Top » Catalog » Hardware » Power supply system/Data Recordi » Emcotec » EMCA15055

149.95EUR

DPSI Ampere & Voltage bundle
[EMCA15055]


DPSI Ampere & Voltage bundle

Product description
DPSI Ampere - Produktbeschreibung
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere & Voltage bundle can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models.
System stability of the DPSI Ampere & Voltage bundle is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery.
The DPSI Ampere & Voltage bundle is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.
The DPSI Ampere & Voltage bundle can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.
The DPSI Ampere & Voltage bundle is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere & Voltage bundle.
Function overview
Loss-free switching function without diodes.
Integrated electronically fail-proof switches separately for each battery without using the micro controller (CSHC).
Dual safeguarded power off logic. Even a failing part does not lead to a power out.
IVM (Intelligent Voltage Monitoring). Battery voltage monitoring with acoustic warning signals for all supported battery types (NiMH, LiIon, LiPo, LiFePO4).
Booster for safe control of the power switches even at extremely low voltages or short power interruptions (MBOOST).
DPSI Voltage - Product description
Voltage regulator module for battery backer DPSI Ampere.
The module must be plugged to the output side of the DPSI Ampere. With a jumper regulated output voltages of 6 volts, 6.6 volts or 7.2 volts can be selected. Furthermore the unregulated battery voltage can be used additionally on a secound output.
Delivery includes dual power supply DPSI Ampere, voltage regulator DPSI Voltage, programming jumper, switching magnet with EMCOTEC patch as well as German and English operating instructions.


