1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Flap hinge 33x9 mm (6 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x 15 mm reinforced hinge
1 x L-Connector 1.5 mm x 1000 mm
1 x Red smoke canister 65 g
1 x ABS angle 2,0x2,0x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x 3 LiPo XH>EH adapter
1 x Cinta Goldfix 1m
1 x Cabel "Y" 15 cm
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x BALSA trip 8.0x8.0x1000 mm
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x 
2 x Cable Cargador FUTABA
1 x SE Ring 360 mm (2 pcs)
1 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Cockpit plastic closing
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Extension 15 cm (Futaba)
1 x Silicone red 0,25 mm² wire (25 m)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Beech dowels 10 mm x 1000 mm
1 x Prolongador S-Bus JR/JR 10cm
1 x Extension silicon 100 cm (Futaba)
1 x SE Ring 300 mm (2 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Starter Sullivan-STAR 601
2 x ABS Strip 1.0x5.0x1000 mm
1 x Aluminum Bayonet / strongal D25 mm / 1 m
2 x 1/7 Pilot "Japanese"
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
2 x Round Rod 3,0x1000 mm
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Ball Link Plier
1 x Strip 3,5x1,75x330 mm
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Digital scale up to 40 kg
1 x Piloto Jet "Green" 1/6 Scale
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Xplorer1 anemometro
1 x Quicklock washer 3 mm (10 pcs)
2 x Flat washer 3.2 mm (20 pcs)
2 x Xplorer4 anemometro
1 x M3 black washers (4 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x MAMBO 17
1 x SkyMaxx 1.550 mm (kit)
1 x Indoor Brushed motor kit
1 x Cooler motor type 300
1 x Motor holder for AC 28/7
1 x 
2 x Equipment set XL
2 x ASG 32 560 mm
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Micro flex hinge (12 uds)
1 x Flap hinge (6 pcs)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x EVP Unit for AXI2208/xx and 2212/xx
1 x A/C quality beech plywood 1520x750x4.0 mm
1 x Birch plywood plate 600x300x2.5 mm
1 x Protective Cover for wires Ø 3 mm 1000 mm
1 x Silicone red 4,0 qmm wire ( 1 m)
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x Jeti Box mini
1 x 1/4 Pilot "Mike"
1 x Round Rod 1,5x1000 mm
1 x Piloto Jet "Red" 1/6 Scale
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x 1/12 Pilot "Cougar"
1 x Silicone black 1,0 qmm wire ( 1 m)
1 x Silicone red 2,5 qmm wire ( 1 m)
1 x Balsa panel 2.0x100x1000 mm
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x Lite Plywood panel 600x300x2.0 mm
1 x Protective Cover for wires Ø 20 mm 1000 mm
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x Silicone red 1,0 qmm wire ( 1 m)
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Balsa panel 1.5x100x1000 mm
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Balsa panel 3.0x100x1000 mm
1 x Birch plywood plate 600x300x4.0 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x Birch plywood plate 600x300x2.0 mm
1 x Silicone red 0,75 qmm wire ( 1 m)
1 x Silicone black 0,5 qmm wire ( 1 m)
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x Protective Cover for wires Ø 10 mm 1000 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell
1 x A/C quality beech plywood 600x300x5.0 mm
1 x Balsa panel 1.0x100x1000 mm
1 x Fiberglass heat shield Ø 8 mm 1000 mm
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Lite Plywood panel 600x300x3.0 mm
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Birch plywood plate 600x300x4.0 mm
1 x Fiberglass heat shield Ø 6 mm 1000 mm
1 x Silicone black 0,75 qmm cable ( 1 m)
1 x Silicone black 1,5 qmm wire ( 1 m)
1 x Balsa panel 5.0x100x1000 mm
1 x quality beech plywood BIRCH 600x300x2.0 mm
1 x Silicone red 0,5 qmm wire ( 1 m)
1 x A/C quality beech plywood 600x300x1.5 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x 5 line servos wire black (1 m)
1 x Silicone black 4,0 qmm wire ( 1 m)
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x ProgBOX MASTER Hacker
1 x Hacker X-Pro USB interface V2
1 x Tarjeta programadora RAY G2
1 x Jeti Advance Pro Program Card
1 x Pilot "Anthony" (Slimline)
1 x Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x Round Rod 4,0x1000 mm
1 x 1/12 Pilot "Fighter"
1 x SU 29S 140 carbon landing gear
1 x ABS Strip 1.5x6.0x1000 mm
1 x Strip 1,5x1,5x330 mm
1 x Round Rod 2,5x1000 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Round Rod 1,0x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x Nose leg 155 mm with wheels 70 mm
1 x Metal ring front FEMA
2 x Xplorer3 anemometro
2 x Socket Screw M3x9 mm
1 x Screw M2.5x8 (10 pcs)
1 x Socket Head Screw M2x10
1 x Blind nut M6 (4 pcs)
1 x Pan head screw M2x16 PH
1 x Connectors banna gold 5,5 mm (M/F)
1 x Conector BEC male (10 pcs)
1 x XH female balance (3S) connector (2 pcs)
1 x Gold antispark 5,5 mm plug
1 x XH male balance (2S) connector (2 pcs)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x MPX Sub-D Adaptor
1 x Connectors DEANS (T)
1 x Gold antispark 4 mm plug
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x XH female balance (5S) connector (2 pcs)
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Connectors banna oro 3,5 mm (M/F)
1 x Connectors banna oro 2 mm (M/F)
1 x Circlik for shaft 3.2 mm (10 pcs)
1 x Screw M3x5 (10 pcs)
1 x Screw M3x12 (10 pcs)
1 x Spring pin Ø 1 x 6 mm (10 pcs)
1 x Screw M4x20 (10 pcs)
1 x Tapping Screw M2.9x13 (10 pcs)
1 x Screw M2.5x5 (10 pcs)
1 x Socket Screw M2x3 mm (4 pcs)
1 x 15 mm floating pad (30 pcs)
1 x Blind nut M5 (4 pcs)
1 x M2 5Diam short black ball link V2 (2 pcs)
1 x M3 INDUSTRIAL ball link (2 uds)
1 x Short ball link M2 (6 uds)
1 x Ø 28 mm fiberglass motor-holder for electric motors
1 x Oracover Black 10 m
1 x 19 mm 2:1 black termoretract tube
1 x PT 20x13 EL Propeller
1 x Pin hinge 34x16 mm (10 uds)
1 x Round flex hinge (12 uds)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Connectors banna oro 6,0 mm (M/F)
1 x Conector Servo female 4 pines
1 x Banna gold connector 2,5 mm (M/F)
1 x XH female balance (2S) connector (2 pcs)
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Connectors banna oro 4 mm (M/F)
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x 2 mm female connector (2 pcs) with safety connector
1 x 30 cm DEANS female connector
1 x Optotronix Aurora Plug
1 x Connector CAN 15
1 x XH male balance (5S) connector (2 pcs)
1 x Connectors DEANS 4 pins (1 pair)
1 x Connectors banna oro 3 mm (M/F)
1 x Conector BEC female (10 pcs)
1 x XH male balance (4S) connector (2 pcs)
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x Wing connector 8pin with pin strip, plug & socket
1 x XH female balance (4S) connector (2 pcs)
1 x XH male balance (3S) connector (2 pcs)
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x 2 mm male connector (2 pcs) with safety connector
1 x Connectors banna oro 8,0 mm (M/F)
1 x Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x AC-10 pre-rotacion with motor
1 x USB Charger 120-240V AC
1 x Cooler motor type 400
1 x Hot Glue Stick GREEN
1 x Radial heatsink for MPJ AC25/35-xx motor
1 x 6x4 tree blades propeller
1 x Propeller electric carbon 10x8
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Propeller electric carbon 8.5x7
1 x Dust collector for mould cleaning
1 x Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x Propeller electric carbon 7x7
1 x Crystal TX 35.180 Ch 78
1 x Propeller POWER-PROP 11x6
1 x POWER PEAK D7 EQ-BID 12V/230V-Duo Charger
1 x Aceite DELUXE turbine Jet Oil 1 litro
1 x Propeller POWER-PROP 10x6
1 x Size "L" motor holder for class 600
1 x Glases Flitemaster
1 x 
1 x SKY RC T400Q Charger 4x100w
1 x PT 22x10 EL Propeller
1 x PT 21x13 EL Propeller 3 Blade
1 x Combo KAVAN C3536-1250 + KAVANA R50SB +
1 x EasyFLY Addon
1 x SunCover 110/120/140 Class (SebART)
1 x Hopper UAT Sebar 400 ml
1 x Avanti S 2.3m Jet YELLOW/BLACK & retract (SebArt)
8,408.33EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies