1,349.00EUR

DJI FPV Combo
[DJIFPVCOMBO]


DJI FPV Drone Combo

Contenido del Packete
1 X DJI FPV Racing Drone
1 X DJI Control Remoto
1 X DJI FPV Goggles V2
8 X Hélices (4XCW 4XCCW)

DJI FPV: The road to amazing adventures in FPV flying is now open, for everyone.
Discover the true meaning of flying, taking to the skies with power, speed and... complete control.
Creating incredible FPV images has never been so accessible.

The most immersive flying experience
With First Person View (FPV) through DJI Goggles V2, you'll experience flying on a different level. You see in Real-Time where you are flying to.

FPV for EVERYONE: 3 different modes
Whether you're a seasoned FPV expert or a complete beginner, 3 different flight modes make the drone suitable for everyone and you'll fly with confidence right from the start.
S Mode: Dynamic mix between the freedom & speed of an FPV drone with simplified controls like familiar DJI drones.
N Mode: Ideal for the (absolute) beginner. Feels like a regular DJI drone.
M Mode: Go all the way, with no limits. The full FPV experience with adjustable parameters. Accelerate faster than sports cars and go from 0-100 in 2s and tear past at up to 140kph.
Videos with cinematic quality & smoothness
Video quality: up to 4K at 60 frames per second. Super Wide View Angle of up to 150°.
120 Mbps bit rate. 1080p up to 120 FPS.
RockSteady Stabilization: EIS technology for extremely stable images, no matter how aggressively you fly.
Images in up to 3840x2160
The world through the DJI Goggles with DJI OcuSync 3.0 video transmission.
The DJI Goggles (glasses) through which you see the live view, receives real-time images at 810p and 120fps, with a high bit rate of 50Mbps. Images are transmitted to the goggles within 28 milliseconds (ms), up to a maximum distance of 10KM!
Small mistake? A moment of panic? No need to panic. The Emergancy Brake and Hover button is your wingman.
With one push of the button, the DJI FPV brakes and hovers in place. No matter which controller or flight mode you use, this button is always available.
Advanced safety features
Rest assured, with Smart Return To Home you can put the drone back down where it took off at the push of a button, fully automatically. (Also Low Battery RTH). Forward and downward sensors detect obstacles, and a downward facing light and colour-adjustable LEDs on the arms keep your drone visible in all conditions.
DJI Motion Control: the new way to control your aircraft
With the optional DJI Motion Control, you can control this drone with simple hand movements, in a natural way. This is not only super innovative, but simply a whole new way of flying. The standard controller enjoys a dynamic design, specially created for FPV.
Easily replaceable parts
Up to 20-min battery life
DJI Fly App
Aerobertics.be is official DJI dealer. The best support & service guaranteed. For all your questions, feel free to contact us or visit our 800m² shop in Bruges, with DJI Showroom or order now in our convenient webshop.
FEATURES
Drone:
Take Off Weight: ca. 795g
Dimensions: 255×312×127 mm (with propellers) / 178×232×127 mm (without propellers)
Diagonal Distance: 245 mm
Max Wind Resistance: 39-49kph

Goggles:
Weight: 420g all included
Dimensions: 184×122×110 mm (antennas excluded) / 202×126×110 mm
(antennas included)
Screen Size: 2-inches (×2)
Screen Refresh Rate: 144 Hz


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Swashplate metal LAMA
2 x Blade holder metal LAMA
1 x Carbon blade 3D 230 mm
1 x Shaft sleeve LAMA
1 x Coversion set HIROBO EX/EAGLE elektro
2 x Carbon blade 230 mm
1 x T-shape holder metal LAMA
1 x Silent-blocks DLE 170M
1 x Nose OPTIMA 2.200 mm (Elec or Glider)
1 x Partall paste 650 g
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Hobbylite Filler, Balsa colour
1 x Motor mount EDGE 540 48"
1 x Towing hook
1 x Circlick securite
1 x Extension silicon 35 cm male (Futaba)
2 x Prolongador S-Bus JR/JR 20cm
2 x Premium servo extension 50cm
1 x Cabel "Y" 30 cm (graupner)
2 x Premium servo extension 75cm
2 x 200 mm extensión servo HITEC/JR
2 x Extension lead 15 cm Multiplex
2 x Extension silicon 30 cm female (Futaba)
2 x Motor mount VANQUIST 48" F3A
1 x Motor brushless 1806 - 2300 Kv Cuadracopter
1 x DYMOND VTX UBS Programming adapter
1 x FA27.2×8.9 Prop-2PCS/PAIR
1 x ESC XREG 60 Amp 2-6 LiPo BEC 5V/3A
1 x DJI FPV Combo
1 x 
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Spinner fixed propeller 42 mm / 5,0 mm
1 x XPower H PROP HUB Ø6.0/42.5mm 0º
1 x Aluminum Fold Prop Spinner 34 mm / 3 mm
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Nose leg 155 mm with wheels 70 mm
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x PVC 0,08 qmm Graupner servos wire (5 m)
1 x ER40 Front Leg (with wheel 80mm)
1 x Retract/Brake Cable
1 x Extension silicon 100 cm (Graupner)
1 x Extension silicon 100 cm (Futaba)
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Kit hydraulic brake
2 x Extension silicon 50 cm (Graupner)
1 x Extension silicon 30 cm female (Graupner)
1 x 2 piece mounting frame
1 x Crimping tool
1 x 2 piece mounting frame
1 x 270 mm 3/3 mm shaft ship
1 x BALSA trip 3.0x5.0x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x BALSA triangular 6x6x1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x 30 mm Alu spinner 3 mm pleg. propeller
1 x V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x Metalic nose for PROJETI
1 x Spinner Alumin. propeller pleg. 30 mm / 3,2 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
1 x Black silicone 0,25 mm² wire (25 m)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Cable Cargador FUTABA
1 x Cabel charger transmitter GRAUPNER
1 x Electric Landing Gear ASPIRE (Elektron Retracts)
1 x RB-45 Electronic
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x Silicone 0,35 qmm servos cable Futaba (5 m)
1 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
1 x PVC 0,14 qmm servos wire Graupner (100 m)
1 x 30 cm BEC cable (male)
1 x 5 LiPo XH>EH adapter
1 x JR silicone servo wire 0,35 qmm / 5m
1 x 30 cm BEC cable (female)
1 x PVC 0,35 qmm servos wire Graupner (100 m)
1 x GS-200 Electronic
1 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x ER-40eVo Set B [Complet Set + GS200]
1 x White silicone 0,25 mm² wire (25 m)
1 x White silicone 0,25 qmm wire (100 m)
1 x ER-40eVo Set A [2x ER40 + RB-45]
1 x Brake disc Electron Retracts
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x 2 LiPo XH>EH adapter
1 x Manual Controller
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x RS-200 Touch Programmer
1 x ER-50eVo Set A [2x ER50 + RB-45]
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Retract Landing gear ER40 Combo Custom complete
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x Electric Landing Gear ODYSSEY +GS200 (Elektron Retracts)
1 x E_brakes electronics
1 x Silicone red 0,25 mm² wire (25 m)
1 x 4 LiPo XH>EH adapter
1 x White silicone 0,25 qmm wire (150 m)
1 x Electromagnets brake
2 x Extension silicon 75 cm (Futaba)
1 x Extension 100 cm (Futaba)
1 x Extension 90 cm (Futaba)
1 x Prolongador S-Bus JR/JR 10cm
2 x Extension silicon 50 cm (Futaba)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Extension 7.5 cm
1 x Extension 30 cm (Futaba)
1 x Futaba male 40 cm extension
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
2 x Extension silicon 25 cm (Futaba)
1 x Extension 15 cm (Futaba)
1 x Extension silicon 25 cm (Graupner)
1 x Premium servo extension 100cm
2 x Extension silicon 75 cm (Graupner)
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Extension PVC 150 cm (Graupner)
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Extension silicon 10 cm (Graupner)
1 x Premium servo extension 25cm
1 x Extension silicon 10 cm (Futaba)
1 x Futaba Female 40 cm extension
1 x Extension silicon 30 cm male (Futaba)
1 x Futaba Female 40 cm extension
1 x BlueCom™ Adapter (iOS)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x External LED's (2 pcs)
1 x 50m servo "Premium" wire (white/red/blue)
1 x 30 cm DEANS female connector
1 x Conector JR Servo male (10 pcs)
1 x 2 piece mounting frame Battery 3200 / 4000
1 x Extension for SensorSwitch 30cm
1 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x Extension for LC-Display 50cm
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x 5 line servos wire black (1 m)
1 x Conector JR Servo male (50 pcs)
1 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Dean "T" - Futaba Adapter
1 x Adapter lead MPX/XT60
1 x Charging Extension 50cm for 2 Battery
1 x 10m servo "Premium" wire (white/red/blue)
1 x ABS tube 10.0x8.0x1000 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x 290 mm M5 Prop shaft
1 x ABS I Strip 20x10x1000 mm
1 x T-Motor U7-V2.0 Kv420
1 x Coupling for 3,2 mm axis
11,231.81EUR
Manufacturers
Manufacturer Info
DJI
Other products
Languages
Español English
Currencies