under request
under request

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
Controlador tren/frenos ER-150 V2
Controlador tren/frenos ER-150 V2
55.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
2 x Spray Graphit 33
1 x Spray adhesive INFUTAC (Clear) 500 ml
2 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Plasti Dip Liquid Tape 429 ml black
2 x Partall paste 650 g
1 x Nitroverdu 500 ml
3 x Painting GHT Lexan Black 150 ml
2 x 1000 ml sealer (DOPE)
2 x Universal Colour Paste deep black 50 g
1 x Turbina KINGTECH K320 G5
2 x Solvent Plasti Dip 1000 ml
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
2 x Universal Colour Paste white 50 g
1 x Adaptadores carga 6s JST-XH
3 x Spray EC Red 400ml
2 x Plasti Dip Liquid Tape 429 ml orange
3 x Hobbylite Filler, Balsa colour
1 x Plasti Dip Liquid Tape 429 ml black
2 x Spray adhesive AEROFIX 2
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Crimping tool
1 x Conector MR-60 (pareja)
2 x PARTALL® Hi-Temp Wax, 340 g
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Paint gun for sprays
2 x Adapter lead MPX/EC3
1 x BEC 3A FOXY
2 x Circlick securite
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Futaba External voltage input cable Futaba CA-RVIN-700
3 x TP/TopFuel - XH 2/3S Adapter
2 x MPX-Dean "T" Adapter
2 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Cabel charger transmitter GRAUPNER
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x 5 LiPo XH>EH adapter
3 x 30 cm BEC cable (female)
2 x 30 cm BEC cable (male)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
3 x 3 LiPo XH>EH adapter
2 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Bungee HLG Premium
1 x Vasa model Catapult
1 x Cable S.BUS 3 salidas 100 mm
1 x Futaba male 40 cm extension
2 x Extension silicon 30 cm female (Graupner)
1 x Futaba Female 40 cm extension
2 x Extension 30 cm (Futaba)
1 x Extension silicon 30 cm male (Futaba)
1 x Sanyo TX Battery Eneloop 9,6 V Hitec
1 x Sanyo RX Battery Eneloop 4,8 V JR
2 x Extension 15 cm (Futaba)
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Sanyo RX Battery Eneloop 6,0 V JR
1 x Sanyo Eneloop AAA 1,2 V battery 800 mAh
2 x Sanyo RX Battery Eneloop 4,8 V JR
1 x Bateria LRP 2200-7.2v 6 cell NiMH
1 x Cabel "Y" 30 cm (graupner)
1 x Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x Extension silicon 100 cm (Graupner)
1 x Extension 7.5 cm
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Prolongador S-Bus JR/JR 10cm
1 x Cable S.BUS 3 salidas 300 mm
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Conector JR Servo male (10 pcs)
1 x Extension MPX-MPX 20 cm
1 x TopFuel LiPo 25C-ECO-X 900mAh 2S
1 x TopFuel LiPo 20C-ECO-X 4500mAh 3S
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
2 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
3 x Presto SF Light Filler styrene-free (420 g)
1 x EASYGLIDER 4 RR
1 x HOPPER tank Digitech 250 ml (Festo nipples 6 mm)
1 x OS 40-FG 4T Motor
1 x Tube support Ø 6mm (10 pcs)
1 x LOWER TOW HOOK
1 x Chili Race F3K 2 wing servo mounted(carbon biax)
1 x Support Flush MPX Conector (6 pcs)
1 x HERON RR
1 x Rotorshape Autogyro
1 x Cabel "Y" 30 cm (Futaba)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Piñon motor rotor LA-500
2 x Rotor Mast
1 x Fuselage Autogyro RAINBOW
1 x Washer 2.2×4
1 x LA500 pre-rotation gear
1 x Extension silicon 35 cm male (Futaba)
1 x Head upper part
1 x Blade holder upper
1 x Head lower part
1 x Blade holder lower
1 x Blades 330mm
1 x Female connector for 16 pines AWG
2 x Male connector JST SH 1.0mm with 10 cm wire
2 x TrainerCord (master-learner)
2 x Socket head ball link M3 (2 uds)
2 x Blue metalic ball link M3/3 azul (2 pcs)
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x M2,5 Diam metal ball link V3 (2 pcs)
2 x Ball link M1.6 (6 uds)
1 x 2 LiPo XH>EH adapter
1 x DPS Switch JR/JR
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Pins M connect Multipin connectors AWG 20-24
1 x CC 05
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x SBEC 30 D
1 x Male connector for 20 pines AWG
2 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Male connector for 12 pines AWG
2 x Extension 2/3 lipos JST - JST/C
1 x EWC3 100 cm wing connector
3 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x SWTU2 switch
1 x USB HLS prog. interface
1 x Male Prolonger TP 4/5S
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x SBEC Jeti
1 x EWC3 40 cm wing connector
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Kwik link AL M3 con Clip (2 pcs)
2 x Ball link M2,5 (10 pcs)
2 x Blue metalic ball link M2/2 azul (2 pcs)
2 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
2 x Ball link M2 (10 pcs)
2 x Long ball link M1.6 (6 uds)
2 x M2,5 5Diam short black ball link V2 (2 pcs)
2 x Socket head long ball link M3 (6 uds)
1 x M3 Maxi ball link (2 uds)
2 x Ball link M3 (10 pcs, flat ball)
2 x M2 5Diam short black ball link V2 (2 pcs)
1 x Female connector for 10 pines AWG
1 x Extension 5 lipos JST/C - JST
1 x SPS Remote switch actuator
1 x Male connector for 16 pines AWG
1 x Connector Sub-D 2+5 Female
1 x JETImodel SINGLE BEC
1 x Female connector for 12 pines AWG
1 x CC 02
1 x wing/fuselage connector for 3 pines AWG 20-24
2 x Short Switch On/Off micro
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x Female connector for 6 pines AWG
1 x Male connector for 10 pines AWG
1 x Extension 2/3 lipos JST/C
2 x Electronic switch JETI SP06 Opto
1 x Extension 6 lipos XH > EH
1 x T-Motor U7-V2.0 Kv420
1 x DIVA cabin cruiser
1 x Coupling bush 5 - 5 mm
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Rigid coupling brass Ø 2 mm L: 15 mm
1 x Bandera Frankr 4x6
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Motor A10-7 L 4,4:1
2 x 20 g tin paste
1 x PYRO 600-12
1 x KIRA 500-26 6,7:1
1 x KONDOR 15-92
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x PYRO 800-40 Long Axi
1 x SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
2 x Sukhoi 29S 2,6 m White/Blue (SebART)
2 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Ball Link ALU M3 - RH (1 pcs)
3 x Axle for motor A50-L
2 x Shaft for A60-L (140mm)
2 x Motor A60-6XS V4 28-pole kv370
1 x Motor B40-10 L
2 x Motor B20-10 L + 4:1 gearbox
2 x Motor A60-5XS V4 28-pole kv420
1 x Motor A30-10 XL V4
1 x Universal Colour Paste deep black 250 g
1 x Spannlack 1000 ml
1 x 
1 x Combo RAY C3542-1000 + ESC 60A
1 x Release wax 250ml
1 x 500 ml sealer (DOPE)
1 x Combo FOXY C3530-700 + FOXY 80 amp
1 x 20x1000 mm Ring Strap Back To Back
1 x KIRA 600-20 6,7:1
1 x PYRO 900-52L
1 x KIRA 500-36 6,7:1
1 x KIRA 480-31 5,2:1
1 x KIRA 600-38 6,7:1
1 x KIRA 480-34 5,2:1
1 x PYRO 700-56L
1 x PYRO 800-48 Long Axi
1 x PYRO 700-45
1 x KIRA 600-17
1 x KIRA 600-24 6,7:1
1 x KIRA FAI 5F5/4s
2 x KIRA 600-30 6,7:1
1 x KIRA 600-16
1 x KIRA 400-34
1 x KIRA 600-20
1 x PYRO 650-53L EJE LARGO
1 x KIRA 480-38 5,2:1
1 x DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV)
1 x DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x PYRO 650-103 Long Axi
1 x PYRO 700-45 Long Axi
1 x KIRA 500-30 6,7:1
1 x KIRA 400-27
1 x PYRO 750-50L
1 x KIRA 480-43 5,2:1
1 x KIRA 480-34
1 x PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x SLICK 360-A 104" (2640 mm)
1 x EDGE 540-A 105" (2660 mm)
1 x EDGE 540-A 91" (2310 mm)
1 x Screws flush mount M2
1 x Screws M1,6x6 Allen
1 x Raer wall
1 x Rudder
1 x Tail tube RAINBOW
1 x Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x Blade holder center
1 x Rotorhead pushrod
1 x Blade holder center GFK 0,5 mm
1 x Battery plate
1 x Ball joint long
1 x Wheel keeper washer
1 x Motor wall
1 x Baering 3x8x4
1 x APM2.6 Power module with 5.3V DC BEC
1 x MAX BEC 2
1 x Opto Gas Engine Kill Switch
1 x Male connector for 6 pines AWG
1 x DPSI magnetic switch actuator (housing)
1 x SPARK Switch 5.9v
1 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x Short ball link M1.6 (6 uds)
1 x Socket head ball link M3 (2 uds)
1 x Steering lever
1 x Crystal Universal RX 35.150 Ch 75
1 x Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts)
1 x 9x4.7 * 22x12 carbon propeller
1 x Crystal RX 35.120 Ch 72
1 x LA500 housing-upper cyclic
1 x JETImodel Addcap 1640
1 x Electronic switch JETI SP6 0-15v/6A
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x CC 03
1 x Double conector with JR adapter and 200 mm extension
1 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x Switching module high voltage SXH
1 x Magnetic Interruptor MULTIPLEX
1 x Switc electronic 30 Amp
1 x Long ball link M2 (6 uds)
1 x Ball link M3 RPA's-UAV's
1 x Joint with bearing M2 22x5,5
1 x M3/5 Diam metal short ball link V3 (2 pcs)
1 x Joint with bearing M3 22x5,5
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x Short ball link M2 (6 uds)
1 x Antenna holder bracket double
1 x Joint with bearing M2,5 22x5,5
1 x M3 INDUSTRIAL ball link (2 uds)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x M3 Maxi ball link (2 uds)
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x Socket head long ball link M3 (2 uds)
1 x Ball link M3 (6 uds)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Propadapter for motor A50
1 x Battery charging cable XT60
1 x Fan for A60
1 x Propeller MENZ-S 16x8
1 x Propeller MENZ-S 16x10
1 x Propeller MENZ-S 17x10
2 x Spare Shaft Ø6mm L:450mm M5
2 x Motor A20-6 XL 10-Pole EVO + 4,4:1
2 x Eje barco 450x4 mm M4
1 x Transom 59x46 mm
2 x 290 mm 290 mm M5x18 mm shaft ship
2 x Motor A40-10S V4 14-Pole
2 x Escalera gris 5 mm (L 60mm)
2 x Cleat 10 mm (2 pcs)
1 x Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x 290 mm M4 7/8x212 mm shaft ship
1 x SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x ULTRA STICK 30 cc ARF
1 x EDGE 540 1.73m SEAGULL Model
1 x White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers
1 x Motor B20-18 L + 4:1 gearbox
2 x Motor A50-14L Turnado V3 Glider
1 x Shaft for A60-XS-V2 (112,5mm)
1 x Motor A30-14 M V2 6 Poles
1 x Cyano ULTRA - CURE™ (21g)
1 x Cyano SUPER - GOLD™ Pocket (18g)
1 x UHU hart 35 g
1 x CA Glue fast 20g
1 x GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
1 x KIRA 480-38
1 x Sukhoi 29S 2,6 m Yellow/Black (SebART)
1 x ARS 300 91" ARF 2311mm ORANGE
1 x USB interface ALTIS
1 x Propeller MENZ-S 20x6 Pusher
1 x Propeller MENZ-S 15x8
1 x Propeller MENZ-S 20x10
1 x Parachute XTRALITE S
1 x Furling sail Ms.10mm (5pcs)
1 x Optotronix X-Carrier
1 x A40-10S V2 8-Pole + 6,7:1 PG
1 x Escalera gris 7 mm (L 60mm)
1 x Doppelpoller 17 mm (6 uds)
1 x Emcotec SPS Magnetic Switch Actuator
1 x DPSI Micro MPS
1 x DPSI Micro - RCS
1 x 290 mm 8x4 M4 shaft ship
1 x Spare Shaft Ø4mm L:450x23mm M4
1 x DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x Cable coupler M2,5 (2 pcs)
1 x Motor A20-26 M EVO
1 x Rudder 107-06
1 x Motor A30-14 L V4
1 x A50 Backmountset complete V3/V4
1 x DPSI RV Mini 6 Magic
1 x DPSI RV Mini 5 Magic
1 x Axle for motor A20-S (3 uds)
1 x Motor A40-10 L V2 14-Pole Glider
1 x A50 Backmountset complete
1 x DPSI Micro - RCS RV
1 x Spare Shaft Ø4mm L:450x18mm M4
1 x 290 mm M4/4 mm Prop shaft
1 x 261 mm M4/M4 6.0x4.0 mm shaft ship
1 x Bearings for motors hacker A50
1 x Cleat 20 mm (2 pcs)
1 x Motor A50-12 L Glider
43,422.06EUR
Manufacturers
Manufacturer Info
Emcotec
- Emcotec Homepage
- Other products
Notifications
NotificationsNotify me of updates to DPSI Ampere & Voltage bundle
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce