
2 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Surface Indicator Gauge Small |
2 x | Tip wing protector 40x14 (2 pcs) |
1 x | PIX Hawk with accesories |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | PPM Encoder Module |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Straightened rod Ø 4.5 mm x 1000 mm |
2 x | Snap pin for micro clevis (10 uds) |
2 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Angle of incidence meter |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
2 x | Straightened rod Ø 8.0 mm x 1000 mm |
2 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
2 x | Propeller balancer |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Blue Aluminium lock nut M2 (4 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Lock nut M3 (10 pcs) |
1 x | Servo M2x5/16 screw (4 pcs) |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Nylon Screw M4x20 |
3 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Lock nut aluminium M2.5 (4 pcs) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
2 x | Blind nut M6 (4 pcs) |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Ferrita 14x8x5.5 mm |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | Ferrita con funda |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Lock nut M4 (10 pcs) |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | Lock nut M2 (20 pcs) |
1 x | Screws 2,2 x 6,5 mm (20 pcs) |
2 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | Carbon plate 350x150x3.0 mm |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Carbon plate 350x150x2.0 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Carbon plate 550x350x1.0 mm ECOTECH |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Fiberglass plate 350x150x4.0 mm |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Fuselage Bags JEEMO |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Fiberglass plate 350x150x3.0 mm |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Extension silicon 75 cm (Futaba) |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Cable coupler M2 (10 uds) |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Extension silicon 50 cm (Graupner) |
1 x | TURBINATOR 2 ORANGE/SILVER 1778 mm Combo |
1 x | TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | PowerFuel RX V2 Fuel Pump |
1 x | DUPLEX 2.4EX Central Box 320 |
1 x | KAVAN Hand crank fuel pump |
1 x | OPUS-V / Jet-CC-BF |
1 x | |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Electric Fuel pump |
1 x | Variable Flow Smoke Pump System |
1 x | Electric Fuel Pump 12v |
1 x | RANGER Jet Red/Yellow 1.854mm combo |
2 x | Plastic fan 17x48 mm (2 pcs) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Split M1,2x10 (10 pcs) |
2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | 12 mm dogdrive props |
1 x | Propeller AERO-NAUT M4 50 mm (4 Blades Right |
1 x | Ojos de buey 13x9x6 mm (20 pcs) |
1 x | Propeller AERO-NAUT M4 73 mm (7 Blades pr) (Right hydropropeller |
1 x | Outboard Aqua-Race 60 |
1 x | 25 mm fenders (10 pcs) |
1 x | Motor Johnson 650 with L base and reducer 1,94:1 |
1 x | Davit 70 mm (2 pcs) |
1 x | Eje barco 450x4 mm M4 |
1 x | Metal gratings 26x11 mm (20 pcs) |
1 x | Propeller RABOESCH M5 130 mm (4 Blades) (Right hydropropeller) |
1 x | Cleat 15 mm (2 pcs) |
1 x | Propeller RABOESCH M5 0 mm (4 Blades) (Right hydropropeller) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Futaba 38 mm servo arm with ball link |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Vertical mounting servo holder |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
2 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | 45 mm rods set for direction control |
2 x | Straightened threaded rod M2-1m |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Blind nut M3 (4 pcs) |
1 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Nut for mounting M6 (4 pcs) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Motor OS 3820-1200 electric |
1 x | Nut for mounting M3 (10 pcs) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
1 x | Propeller AERO-NAUT M4 65 mm (6 Blades pr) (Right hydropropeller |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller) |
1 x | Propeller 3BL 30 mm M4 plastic Right |
1 x | Rubber boat defense |
1 x | Propeller RABOESCH M4 70 mm (5 Blades) (Right hydropropeller) |
1 x | Transom 59x46 mm |
1 x | Propeller RABOESCH M4 70 mm (5 Blades) (Right) |
1 x | Picas 12 mm (20 pcs) |
1 x | 290 mm M4/4 mm Prop shaft |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Left) |
1 x | Cornamusa 8 mm plastico (10 pcs) |
1 x | Rudder 107-06 |
1 x | Outboard Aqua-Race 50 |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller) |
1 x | Propeller 3BL 30 mm M4 plastic Left |
1 x | Mounting single stop Ms 10 mm |
1 x | Spare Shaft Ø4mm L:450x18mm M4 |
1 x | Noray doble 7 mm (2 pcs) |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller) |
1 x | Reed valve for DA 50-R |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Futaba 46 mm servo arm with ball link |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | Keypad ALTIS V4 |
1 x | Futaba 52 mm servo arm |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Pushrod octagone 4/3 |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Lock nut M6 (10 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | XICOY X45 rail |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Nut for mounting M3 (4 pcs) |
1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Nut for mounting M4 (4 pcs) |
1 x | Nut for mounting M5 (4 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | 5 mm M2 variable horn |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller) |
1 x | Pile railing 2D/30 mm (10 pcs) |
1 x | Pilotes planos 24mm (20 pcs) |
1 x | Metal hook for loading arm, 9mm high, 10 pcs |
1 x | Marco de medición doble 35 mm (2 pcs) |
1 x | Escalera gris 5 mm (L 60mm) |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | 290 mm M5 Prop shaft |
1 x | Propeller AERO-NAUT M4 70 mm (6 Blades pr) (Right hydropropeller |
1 x | Propeller RABOESCH M4 45 mm (4 Blades) (Right hydropropeller) |
1 x | Pile railing 2D/48 mm (10 pcs) |
1 x | Spare Shaft Ø4mm L:450x23mm M4 |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller) |
1 x | Propeller RABOESCH M5 130 mm (4 Blades) (Left hydropropeller) |
1 x | Propeller RABOESCH M4 60 mm (4 Blades) (Right hydropropeller) |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Left hydropropeller) |
1 x | Propeller 3BL 35 mm M4 plastic Left |
1 x | Ojos de buey 5 mm (10 pcs) |
1 x | Propeller RABOESCH M4 50 mm (3 Blades pr) (Left hydropropeller) |
1 x | 10 mm dogdrive props |
1 x | Furling sail Ms.10mm (5pcs) |
1 x | Propeller RABOESCH M4 45 mm (4 Blades) (Left hydropropeller) |
1 x | Propeller RABOESCH M5 130 mm (4 Blades) (Left hydropropeller) |
1 x | Pile railing 2D/35 mm (10 pcs) |
1 x | Propeller AERO-NAUT M4 50 mm (3 Blades pr) (Right hydropropeller |
1 x | 290x4 mm M4 shaft ship |
1 x | Cleat 10 mm (2 pcs) |
1 x | Mounting base Ms 12 mm |
1 x | Offshore-Schleppwinde Bs |
1 x | Doppelpoller 7 mm plastic (10 uds) |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Propeller AERO-NAUT M4 60 mm (3 Blades pr) (Right hydropropeller |
1 x | Noray 48 mm (5 pcs) |
1 x | Molinete / Cabestrante amarre Scale 1:32 |
1 x | Spare Shaft Ø6mm L:450mm M5 |
1 x | 270 mm 3/3 mm shaft ship |
1 x | Low line 74 mm |
1 x | Propeller RABOESCH M4 50 mm (3 Blades pr) (Right hydropropeller) |
1 x | Propeller Ms 65L (left propeller) |
1 x | 38 mm fenders (10 pcs) |
1 x | Noray doble 9 mm (2 pcs) |
1 x | Propeller AERO-NAUT M4 45 mm (3 Blades pr) (Left hydropropeller |
1 x | Propeller AERONAUT M4 50 mm (3 Blades pr) (Left hydropropeller) |
1 x | Mahagoni 1.0x100x1000 mm |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | MG cannon 1.8 cm (5 pcs) |
1 x | Propeller 3BL 50 mm M4 Plastic |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller) |
1 x | Compass Ø 15 mm (20 pcs) |
1 x | Transom 40 mm |
1 x | Propeller RABOESCH M4 65 mm (4 Blades) (Right hydropropeller) |
1 x | Propeller Helice 4BL 70 mm M4 plastico Dcha |
1 x | Propeller Ms 65R (rigth propeller) |
1 x | Propeller AERO-NAUT M5 0 mm (4 Blades) (Left hydropropeller) |
1 x | Propeller RABOESCH M5 100 mm (4 Blades) (Left hydropropeller) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Piston ring for DA-50R and DA-100 |
1 x | Miniature brass strap hinge, 1 m |
1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Carburetor for ZG45SL and ZG62/S/SL |
1 x | Cylinder ZG 26SC/SLH |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Spring Clip Ø25 mm |
1 x | Covered closure or fairings |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | 8 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | 29,0 mm propeller (left propeller) |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | 140 mm rods set for direction control |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Adapter rotula M3 |
1 x | XTorque CFK Servohebel 38 |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Gates hinge |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | XTorque CFK Servohebel 38 HITEC 25T |
|
29,535.61EUR |