1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x USB Mini Camera endoscope
2 x Hovercraft sailcloth
2 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Screw-lock connector M2 (2 uds)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
2 x Cap closure 33/23.5mm (2 uds)
1 x Canopy Latch
1 x SUS wire 3m (nylon coated)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Covered closure or fairings
2 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
2 x Windsock Ozone L - 700 mm
1 x Opale Rucksack
1 x MAX pilot ARTF
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Ballast 700gr OPALE
2 x Trike XL motor set (motor+esc+prop)
1 x Wing OXY 0,5 pulgadas2
1 x Para-RC Trike "RC-Bullix"
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Parachute PV6 for F3J
1 x Paramotor BackPack XXS 2
2 x Parachute BACKUP X100
1 x Paramotor BackPack XXS (without accessories)
2 x Aramid 50 daN 50 m
1 x Tape GFK 50 mm
1 x 800TVL CMOS camera for FPV
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Spray YELLOW Inca Lexan 150ml
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x DPSI RV Mini 6 Magic with Gas-Cap switch
1 x GPS Expander Module
1 x GPS Logger Dymond
1 x Locking cable tie 4.6x203 (uds)
1 x PowerBox DigiSwitch V2 JR/JR
1 x Steering arm 16 mm Ø 4 mm
1 x PowerBox iGyro SRS + GPS Modul
1 x Battlife Guard 2s
1 x PowerBox MERCURY SR2
1 x Extension for LC-Display 50cm
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x OLED-Display for PowerBox Mercury SRS
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Actuador lineal HLS12-100210-7.4v
1 x Power Box GPS Sensor III
1 x PowerBox Cockpit SRS (incl. SensorSwitch)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x GPS Sensor + Logger OPTronics
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x PowerBox iGyro SRS
1 x 2 piece mounting frame Battery 3200 / 4000
1 x PowerBox iGyro SAT
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Aluminium alloy coupler for carbon tube 6/M4
2 x 
1 x PowerBox Evo
2 x Servo NARO Max Std
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x MPX-Dean "T" Adapter
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x TrainerCord (master-learner)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Sparkplug 1/4-32
1 x Strip 3,5x1,75x330 mm
2 x Steering lever
1 x CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
1 x TRAINER RC Pilot V2 90" w/r ARF
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Cessna SKYLANE T182 1.75m - Seagull Model
3 x Blades 330mm
2 x Raer wall
1 x Bearing 3x6x2,5
1 x Nut M1,6
1 x Blade holder lower
1 x Ball joint long
1 x Head core bushing
1 x Complet landing gear
3 x Cierva C30 simulated motor
1 x Head upper part
2 x Screws flush mount M2
1 x Head spacer
1 x Cierva C30 Elevator
2 x Screw M3x16
1 x Cierva C30 spanish decoration Stickers
1 x Blade holder center
1 x SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models)
1 x Fuselage Autogyro RAINBOW
1 x BOOMERANG II 40/46 ARF 1.55mm
1 x BULLIT Wing 840 mm
2 x SkyMaxx 1.550 mm (kit)
1 x 3 blades set
1 x DOMINO 46-55 Trainer 1583 mm
1 x Blade Holder Full (4 blades)
1 x PC-6 Pilatus Porter Big "Tiger" (PICHLER)
2 x Tail tube RAINBOW
1 x PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x Blade Holder (3 blades)
1 x EDGE 540-A 105" (2660 mm)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x FESTO Filter 6 mm
1 x Propeller POWER-PROP 11x9
1 x Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x Rudder 2_Tray 4.5~5 inch
2 x Blade holder upper
1 x Aluminium wide washer M4 Red (4 pcs)
2 x 
1 x Racor 2/3 mm
1 x Quick hose connector 6-6 mm
1 x Festo Adaptor Tygon Large/4mm
1 x T-Hose connector 3-3-3 mm
1 x FESTO connector M5 Quick 6 mm
1 x Conector FESTO G1/8 Quick 4mm 90º
1 x FESTO connector M7 barb fitting XL Tygon
1 x FESTO connector M7 Quick 6 mm
1 x Racor "Y" 3 mm
1 x Y-Hose connector 4mm
1 x FESTO connector 1/8 Quick 6mm 90º
1 x T-Hose connector 3-3-3 mm
1 x Racor 3/3 mm
1 x Y-Hose connector 3-3-3 mm
1 x FESTO connector M5 Quick 4 mm
1 x Y-Hose connector 4-4-4mm
1 x Faucet FESTO
1 x Quick hose connector 6-6 mm
1 x FESTO connector M7 Quick 6mm 90º
1 x FESTO connector M7 barb fitting 4mm
1 x Quick hose connector 3-3 mm
1 x Y-Hose connector 6-6-6 mm
1 x T-Hose connector 2-2-2 mm
1 x Tap FESTO 6-6 mm
1 x Propeller electric carbon 9.5x6
1 x Propeller POWER-PROP 12x9
2 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
2 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x Buy Perforated film 100 cm / 10 m
1 x Buy Perforated film 100 cm / 50 m
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x CA Glue (medium) 20g
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Head lower part
1 x Buy Perforated film 145 cm / 50 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Buy Perforated film 100 cm / 20 m
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Nut M2 securing
19,526.95EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies