1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
2 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Buy Perforated film 145 cm / 50 m
1 x ABS 500 x 400 x 2,0 mm (white)
1 x Carbon fibre sleeve 12k 170 mm x 5m
2 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x ABS 500 x 400 x 1,5 mm (white)
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
2 x ABS 500 x 400 x 1 mm (white)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Aluminium sheet 500x250x0,5mm
1 x Carbon fibre sandwich sheet 350x150x3 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Buy Perforated film 100 cm / 10 m
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
2 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x Glases Nimbus "Black"
3 x Glases Moritz
2 x Glases Ace
1 x Glases Nimbus
1 x Glases Aspen
1 x Optical RPM Sensor
1 x Glases Flitemaster
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Presto SF Light Filler styrene-free (420 g)
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x Straightened rod Ø 1.5 mm x 1500 mm
3 x 500 ml sealer (DOPE)
2 x Nitroverdu 500 ml
2 x Spannlack 1000 ml
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x 20 g tin paste
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Partall paste 650 g
1 x Straightened threaded rod M2-1m
2 x Universal Colour Paste signal white (RAL 9003) 1 Kg
2 x Paint gun for sprays
2 x Straightened rod Ø 8.0 mm x 1000 mm
3 x Servo NARO Max Std
1 x Universal Colour Paste deep black 50 g
2 x Motor A2212/13T
1 x Ferrita 27x14x7 mm
2 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Ball link M3 RPA's-UAV's
2 x Ball link M2 (10 pcs)
1 x Joint with bearing M2 22x5,5
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x M2,5 Diam metal ball link V3 (2 pcs)
2 x M2,5 5Diam metal ball link V3 (2 pcs)
2 x Ball link M1.6 (6 uds)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
3 x M2 5Diam black ball link V2 (2 pcs)
1 x Ball link M2,5 (10 pcs)
3 x Short ball link M3 (6 uds)
2 x M3 Maxi ball link (2 uds)
1 x 6 mm ball link M3 (10 pcs)
2 x Blue metalic ball link M3/3 azul (2 pcs)
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x Short ball link M2 (6 uds)
1 x Socket head long ball link M3 (2 uds)
1 x M2,5 5Diam black ball link V2 (2 pcs)
2 x Long ball link M1.6 (6 uds)
1 x Short ball link M1.6 (6 uds)
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x Socket head ball link M3 (2 uds)
2 x Long ball link M2 (6 uds)
1 x M3 Maxi ball link (2 uds)
2 x Ball link M3 (10 pcs)
2 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x ABS angle 2,0x2,0x1000 mm
3 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x Profile ABS half cane 2.0x1000 mm
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
2 x ABS "T" angle 10.0x10.0x1000 mm
2 x U Profile ABS 1,0x2,0x1000 mm
1 x Profile ABS half cane 2.5x1000 mm
2 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
2 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Profile ABS Square 2 x 1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x Peel ply 93 g/m² (plain weave) 150 cm x 5m
1 x Ballast 700gr OPALE
1 x Starter EM Gear Power 250
1 x Ventus 1:4 set of instruments
1 x Strip ABS 2.0x5.0x1000 mm
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Glases Stratus
1 x Support pumb/filter Xicoy X45
1 x 
1 x Release wax 250ml
1 x Spray EC Red 400ml
1 x Universal Colour Paste deep black 250 g
1 x Support ECU Xicoy X-45
2 x Support XT60 conector (2 pcs)
1 x Painting GHT Lexan Black 150 ml
1 x Support FUEL DOT V3
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Recessed MPX connector support (6 pcs)
2 x 1000 ml sealer (DOPE)
1 x Universal Colour Paste white 50 g
1 x X-RAY Micro QR (Fuselage with canopy)
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x Glases Innovation Plus
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x L-Connector 4.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x X-RAY Micro QR
1 x Transmitter COCKPIT SX 12 M-Link (only Tx)
2 x Ferrita 17x10x6.5 mm
2 x Vasa model Catapult
1 x Servo Robbe FS 128 BB MG HV Digital
1 x "L" servo arm 65x49 mm (2 pcs)
2 x Servo TOPMODEL DS1413 T
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Joint with bearing M2,5 22x5,5
1 x M3/5 Diam metal short ball link V3 (2 pcs)
1 x MZ-12, 6 Channel HoTT
1 x Blue aluminium servo arm V2-Hitec 1,75" inch M3
1 x Medidor ángulos y/o incidencias
2 x Truck-trailer for gliders 720 x 285 mm
1 x Long ball link M3 (6 uds)
1 x Styrene plate 320x120x1.0 mm
1 x Carbon plate 350x150x2.5 mm
1 x Styrene plate 320x120x0.5 mm
2 x Foam plastic plates (310x210x2 mm)
1 x Carbon plate 350x150x3.0 mm
1 x Carbon plate 350x150x1.0 mm
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
2 x Double aluminium servo arm V1-Futaba 2,5 inch M3 (red)
2 x Red aluminium servo arm V1-Futaba 20 mm M2
2 x Transmitter GRAUPNER MZ-24 Pro
2 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Blue metalic ball link M2/2 azul (2 pcs)
2 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x Blue aluminium servo arm V1-Hitec 20 mm M2
1 x Blue aluminium servo arm V2-Hitec 1,5 inch M3
1 x Red aluminium servo arm V1-Futaba 23 mm M2
1 x M3 INDUSTRIAL ball link (2 uds)
1 x Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x ABS angle 10,0x10,0x1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x Profile ABS half cane 4x2.5x1000 mm
1 x ABS rectangular profile 12x6.0x1000 mm
1 x Rubber profile 10-2 mm 2M
1 x U Profile ABS 2,0x4,0x1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
2 x KIRA 480-31 5,2:1
1 x KIRA 480-38 5,2:1
1 x PYRO 750-50L
1 x Propeller balancer
1 x KIRA 600-24 6,7:1
1 x KIRA 500-30 6,7:1
2 x KIRA 480-43
1 x PYRO 650-53L EJE LARGO
1 x PYRO 800-40 Long Axi
1 x KIRA 600-38 6,7:1
1 x KIRA 600-17
2 x KIRA 600-16
1 x KIRA 480-43 5,2:1
1 x KIRA 480-26 5,2:1
1 x PYRO 600-12
1 x KIRA 600-30 6,7:1
1 x KIRA 400-39 5,2:1
2 x PYRO 700-56L
1 x KIRA 400-27
1 x PYRO 800-48 Long Axi
1 x KIRA 500-26 6,7:1
3 x PYRO 650-103 Long Axi
1 x KIRA 500-36 6,7:1
2 x PYRO 600-11
3 x KIRA 600-20 6,7:1
1 x DYNAMOMETER S-1580
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Tapa estado carga XT-60 (6 pcs)
1 x Astra wing Joinner (Top Model)
1 x ACTIVE ARF Electric 1.995 mm
1 x BULLIT Wing 840 mm
1 x ALBATROS 3.0 m (orange/white)
1 x Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x Canopy Astra
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x Electric spoiler 300 mm (2 pcs)
2 x Spray YELLOW Inca Lexan 150ml
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Soporte filtro FESTO (4 pcs)
1 x Foreman, scale 1:32
1 x MZ-10, 5 Channel HoTT
1 x Manometer 4 mm
1 x Spikes Band (5 m)
1 x Charger LiPo Charger4
1 x Propeller Pleg CAM-Prop 10x6 + Spinner
1 x Spinner fixed propeller 42 mm / 5,0 mm
1 x DG-303 ACRO 3750 mm, canopy
1 x SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
1 x Jun-Si iCharger 4010 Duo
2 x Brake for 140 mm wheels
1 x Spinner Alumin. fixed propeller 30 mm / 3,0 mm
1 x ALU servo arm 90º 3 mm shaft
1 x Blue aluminium servo arm V3-Hitec 1,5inch M3
1 x Propeller 9x7 SlowFlyer
1 x Propeller 3x2
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x Propeller 10x4,7 SlowFlyer
1 x Savox Brushless Servo SB-2271SG
1 x Electric spoiler 250 mm (2 pcs)
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x Challenger ARF (Top Model)
1 x Bidule 55 V3 2460 mm
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Bidule 55 2460 mm Cabina
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x 11 mm wing servo holder
1 x Albatros red/white (Top Model)
1 x Albatros ,spare cockpit (Top Model)
1 x 18 mm wing servo holder
1 x Avia spare fouselage CF reinforced (Top Model)
1 x Electric spoiler 185 mm (2 pcs)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Astra (Top Model)
1 x Bidule 111 3000 mm
1 x Bidule 111 3000 mm Canopy
1 x Canopy Sweet / Siesta
1 x Spring clamp for tube Ø29 mm ext 1pc
1 x STANDOFF GAS ENGINE MOUNT 38 mm
1 x Hobbylite Filler, Balsa colour
1 x Electric spoiler 440 mm (2 pcs)
1 x Avia (Top Model)
1 x ARTIST 1.560 mm
1 x PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x 13 mm wing servo holder
1 x Blades 330mm
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Motor Moki 100 BVT
1 x Motor Moki S 300 cc 5 cylinders
1 x Baffles for Radial Moki S250/330 mm
1 x ASK 21 6.8m
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x Ferrita 14x8x5.5 mm
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
2 x Bungee HLG Premium
1 x PropCover 16-20" (2 pcs)
1 x Xoar Electric Beechwood Prop 21x10
1 x Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x Xoar Electric Beechwood Prop 22x10
1 x Xoar Electric Beechwood Prop 24x8
1 x Servo TOPMODEL S7520 MG
1 x 90x60 mm standart servo cover
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Hose clips 6 mm
1 x Kit hydraulic brake
1 x Distanzstück motor OS 120 AX
1 x Servo TT ACE SHV 1504 MG
1 x Servo AN-20 MGBBA
1 x Blue aluminium double servo arm V3-Hitec 3,5inch
1 x Propeller APC 13x6.5 Electric Pusher
1 x aluminium servo arm V2-JR 2,0 inch M3
1 x Servo SAVOX SV-1260 MG
1 x Propeller APC 10x5.5 MR Electric multirrotor PUSHER
1 x Red aluminium double servo arm FUTABA 40 mm M3 F3A
1 x Propeller APC 10x5 Electric Pusher
1 x Servo AN-8 HBA
1 x Propeller APC 12x3.8 SF
1 x KIRA 480-38
1 x MR30 connector male
1 x U Profile ABS 8,0x4,0x1000 mm
1 x KIRA 480-34 5,2:1
2 x PYRO 700-45
1 x DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV)
35,733.94EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies