Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

VSpeak ECU converter KingTech
79.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Copier 2x20 cm pcs
2 x	Dust collector for mould cleaning
1 x	Hot Glue Stick GREEN
4 x	Screwdriver for Torx® TX8
1 x	Cut tube
1 x	Starter Sullivan-STAR 601
1 x	Crimping tool
2 x	Z Bender - S Type Tool
2 x	Starter 12v (Max 90 and 15ccm)
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
2 x	Hexagonal ball head 2.0 x 50 mm
1 x	Copier 5x20 cm pcs
1 x	Digital scale up to 40 kg
1 x	Digital precision scale up to 2000 g
2 x	Screwdriver for Hexagon 1,27mm
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Z Bender - S Type Tool
1 x	Ball Link Plier
1 x	2,5x60 mm allen screwdriver
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
2 x	Vacuum pump P1-N
1 x	2,0x50 mm allen screwdriver
1 x	Ball Link Plier
2 x	Vacuum pump 12 CFM
1 x	Starter Sullivan-STAR 603 DINATRON
2 x	Screwdriver for Torx® TX6
1 x	3,0x60 mm allen screwdriver
1 x	Crimping tool
1 x	Starter EM Gear Power 250
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
2 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
2 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Silent-blocks DLE 170M
1 x	Small Crow DLE-170M
2 x	Motor DLE 200cc Std
1 x	Motor DLE 170 M- Paramotors
1 x	Micro flex hinge (12 uds)
1 x	Extension silicon 10 cm (Futaba)
1 x	Premium servo extension 75cm
2 x	Futaba Female 40 cm extension
2 x	Gates hinge aluminium (1 pcs)
2 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Extension 100 cm (Futaba)
2 x	Premium servo extension 25cm
1 x	Cabel "Y" 30 cm (graupner)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Small pinned hinge (12 uds)
1 x	Flap hinge (6 pcs)
1 x	Premium servo extension 50cm
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Long pinned hinge (6 uds)
2 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Circlick securite
1 x	Extension 15 cm (Futaba)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
2 x	Futaba Female 40 cm extension
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Extension 90 cm (Futaba)
2 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Extension silicon 35 cm male (Futaba)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
2 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
2 x	Extension 30 cm (Futaba)
2 x	18 mm reinforced hinge
1 x	Extension silicon 30 cm female (Futaba)
1 x	15 mm reinforced hinge
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
3 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	200 mm extensión servo HITEC/JR
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Extension silicon 30 cm male (Graupner)
1 x	Extension PVC 150 cm (Graupner)
1 x	Extension 7.5 cm
1 x	Gates hinge
1 x	Miniature brass strap hinge, 1 m
2 x	25 mm reinforced hinge
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Extension silicon 30 cm female (Graupner)
2 x	Extension lead 15 cm Multiplex
1 x	Slave-cable USB Easy Sim
1 x	1/7 Pilot "Japanese"
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	Steel brush wheel with 2.35mm
1 x	Red aluminium servo arm V3-Futaba 1,5inch M3
1 x	Mini-handed clamp
1 x	Blades 330mm
1 x	Precision wrench L100 mm
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	Roller cutter 28 mm
2 x	Laminating brush 10 mm, pack/ 50 pcs
1 x	Propeller diller for DLE170
1 x	EC-Cutter
1 x	SERVO DES 806 Pignons
1 x	Aramid fibre shears Proton®, 21 cm / 8" length
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Soporte metal para servos
2 x	SERVO DES 707 BB MG
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Tube bender
2 x	Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
2 x	Screwdriver for Hexagon 1,5mm
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Starter EM Gear Power 80
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 5.0x4.0x156 mm
2 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
2 x	Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
3 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm)
1 x	Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
2 x	Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
2 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x	Short extra-strong control horn with bearing 2,8x15
1 x	Medium extra-strong control horn with bearing 2,8x24
1 x	Rudder forward 80x28 "type Kato"
1 x	Rudder forward 70x28 "type Kato"
1 x	Long adjustable control horn with bearing
1 x	Small control horn with bearing (2 pcs)
1 x	Indoor hinge with servo arm integraded
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Regulador NAVY 540R
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
2 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
2 x	ABS tube 2.0x1.0x1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x	CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x	ABS tube 16.0x14.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	ABS tube 3.0x2.0x330 mm
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Medium pin type hinge (12 uds)
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Socket head ball link M3 (2 uds)
2 x	Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x	A60-6XS V4 28-Pole
1 x	A60 Motor Mount Alu complete set
1 x	Axle for motor A30-XL V2
1 x	JETImodel Addcap 820
1 x	Propadapter for motor A60-V2
1 x	Rudder forward 90x28 "type Kato"
1 x	L-shaped servo mount
1 x	Horn F3A de Titanium 16 mm (2 units)
2 x	Servo GO-02 Digital 1.8g
1 x	Joint with bearing M2 22x5,5
2 x	Ball link M3 RPA's-UAV's
2 x	Ball link M1.6 (6 uds)
1 x	Long ball link M3 (6 uds)
1 x	Short ball link M3 (6 uds)
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	Servo TT ACE SHV 1504 MG
2 x	Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x	Fan for A60
1 x	Xoar Electric Beechwood Prop 20x10
1 x	Shaft for A60-XS-V2 (112,5mm)
2 x	Turbo light spinner cap white 32mm
1 x	TP/TopFuel - JST-EH 4/5S Adapter
2 x	DUPLEX 2.4EX RC Switch
1 x	A50 Motor Mount Alu complete set
2 x	Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
2 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x	Cable adapter iCharger
2 x	Battery charging cable XT60
1 x	FesEx-Uni8 System
2 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Propadapter for motor A50-V3
2 x	TP/TopFuel - XH 2/3S Adapter
1 x	Axle for motor A20-S (3 uds)
1 x	Propadapter for motor A50
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
2 x	FesEx-Uni6 System
1 x	Backmountset complete A40
1 x	JETImodel Addcap 1640
2 x	Shaft for A60-L (140mm)
1 x	EDF Stream-Fan 110mm kv780
1 x	Axle for motor A50-L
1 x	Axi for motor A40-L Motor 8-Pole-Electric Turbine
2 x	Z-shaped servo mount
1 x	Servo GO-1088MGW 74 kg.cm 0.125s/60º
1 x	Servo GO-1073MGW 32 kg.cm 0.135s/60º
1 x	Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x	Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x	Handle for PERMAGRIT lime
1 x	Mini Infrared Thermomiter
1 x	Propeller diller for DLE111 and DA85-150
1 x	Propeller drill jig DA 100/85/120/150/200 and VM 60-210
1 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x	21x14 Falcon electric carbon prop (64 g)
1 x
1 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	Servo SAVOX SV-1254 MG HiVolt Low Profile
1 x	Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 9.0x8.0x1000 mm
1 x	LO 100 ARC 3.3m
1 x	VPP system propeller for AXI VPP motors (spare)
1 x	Servoarm SH-81, two sides, aluminium
1 x	Servo SAVOX SV-1261 MG
1 x	SAVOX SH 1250 MG servo digi
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
1 x	ABS tube 7.0x6.0x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Ø 40 mm fiberglass motor-holder for electric motors
1 x	LO 100 ARC 3.3m,cabina
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	LO 100 ARC 3.3m,frame canopy
1 x	Socket head ball link M3 (2 uds)
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	Horn with ball 40x30
1 x	TopFuel LiPo 20C-ECO-X 4600mAh 5S Competition F3A 2017
1 x	TopFuel LiPo 20C-ECO-X 2400mAh 3S MTAG
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	SlowFlyer control horn (3 pcs)
1 x	TopFuel LiPo 25C-ECO-X 900mAh 2S
1 x	TopFuel LiPo 20C-ECO-X 5000mAh 5S MTAG
1 x	Reduction gear 2.8:1 for ZG 38 inline version
1 x	ZENOAH ZG 62 SL
1 x	Motor ROTO-85 FS NG 4T 2 cylinder Boxer
1 x	ExtraCA Top
1 x	Catalyst INSTA - SET™ (235g)
1 x	Extender tip (6 pcs)
1 x	Microbalon filler for CA glues. Packaging bottle 20g
1 x	SE Ring 480 mm (2 pcs)
1 x	PROFI Box JETI
1 x	ProgBOX MASTER Hacker
1 x	Para-RC Trike "RC-Bullix"
1 x	Shaft for A60-20/22/24S (120 mm)
1 x	Servo GO-1070MG 40 kg.cm 0.10s/60º
1 x	Servo arm with 6 mm hole to FEMA 9800A
1 x	Joint with bearing M3 22x5,5
1 x	Smoke Oil Blue 5 l
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	Joint with bearing M2,5 22x5,5
1 x	M3 Maxi ball link (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	LiPo TopFuel ECO-X 2400mAh 4s 35C MTAG
2 x	TopFuel LiPo 25C-ECO-X 1800mAh 3S
1 x	TopFuel LiPo 25C-ECO-X 1800mAh 2S
1 x	Xoar Electric Beechwood Prop 24x8
1 x	LiPo TopFuel ECO-X 5000 mAh 2s 35C MTAG
1 x	LiPo TopFuel ECO-X 5800mAh 2s 20C MTAG
1 x	RM-130FSI 4-stroke inline gasoline airplane 3 cylinder
1 x	ZG231cc SHL
1 x	Cyano SUPER - GOLD™ Pocket (18g)
1 x	Cyano INSTA - CURE+™ (56g)
1 x	Cyano INSTA - CURE™ (225g)
1 x	Cooler motor type 300
1 x	Cyano INSTA - FLEX+™ (25g)
1 x	Propeller 3x3
1 x	Motor B40-10 L
1 x	Motor A30-12 L V4
1 x	TopFuel LiPo 20C-ECO-X 4500mAh 3S
1 x	SERVO DES 658 BB MG
1 x	Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x	LiPo TopFuel Power-X 4000 mAh 2s 35C MTAG
1 x	TopFuel LiPo 20C-ECO-X 5800mAh 6S
1 x	Ball Bearing Oil 25 ml
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	M3/5 Diam metal short ball link V3 (2 pcs)
1 x	Ball link M2,5 (10 pcs)
1 x	Valvoline SynPower 2T, 1 Litre
1 x	Ball link M3 (10 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	TopFuel LiPo RX 25C-ECO-X 800mAh 2S
1 x	LiPo TopFuel ECO-X 2000mAh 2s RX
1 x	Horn 6/20 with M3 Bearing
1 x	TopFuel LiPo 20C-ECO-X 5000mAh 3S MTAG
1 x	LiPo TopFuel ECO-X 3000 mAh 2s 20C MTAG
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	TopFuel LiPo 20C-ECO-X 5000mAh 6S
1 x	Horn 6/35 with M3 Bearing
1 x	Small aluminium horn gold (2pcs)
1 x	TopFuel LiPo 35C-ECO-X 7500mAh 6S MTAG
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	LiPo TopFuel ECO-X 3800mAh 3s 20C MTAG
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x	6 mm aluminium horn with patella
1 x	Welder 100W/200V
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Cable control set

24,482.00EUR