1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Pegatinas números para marcar
1 x Adaptador MPX-XT60 10cm
1 x Cable "Y" equilibrador 6S, 2x JST-XH / 1x JST-EH
1 x APM2,6 Power module con BEC 5,3 V DC
1 x Cable "Y" equilibrador 7S, 2x JST-XH / 1x JST-EH
1 x BEC 3A FOXY
1 x Cable carga bateria transmisor Multiplex 2x0,5 qmm (50 cm)
1 x BEC Mini JETI
1 x Adaptador 3 LiPos XH>EH
1 x Adaptador TP/TopFuel - XH 2/3S
1 x Ballast 700gr OPALE
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Aramid 50 daN 50 m
1 x Alambre cobre esmaltado 3 hilos trenzados rojo/negro/cobre Ø0,2
2 x Acoplador para cable M4 (10 pcs)
1 x Acoplador Micro M2 Ø 0,8 mm (10 pcs)
1 x Acople ALU M2,5 Ø 4 (2 uds)
1 x Acople ALU M2,5 Ø 6 (2 uds)
2 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Acoplador "Z" Ø 1 (2 uds)
1 x Acople ALU M3 Ø 6 (2 uds)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Ball link M2 (10 pcs)
2 x Ball link latón BS M3 V1 (10 pcs)
1 x Acoplador Micro M2 Ø 1 mm (10 pcs)
1 x Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x Acople ALU M2,5 Ø 3 (2 uds)
2 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Acoplador "Z" Ø 2 (2 uds)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Crimping sleeves para cables de 1.1 mm (10 pcs)
1 x Acople ALU M3 Ø 4 (2 uds)
2 x Kwik link AL M3 con Clip (2 pcs)
1 x Ball link aluminio M3 V1 rojo (10 pcs)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Acople ALU M3 Ø 5 (2 uds)
1 x Horn corto de latón M2 para cable (2 pcs)
1 x Fibra carbono tela 160g/m2 127 cm x 1 m
1 x Cartucho de humo Rojo 140 g
1 x Bancada motor ZG45/62, Long: 72 mm
1 x Codo escape ZG20/ZG22/ZG23/ZG26
1 x Motor NGH GT-17
1 x Arillo pistón para motor DA-50R y DA-100
2 x Motor DLE 170 cc Twin
1 x Codo escape 90º ø 25 mm
1 x Junta cilindro para G230RC/G260RC
1 x Encendido DA-50R/DA-60/DA-85
1 x Bloque separador carburador DA-50R
1 x Arandela Del. DA-50R/60/70
1 x Codo DA-150 "normal" (2 uds)
1 x Junta cárter para ZG 74 / ZG 80
1 x Aguja de baja DA-50R / 100I
1 x Motor DLE 30 cc V2
1 x Motor NGH GF30
1 x Chaveta DA50/85/100/150/200
1 x Escape ZG-38/S/SC
1 x Cilindro DA-50R/100/100L
1 x Codo carburador ZG-38
1 x Bulon DA-50R/100
2 x Motor DLE 65 cc
1 x Encendido para ZG 20/26
2 x Arandela Del. DA-85/100/100L/120
1 x Escape ZG22, ZG23, ZG231SLH, G2D96-D
1 x Aceite DELUXE turbine Jet Oil 1 litro
1 x Switch electronico SXH HV
1 x Helice APC 13x10 Electric
1 x Helice APC 10x4.7 SF Pusher
1 x Helice APC 12x10 Electric
1 x Helice APC 12x6 SF
1 x Helice APC 10x10 Electric
2 x Tren retráctil neumático tripata (Jet Legend)
1 x Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x TX 250 mW especial GOPRO
1 x Acoplador M2,5 Ø 2 mm (10 pcs)
1 x Terminales riostras M2,5 (2 pcs)
1 x Ball link ALU M3/2 con rodamiento (1 pcs)
1 x Kwik link metálico M2 (10 uds)
1 x Ball link ALU M2/2 con rodamiento (1 pcs)
1 x Polea de bronce 12/2 (2 pcs)
1 x Polea de bronce 4/1,5 (2 pcs)
1 x Adaptador para motores de aviones y barcos de 7,5-35cc
1 x Perforador hélices para DA50, DLE55 rojo
1 x Adaptador para motor A50
1 x Caja de láminas para DA-60/70
1 x Escape con silenciador trasero para DA-120
1 x Codo carburador aluminio ZG 45 SL
1 x Junta cilindro para ZG 74B/ZG 80B
1 x Programador 5v SIO RS 232
1 x Juego laminas DA-100/150/150L/170
1 x Canister combo DLE 55 cc
1 x Encendido ROTO 25V
1 x Motor DLE 55 cc
1 x Caja laminas DA-100/150
1 x Motor DLE 130 cc
1 x Tornillo hélice DA85/100/120 y VM170/200/210
1 x Lámina para caja de láminas del carburador de DA 35/50R/100l
1 x Autoarranque DLE 85/111/120 (motor incluido)
1 x Prop hub for DA 150/200, old version
1 x Cartuchos de humo AX-3 blanco (10 pcs)
1 x Codo escape ZG45/65 "normal"
1 x Cartuchos de humo AX-60 rojo (5 pcs)
1 x Cargas cohete B4-0 (6 pcs)
1 x Tornillo largo M5 ZG45/62/74/80
1 x Junta carburador ZG-38/S/SC
1 x Trompeta ZG 74/80, DA85, VM170-240
1 x Soporte aluminio ZG23SL/H/M, ZG26SC/SCM, ZG231SLH
1 x Cilindro ZG-20
1 x Cilindro ZG-26SC/SLH
1 x Cartuchos de humo AX-60 blanco (5 pcs)
1 x DUPLEX 2,4EX Expander E2
1 x DUPLEX 2,4GHz MRPM-AC EX
1 x Condensador AddCAP 10AS
1 x Emisora JETI Duplex DC-16 II BLACK Multimode
1 x Helice APC 21x14 Electric
1 x Sistema de paso variable 3D Indoor
1 x Helice APC 7x4 Electric
1 x Helice APC 5.1x4.5 Electric
1 x Helice APC 6x4 Electric
1 x Helice APC 8x6 Electric Pusher
1 x Helice APC 8x6 SF
1 x Helice APC 9x4,5 Electric Pusher
1 x Stick DUPLEX con interruptor 2 posiciones para DC/DS
1 x DUPLEX 2,4 EX MUI150 Sensor
1 x Chaleco Hispano Aviación
1 x Helice APC 21x12 WE Electric
1 x Helice APC 15x7 Electric
1 x Helice APC 15x4 Electric
1 x Helice APC 26x15 Electric
1 x Helice APC 15x8 Electric
1 x Helice APC 17x8 Electric
1 x Helice APC 15x10 Electric
1 x Helice APC 16x10 Electric
1 x Helice APC 16x4 Electric Pusher
1 x Helice APC 17x12 Electric
1 x Helice APC 18x12 Electric
1 x Helice APC 14x8.5 Electric
1 x Helice APC 15x4 Electric Pusher
1 x Helice APC 20x15 Electric
1 x Helice APC 19x12 Electric
1 x Helice APC 18x8 Electric
1 x Helice APC 7x6 Electric
1 x Helice APC 5x3
1 x Helice APC 4.5x4.1
1 x Helice APC 5x5
1 x Helice APC 7x5 Electric
1 x Helice APC 9x4.7 SF Pusher
1 x Helice APC 5.5x4.5 Electric Pusher
1 x Helice APC 8x3,8 SF Electric Pusher
1 x Helice APC 9x6 Electric
1 x Helice APC 7x4 SF
1 x Helice APC 7x6 SF
1 x Helice APC 5.25x4.75
1 x Helice APC 8x8 Electric
1 x SERVO DES 588 BB MG
1 x Helice APC 7x5 SF
1 x Helice APC 27x13 Electric
1 x Helice APC 8x3.8 SF
1 x Helice APC 6x5.5 Electric
1 x Helice APC 5.5x4.5
1 x Servo NARO Max Std
1 x Helice APC 4.75x4.5
1 x Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x Helice APC 9x3.8 SF
1 x Helice APC 9x4.5 Electric
1 x Kwik link negro largo (10 pcs)
1 x Varilla mando roscada M2,5 (2 uds)
1 x Terminales de mando o arriostrado aluminio rojo M3, 4 mm (4 pcs)
1 x Sistema para cables con tensor (silver)
1 x Ball link Aluminio M3 (2 pcs)
1 x Pull-Pull set completo acero inox. 3 m (max 20 kg)
1 x Kwik link pequeño (10 pcs)
1 x Set clevis para pull-pull (TY13233 y TY13234)
1 x Gorra Jeti Negra
1 x Emisora FUTABA T26SZ + R7214SB
13,153.04EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas