Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Hélice BIELA 28x12 3Bl (Tripala)
145.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Pletina MPX (5 pcs)
1 x	Interruptor OPTO Gas Engine
1 x	Servo Controller Fibra optica
1 x	Gorra Hispano Aviación
2 x	Conector equilibrado XH (3S) hembra (2 pcs)
1 x	Conector equilibrado XH (4S) hembra (2 pcs)
1 x	Conector banana oro 8,0 mm 5 pcs (hembra)
1 x	Conector banana oro 8,0 mm. 5 pcs (macho)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m
1 x	Equilibrador hélices
1 x	Prolongador silicona 10 cm (Graupner)
1 x	Prolongador cable servo 0,14 PVC, conector ZH micro
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
1 x	Prolongador 15 cm (Futaba)
1 x	Prolongador S-Bus JR/JR 10cm
2 x	Antena helicoidal RHA 5.8 GHz (SMA plug) 12 dBi
1 x	Acople ALU M2 Ø 3 (2 uds)
1 x	Bayoneta de carbono 13,4 mm Ø 0,48 mm
1 x	Prolongador Futaba 100 cm Ø 0,35 mm
1 x	Medidor de incidencias
1 x	Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Varilla carbono 1.0 mm x 1000 mm
1 x	Horn de mando 5/20 con rótula M2
1 x	Arandela conica alumino M3 rojo (8 pcs)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Varilla carbono 0.5 mmx1000 mm
1 x	Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x	Varilla carbono 12 mm x 1000 mm
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Arandela dentada 4.3 mm (20 pcs)
1 x	Varilla carbono 0.5 mmx1000 mm
1 x	Circlick para eje 1.5 mm (10 pcs)
1 x	Arandela dentada 2.7 mm (20 pcs)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x	Fibra carbono "MANGA" 12k 170 mm x 5 m
1 x	Arandela dentada 2.2 mm (20 pcs)
1 x	Varilla carbono 1.5 mm x 1000 mm
1 x	Horn control flaps (1 pcs)
1 x	Arandela 1.7 mm (20 pcs)
1 x	Arandela M3 negra (4 pcs)
1 x	Circlick para eje 1.9 mm (10 pcs)
1 x	Prolongador S-Bus 1-2 silicona 30 cm
2 x	Horn aluminio negro LH largo L31xH30 (2pcs)
3 x	Carro remolque para veleros 720 x 285 mm
1 x	Arandela abierta 4.1 mm (20 pcs)
1 x	Medidor angulos tamaño pequeño
1 x	Arandela abierta 2.1 mm (20 pcs)
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 50m
1 x	Horn aluminio pequeño amarillo (2pcs)
1 x	Fibra carbono tela 160g/m2 100 cm x 25 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
2 x	Medidor ángulos
1 x	Varilla carbono plana 3.0 x 1.0 x 1000 mm
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Motor OS 3820-1200 eléctrico
1 x	Varilla carbono 3.0 mm x 1000 mm
1 x	Prolongador 30 cm (Futaba)
1 x	Horn con ball 55x40
1 x	Horn aluminio pequeño azul (2pcs)
1 x	Varilla carbono 14 mmx1000 mm
1 x	TX 250 mW especial GOPRO
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Horn de mando 5/15 con rótula M2
2 x	Varilla carbono 16 mm x 1000 mm
1 x	Varilla carbono plana 1000x3.0x0.13 mm
2 x	Varilla carbono 2.5 mmx1000 mm
1 x	Arandela conica ancha alumino M3 rojo (4 pcs)
1 x	Arandela de bloqueo 3 mm (10 pcs)
1 x	Horn aluminio roscado 6 mm con rótula
1 x	Prolongador S-Bus JR/JR 20cm
2 x	Bujía Champion RCJ-7Y para ZG
1 x	Tornillo Servos M2x9/16 (4 pcs)
3 x	Bujía DLE CM6
2 x	Bujia OS G5 gasolina
1 x	Futaba CGY760R - Gyro+Receiver+Governor con Progm. GPB-1
1 x	Hélice Plegable CAM PROP 10x6 + Cono completo
1 x	Conector equilibrado XH (2S) macho (2 pcs)
1 x	Conector equilibrado XH (5S) hembra (2 pcs)
1 x	Conector 5,0 mm EC5 macho con funda (2 pcs)
1 x	Conector banana oro 5,5 mm antichispa
1 x	Horn aluminio pequeño rojo (2pcs)
1 x	Plancha estireno 320x120x1.0 mm
1 x	Malla PVC diagonal 290x185x0,32 mm
1 x	Plancha estireno 320x120x0.5 mm
1 x	Fibra de vidrio picada 3mm (1 Kg)
1 x	Manta bolsa de vacio 300 gr/m2 Bobina 1m
2 x	Bujía motor OS Tipo F
2 x	Bujía NGK CM6
1 x	Bujía motor OS nº 8
1 x	Conector equilibrado XH (4S) macho (2 pcs)
1 x	Conector equilibrado XH (5S) macho (2 pcs)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Horn largo de latón M4 para cable (4 pcs)
1 x	Varilla mando roscada M2,5 (2 uds)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x	SistemaLDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 mm
1 x	Reenvío de Profundidad 70x28 mm "tipo Kato"
1 x	Horn de mando variable 6 mm M3
1 x	Horn de mando corto con rodamiento (2 pcs)
2 x	Reenvío de Profundidad 80x28 mm "tipo Kato"
1 x	Horn extra largo 60x30
1 x	Horn micro type4 Ø 0,5(2 pcs)
1 x	Varilla carbono plana 10.0 x 1.0 x 1000 mm
1 x	Reenvío de Profundidad 90x28 mm "tipo Kato"
1 x	Varilla carbono 0.8 mmx1000 mm
1 x	Horn mando DU-BRO 1/2 (2 pcs)
1 x	Horn de mando medio extrafuerte con rodamiento 2,8x24
1 x	Motor XPower XC 4226/12 LS
1 x	Tren de cola carbono 50-70cc
1 x	Aro metalico delantero FEMA
1 x	Plancha termoformable 0,1 mm (0,004") DIN A5
1 x	Plancha ABS 500 x 400 x 2,0 mm (blanco)
1 x	Bujía ROSSI R8
1 x	Llave bujía NGK MVVS
1 x	Bujía 1/4-32
2 x	Bujía 1/4-32 Glow
2 x	Bujía Saito 400
1 x	Bujía 1/4-32 EVO 10GX
1 x	Bujía motor OS nº 3

3,627.08EUR