1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | 800TVL CMOS camera for FPV |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
2 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | USB Mini Camera endoscope |
2 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
2 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
2 x | Adapter lead MPX/XT60 |
1 x | Circlick securite |
2 x | 3 LiPo XH>EH adapter |
2 x | TP/TopFuel - XH 2/3S Adapter |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | 30 cm BEC cable (female) |
2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Cabel charger transmitter GRAUPNER |
2 x | CM-3 |
2 x | ABS tube 5.0x3.0x1000 mm |
2 x | ABS tube 5.0x4.0x1000 mm |
3 x | ABS tube 2.0x1.0x1000 mm |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
2 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
2 x | ABS tube 12.0x10.0x1000 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
2 x | ABS tube 14.0x10.0x1000 mm |
1 x | Couple M4 for wire (10 pcs) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
3 x | ABS tube 7.0x5.0x1000 mm |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 20x200 mm battery rings |
2 x | SE Ring 400 mm (2 pcs) |
1 x | Tape GFK 50 mm |
1 x | Tape GFK 25 mm |
1 x | Cinta Goldfix 1m |
1 x | Spikes Band (5 m) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Foil for sticking flaps and ailerons |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Marker ties (20 pcs) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Electric rocket starters (6 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | Servo Mount M (blue) |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Prop Shaft Adapter 5 mm "long" |
1 x | 2,3 mm Prop Drive Günther M4 |
1 x | 2 mm Prop Adapter M5 |
1 x | 5 mm Prop Adapter M8 |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 3 mm Long Prop Adapter M5 |
1 x | 2,3 mm Prop Adapter M6 |
1 x | 6 mm Prop Adapter M8 |
1 x | Connector CAN 15 |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Extension 2/3 lipos JST/C |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
2 x | RX cabel |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Female connector for 10 pines AWG |
1 x | FX three-position switched channel, long |
1 x | Male connector for 6 pines AWG |
1 x | EWC3 40 cm wing connector |
1 x | Short Switch On/Off micro |
1 x | CC 02 |
1 x | MPX-Dean "T" Adapter |
1 x | Dean "T" - Futaba Adapter |
2 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | Connector Sub-D 2+5 Female |
1 x | Female connector for 12 pines AWG |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Hacker X-Pro USB interface V2 |
1 x | TrainerCord (master-learner) |
1 x | 5 LiPo XH>EH adapter |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | LA500 pre-rotation gear |
2 x | ABS tube 3.0x1.0x1000 mm |
2 x | LA500 pilot-seat set |
1 x | ABS tube 16.0x14.0x1000 mm |
2 x | ABS tube 4.0x3.0x1000 mm |
3 x | ABS tube 3.0x2.0x1000 mm |
3 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
2 x | ABS tube 3.0x2.0x330 mm |
1 x | AC-10 pre-rotacion with motor |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | ABS tube 9.0x7.0x1000 mm |
2 x | ABS tube 10.0x8.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
2 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber rod 16 mm x 1000 mm |
2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | 1/7 Pilot "Japanese" |
1 x | 1/4 Pilot "Mike" |
2 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
2 x | LA500 front gear holder |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | LA500 housing-upper cyclic |
1 x | Autogyro Cierva C30 Spain |
1 x | LA500 Blades |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | T-shape holder metal LAMA |
2 x | Tailwheel for F3A size |
1 x | Tailwheel for 20/60 size |
1 x | Retract undercarriage for gliders up to 2 Kg |
1 x | Tren de cola carbono 50-70cc |
2 x | BALSA trip 3.0x3.0x1000 mm |
2 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Support pump Xicoy X45 |
1 x | Support conector MPX (6 pcs) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | 20 mm gas motor standoff |
1 x | 10 mm gas motor standoff |
1 x | 12 mm floating pad (49 pcs) |
1 x | 40 mm gas motor standoff |
2 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | TX-Tray V1 (L) (Black) |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
2 x | BALSA trip 2.0x10.0x1000 mm |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
2 x | Liston HAYA 3 x 10 x 1000 mm |
2 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Aro pasacable Ø25 mm (4 pcs) |
2 x | Liston HAYA 8 x 8 x 1000 mm |
2 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Support pumb/filter Xicoy X45 |
2 x | BALSA triangular 8x8x1000 mm |
2 x | Suction funnel for carburetor 90D-M (red) |
1 x | 50 mm gas motor standoff |
1 x | Switch Cap L (black) |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | Transmitter Stick Ends V2 Red - M3 (2 pcs) |
2 x | Transmitter Stick Ends V5 Blue - M3 Futaba/Hitec/Spektrum DX8 (2 |
2 x | Transmitter Balancer SPK DX-8 |
1 x | 45 mm gas motor standoff |
1 x | Transmitter Stick Ends V5 Rojo - M3 Futaba/Hitec/Spektrum DX8 (2 |
2 x | Switch Cap M (blue) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | SUS wire 3m (nylon coated) |
2 x | Servo Mount S (red) |
2 x | Transmitter Stick Ends V1 Blue - M3 (2 pcs) |
2 x | Transmitter Stick Ends V1 Red - M3 (2 pcs) |
1 x | T- Fittings blue color (2pcs) |
1 x | 5 mm gas motor standoff |
1 x | 15 mm floating pad (30 pcs) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Transmitter Balancer Futaba V |
1 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
1 x | 10 mm floating pad (72 pcs) |
1 x | Switch Cap M (silver) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Transmitter Stick Ends V5 Blue - M4 JR/DX7 |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Motor Mega AC 16/07/03 |
1 x | 10 mm Prop Adapter M12 |
1 x | AXI 2820/8 V2 |
2 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
1 x | AXI 2826/12 V2 |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Motor Mega AC 16/07/06 |
1 x | MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless |
1 x | Motor Mega AC 16/07/08 |
1 x | Motor Mega AC 16/15/04 |
1 x | Motor Mega AC 22/30/03 |
1 x | Motor Mega AC 16/07/04 |
1 x | Motor Mega AC 22/45/02 E |
1 x | Motor Mega AC 16/25/04 COMBAT |
1 x | Frontal Adapter for AXI53xx |
1 x | Motor Mega AC 16/15/07 |
3 x | 8 mm Adapter for AXI53xx |
1 x | Motor Mega AC 16/15/08 |
1 x | AXI 2814/10 V2 |
1 x | 2 mm Prop Adapter M6 |
2 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | AXI 2820/14 V2 Long |
1 x | AXI 2820/12 V2 |
1 x | AXI 2814/20 V2 Long |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
1 x | Straightened threaded rod M3 - 1m |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | EWC6 40 cm wing connector |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Rotor Mast |
1 x | Spring Clip Ø25 mm |
1 x | White aluminium 230 mm landing gear |
1 x | 90x60 mm standart servo cover |
1 x | Indoor Brushed motor kit |
1 x | Tailwheel for 1-3 kg models |
1 x | ACTIVE ARF Electric 1.995 mm |
1 x | Tail wheel for 8-12 kg models |
1 x | Baseplate servo |
1 x | RX external cable for estandar receivers |
1 x | SD HC 8 GB |
1 x | 30 cm BEC cable (male) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | CC 01 |
1 x | Straightened threaded rod M2-1m |
1 x | 2 LiPo XH>EH adapter |
1 x | 4 LiPo XH>EH adapter |
1 x | Connector Sub-D 2+5 Male |
1 x | Male Prolonger TP 4/5S |
1 x | Cabling for Fox MDM1 wings |
1 x | EWC3 100 cm wing connector |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
1 x | Helices DJI Mavic Air STEALTH "Black" (4x Ud) |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Servo arm with 4 mm hole to FEMA 9810A |
1 x | Brake for 140 mm wheels |
1 x | LA500 tail empennage |
1 x | Absorver mount set for 5-10 Kg models |
1 x | Compact on-board starting system (9713) |
1 x | LA500 ciclic lever |
1 x | Head core |
1 x | Rotorshape Autogyro |
1 x | LA500 rotor head core |
1 x | Legs + electric brakes for Viper Jet 90 |
1 x | Propadapter for motor A50-V3 |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Fiberglass landing gear for 140-160 |
1 x | O-ring Saito FG-73 5cyl |
1 x | Junta humo metalica G20 (DLE20/DLE20RA/DLE40) |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
1 x | TWIST planeador gomas |
1 x | 30 mm Alu spinner 3 mm pleg. propeller |
1 x | Angle measurer |
1 x | PPS-4D Propeller |
1 x | Avia (Top Model) |
1 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
1 x | IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD |
1 x | Tail gear set (60-120 class) |
1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | BALSA trip 10x10x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Albatros red/white (Top Model) |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | Astra wing Joinner (Top Model) |
1 x | Bidule 111 3000 mm Canopy |
1 x | BULLIT Wing 1095 mm |
1 x | 65 mm mini servo cover |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | 7 mm gas motor standoff |
1 x | 28 mm tailwheel unit |
1 x | 11 mm wing servo holder |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | SE Ring 250 mm (2 pcs) |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Switch Cap L (silver) |
1 x | Transmitter Stick Ends V5 Red - M4 JR/DX7 |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Refueling Cup V2 Red |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | Red aluminium servo arm V2-Futaba 2,0 inch |
1 x | Servo Bolt M3x8 (8 pcs) |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Angle support XT60 conector |
1 x | Wheel 38 mm V2 |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | TX-Tray V1 (L) (Red) |
1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
1 x | Transmitter Stick Ends V4 Blue/Silver - M3 (2 pcs) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Switch Cap M (red) |
|
10,102.66EUR |