13.75EUR

Epoxy 5min KAVAN 2x 100g
[KAV569963]


Epoxy 5min KAVAN 2x 100g
Premium 5min clear two-part epoxy adhesive. Packaging: 2x bottle 100 g (hardener + resin).
A clear, very fast curing, two-component, high-strength epoxy adhesive that is resistant to fuels, solvents and vibration; easily sandable when fully cured. Does not become brittle with age. Bonds wood, fibreglass, carbon composites, aluminium, copper, steel, brass, concrete, glass, hard plastics, polystyrene foam, etc.
Properties
Ingredient mixing ratio: 1:1 (by volume and weight)
Initial colour: clear
Final colour: clear
Viscosity (after mixing): 5000–10000 mPa.s
Working time (to gelation): ca. 5 min (20 °C to 25 °C)
Handling of glued parts: after 15–20 min
Half strength: after 10–15 min
Full strength: after 2–3 h
Full cure: 16–24 h
Shear strength: 20 N/mm²
Temperature resistance of bonded joint: -40 °C to +120 °C
Removal of excess uncured adhesive: cloth or paper towel moistened with denatured alcohol.
Thinner: S6300 epoxy thinner (the use of thinners increases the curing time and reduces the final strength of the joint - if you need a "thinner" epoxy, use a laminating or finishing epoxy with a lower viscosity).
Use as a sealer, suitable fillers: microballoons, talc, baby backfill, diatomaceous earth, fine balsa or lime sawdust, chopped fibreglass. Caution - the addition of filler may reduce working time by up to 25% and (depending on the type and amount of filler used) may reduce joint strength.
Suitable for bonding: softwood and hardwood, chipboard, plywood, metals, polystyrene foam, ceramics, porcelain, fibreglass and carbon laminates, fibreglass and carbon fabrics and fibres.
Not suitable for bonding: soft and flexible plastics (incl. EPP and EPO), polyethylene, Teflon.
Storing: in a tightly sealed container, in a cool, dry and dark place (at a temperature of 10 °C to 25 °C). Do not expose to temperatures below 10 °C. Take care not to confuse the resin and hardener caps - even a small amount of hardener can degrade large quantities of resin.
Shelf life: under proper storage conditions, we guarantee a shelf life of 1 year while maintaining the above product properties. Practical experience shows that epoxy resins based on bisphenol A and epichlorohydrin maintain their excellent properties for many years when stored correctly (see also Note 2) - if you buy a pack of adhesive appropriate to your consumption, you do not have to "worry" about its lifetime at all.
Note 1: the curing of the adhesive depends mainly on the ambient temperature; if you mix larger quantities of epoxy at a time (typically more than 20–30 g) it can cure much faster - to maintain longer working time, the adhesive needs to be cooled, e.g. in a water bath. This is because heat is released when the resin and hardener react, and also because the resin cures faster at higher temperatures. And since the mass of the resin (and therefore the amount of heat generated) increases faster than the size of the external surface from which heat is dissipated to the surroundings as the volume increases, more resin is heated and cured faster. Don't you believe it? Believe. A 1 cm cube has a volume of 1 cm³ and a surface area of 6 cm² - a 6:1 ratio, while a 2 cm cube has a volume of 8 cm³ and a surface area of 24 cm² - a ratio of only 3:1.
Note 2: originally clear and quite flowable epoxy resins based on bisphenol A and epichlorohydrin can sometimes thicken ("curdle" like bee honey) and lose transparency - this is due to exposure to low temperatures, humidity or time. By gently heating it in hot water (60–70 °C) for a few minutes until the resin becomes clear again in its entire volume, you will get the resin "as new" again, with its original properties.
The product contains substances classified as hazardous within the meaning of Regulation (EC) No 1272/2008. For detailed information see the section "Downloads".


temporalmente fuera de stock
temporalmente fuera de stock

Comentarios

Clientes que compraron este producto, también han comprado
Ciano KAVAN Thin 20g
Ciano KAVAN Thin 20g

temporalmente fuera de stock
temporalmente fuera de stock

Tensor de riostras M2,5x32/48 (2pcs)
Tensor de riostras M2,5x32/48 (2pcs)

temporalmente fuera de stock
temporalmente fuera de stock

Categorías
* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
  3D IMPRESION
  Actuadores
  Adaptadores->
  Altimetros->
  Amperímetros
  Anemómetros
  Auto-Pilot
  Banco pruebas
  Baterías->
  Bayonetas
  BEC/Cables/Conector/
Interrup

  Bisagras
  Cables
  Cajas de vuelo
  Camaras->
  Cargadores->
  Catalogos
  Catapultas/Bungees
  Centralitas/Registro de Datos->
  Cintas/Cierres/Bridas
  Combustible->
  Conectores
  Conos/Muletas->
  Emisoras/ Radios/Receptores->
  Extintores
  Extractores piñones
  Ferritas
  Fibra/Carbono/Planchas/Malla/ABS
  Fundas
  Gafas
  Hardware
  Helices->
  Herramientas
  Horns mando
  Humo/Cohetería/Pirotecnia
  Instrumentos/ Paneles
  Linkages/Clevis
  Luces/Iluminacion->
  Maderas/ Listones
  Merchandising
  Pegamentos/Resinas/Epoxy->
    Cianocrilato->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resinas/Gelcoat
    Microbalones
    Pegamento contacto
  Pegatinas
  Perfiles
  Pilotos
  Prolongadores
  Recubrimientos/Termorretráctil
  Reguladores / Variadores->
  Remolque
  Rótulas
  Ruedas/Ejes->
  Servos->
  Simuladores
  Soportes/CG/Incidenc.
  Sprays/Pinturas/Barnices/Pastas
  Tornilleria
  Trenes de aterrizaje->
  Tubo Carbono/Latón/Acero/Alu
  Varilla Acero/Latón/Alum
  Varilla carbono
  Varillas-Listones ABS
Coches / Trucks->
Motores y Turbinas->
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Equilibrador hélices
1 x Equilibrador hélices
1 x Ferrita con funda
2 x Aramid 50 daN 50 m
1 x Ballast 700gr OPALE
2 x Paramotor BackPack XXS (sin accesorios)
3 x Paracaidas BACKUP X100
1 x Para-RC Trike "RC-Bullix"
1 x Spray grafito 33
1 x Bisagra de nylon 20x20x0,3 (10 pcs)
1 x Bisagra papel CA (12 uds)
1 x Varilla acero Ø 0,8 mm x 1000 mm
1 x Varilla acero Ø 1,0 mm x 1000 mm
1 x Cinta fibra vidrio 25 mm
1 x Conector empalme tubo de combustible (gold)
1 x Conector FESTO M7 Quick 6mm 90º
2 x Bomba de gasolina eléctrica 12V
1 x Conector FESTO M7 racor 4mm
1 x Bomba combustible manual gas/glow
2 x Bomba combustible SE V2
1 x Conector FESTO 4-3mm
1 x Conector FESTO M3 Quick 3mm 90º
1 x Depósito de gasolina de 280 cc completo
1 x Conector FESTO M7 racor 6mm
1 x Conector FESTO M5 Quick 4 mm
1 x Sistema de arranque a bordo (9525)
1 x Sistema de arranque a bordo (9715)
1 x Encendido glow remoto más set para montaje interior
1 x USB programador GO servos
1 x Brazo servo "L" 65x49 mm (2 pcs)
1 x Servo FUTABA SBL 471 SV
1 x MIG 29 3D RTF, Servo
1 x Servo GO-02 Digital 1.8g
1 x Soporte para aviones
1 x Soporte WingFix ULTRA BE
1 x Carro remolque para veleros 720 x 285 mm
1 x Tubo carbono 3K-PW (Ø25 mm, Ø22.5 mm L:2000 mm)
1 x Tubo carbono (L 1000 mm, Ø4 mm, Ø3 mm)
1 x Tubo carbono 3K-PW (Ø19 mm, Ø15 mm L:1000 mm)
1 x Tubo carbono (L 2000 mm, Ø12 mm, Ø10 mm)
1 x Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x Servo BLS-M55B 61.2kg
2 x Paracaidas rescate "RC-Evo-Cross"
1 x Servo AN-20 MGBBA
1 x Manga viento Ozone S - 700 mm
1 x Led (verde - 2 pcs)
1 x Servo SAVOX SW-1250 MG digi
1 x Set de piñones metálicos HS85MG/5085MG
1 x Servo SAVOX SC-1251 MG
1 x Servo HITEC D145 SW
1 x Servo SAVOX SV-1273 TG
1 x Paracaídas P4
1 x Bancada servo ala 13 mm
1 x Servo GO-1081 MG 45 kg.cm 0.085s/60º
1 x Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x Servo HITEC D645 MW
1 x Servo FUTABA BLS172 SV
1 x Led Flash (rojo - 2 pcs)
1 x Servo HITEC D625 MW
1 x Bomba electrica Fuel 12v
1 x Bomba de humo JETs PowerBox 2 salidas
1 x Bomba Humo Variable
1 x Junta bomba combustible electrica KAVAN
1 x Bomba de combustible JM eléctrica
1 x Bomba Combustible RX V2
1 x Bomba de humo regulable RCEXL
1 x Bomba de humo PowerBox
1 x Bujía NGK CM6
1 x Tubo carbono (L 1000 mm, Ø30 mm, Ø26 mm)
1 x Piloto MAX ARTF
2 x Para-RC Mix
1 x Vela OXY 5.0 m2
1 x Servo Robbe FS 525 BB MG HV
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Piloto LUCAS ARTF
1 x Aceite DELUXE turbine Jet Oil 1 litro
1 x Aceite Castrol TTS 1 litro
1 x Aceite Castrol A747 1 litro
1 x Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport
1 x Mochila OPALE paramodels
1 x Set cintas unión paracaídas 145 cm
1 x NF-3X-350 set
1 x Motor XPower XC 4226/12 LS
1 x Simulador del Quemador NF-Jet1RY Set
1 x DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x Reflector 18 mm (2 pcs)
8,459.03EUR
Fabricantes
Información del Fabricante
Kavan
Otros productos
Idiomas
Español English
Monedas