Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA72012

168.00EUR

SPS 70V 140/280 A
[EMCA72012]

- Electronic safety switch with anti flash protection. The original! From the inventor of the "gas cap" switch.

- Electronic safety power switch for electric power systems. An anti-flash-circuitry prevents the dreaded sparks during connecting the battery.

- Separates the motor from the battery. The electric motor drive remains inactive and therefore non hazardous until activation. Finally you can work on your model without the fear of suddenly running motors.

- High-class silicone connection cable of 4mm² (AWG11) thickness. 6-fold multilayer-board with up to 9mm² copper width.

- For 6S up to 16S LiPo batteries (18V to 70V). 140A continuous current and 280A peak current - perfect for F3A models.

Attention: The flash protection function of the SPS does not pre-charge the capacitor within the motor controller! Some manufacturers require the pre-charging of this capacitor. Perhaps the SPS might not work properly in this special case.

Delivery includes desired switch actuator with keyring pendant or SPS-RCS, screws, EMCOTEC 3D sticker, operating instructions.

ATTENTION: because of customer demands you are able to select the switch actuator you want! Please select the fitting unit. By default the SPS magnetic switch actuator will be delivered.

Specifications:
- Voltage range: 18V to 70V (6S to 16S LiPo)
- Power consumption (switched off): max. 0.5 mA, typ.0.25 mA
- Permanent current: 140 A
- Max. peak current: 280 A
- Power dissipation at 140 A: aproxx. 9.6 W
- Dimensions: 65x30x20 mm (2.56x1.18x0.79 in)
- Weight inl. cable (4 mm²/AWG11): 105 g (3.7 oz)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll temporarily out of stock	Servo HITEC HSB-9380TH temporarily out of stock	Stainless steel cable Ø 0.5 mm (10 m) temporarily out of stock
Epoxy FINISH-CURE™ 20 min (130g) temporarily out of stock	Fuel tank fiberglass Easy Jet 2,2 l temporarily out of stock	Spinner 100 mm CFK temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Turbina XICOY X195 compact
2,959.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Screw-lock connector M2 (2 uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Cabin latch Fox MDM1 4m (pair)
2 x	Locking cable tie 2.5x100 (uds)
1 x	Covered closure or fairings
1 x	Locking cable tie 4.6x203 (uds)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Stainless steel cable Ø 0.5 mm (2 m)
2 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
2 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
2 x	Cap closure 33/23.5mm (2 uds)
1 x	Fiberglass plate 350x150x1.5 mm
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Cinta Goldfix 1m
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x
1 x	SE Ring 360 mm (2 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Spikes Band (5 m)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	SE Ring 450 mm (2 pcs)
1 x	Marker ties (20 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	BALSA trip 4.0x4.0x1000 mm
2 x	6 mm red aluminium threaded horn with patella
1 x	Pine wood slat 10x10x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
2 x	Brass control horn M3 short for wire (2 pcs)
1 x	Beech dowels 2.0 x 1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	RH long aluminium horn (2pcs)
2 x	Brass control horn M4 short for wire (10pcs)
1 x	Pine wood slat 3.0x10.0x1000 mm
3 x	Solvent Plasti Dip 1000 ml
1 x	Painting GHT Lexan Black 150 ml
2 x	Spannlack 1000 ml
1 x	Spray EC Red 400ml
3 x	Spray Graphit 33
2 x	Plasti Dip Liquid Tape 429 ml black
1 x	Paint gun for sprays
1 x	Nitroverdu 500 ml
2 x	Release wax 250ml
1 x
2 x	Partall paste 650 g
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
2 x	15 mm reinforced hinge
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
2 x	Fast'n EZ-CA-Hinge (12 uds)
2 x	Pin type hinge Al 3,0x50 mm (2 pcs)
2 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Ball Link Plier
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Round Rod 1,25x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x	Support ECU Xicoy X-45
1 x	Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Steering arm 16 mm Ø 3 mm
3 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Plasti Dip Liquid Tape 429 ml orange
2 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Horn 5/15 with M2 Bearing
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Cable control set
1 x	Long extra-strong control horn with bearing 2,8x34
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	25 mm reinforced hinge
2 x	Propeller POWER-PROP 7x7
2 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Pin hinge 39x20 mm (10 uds)
2 x	4 LiPo XH>EH adapter
1 x	Connector Sub-D 2+5 Female
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Cabel charger transmitter GRAUPNER
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Towing hook
2 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Towing hook
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Propeller diller for EME35 and DLE35
2 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
2 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
2 x	20 mm carbon horn
1 x	Miniature brass strap hinge, 1 m
1 x	18 mm reinforced hinge
1 x	Small aluminium horn red (2pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Universal Colour Paste deep black 250 g
1 x	Universal Colour Paste deep black 50 g
2 x	Extra long horn 60x30
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Universal Colour Paste white 50 g
1 x	Small flex hinge (12 uds)
1 x	Hobbylite Filler, Balsa colour
1 x	Indoor hinge with servo arm integraded
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	Small control horn with bearing (2 pcs)
1 x	Rudder forward 80x28 "type Kato"
1 x	Large flex hinge (12 uds)
1 x	Horn DU-BRO 1/2 (2 pcs)
2 x	Brass control horn M2 long for wire (10pcs)
1 x	Small pinned hinge (12 uds)
1 x	Round flex hinge (12 uds)
1 x	Small pinned hinge (6 uds)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	5 mm Prop Adapter CN-Spinner
2 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	2.3 mm Adapter for 30 mm spinners
1 x	NF-3X-350 set
1 x	LED lighting system High Power
1 x	LED wire (orange - 2pcs)
2 x	LED blink wire flashing (blue - 2pcs)
1 x	LED wire (rojo - 2pcs)
1 x	Connector Sub-D 2+5 Male
2 x	5 LiPo XH>EH adapter
2 x	Dean "T" - Futaba Adapter
1 x	Adjustable launching hook
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	CC 01
2 x	Vest clothes Hispano Aviación
1 x	Cap Hispano Aviación
1 x	Shirt Hispano Aviación
1 x	Ball Bearings for motor A60-V2
2 x	LED wire (white - 2pcs)
1 x	Cargqador GensAce IMARS III Pro Smart Balance RC
1 x	Spinner propeller pleg. 30 mm / 5,0 mm
1 x	Cockpit metalic closing
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Central piece 42 mm 0º [12 mm]
1 x	Propeller 12x6 Falcon electric
1 x	Central piece 52 mm 0º
1 x	Central piece 42 mm - 5º
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	2 mm Prop Adapter M5
1 x	Gates hinge aluminium (1 pcs)
1 x	TrainerCord (master-learner)
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	BULL MØ1 2.600mm BLUE
1 x	Propeller APC 12x8 Glow/Gas
1 x	Horn 6/35 with M3 Bearing
1 x	5 mm M2 variable horn
2 x	6 mm M3 variable inclined horn
1 x	Spinner propeller pleg. 40 mm / 5,0 mm
1 x	Spinner propeller pleg. 40 mm / 6,0 mm "Z" carbon
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x	Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x	EASYGLIDER 4 RR
1 x	LENTUS Multiplex Fundas alas
1 x	CHALLENGER Indoor
1 x	Central piece 52 mm + 5º
1 x	20,5x14,5 Falcon electric V2 (40 g)
1 x	PROFI TX fastening rings
1 x	FIALA Propeller 23x10
1 x	FIALA Propeller 26x10
1 x	FIALA Propeller 18x10
1 x	Gates hinge
1 x	SlowFlyer control horn (3 pcs)
1 x	Small aluminium horn gold (2pcs)
1 x	Small aluminium horn blue (2pcs)
1 x	Short extra-strong control horn with bearing 2,8x15
1 x	Horn DUBRO 1/2A
1 x	Circlick securite
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 05
1 x	MPX-Dean "T" Adapter
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Spinner propeller pleg. 38 mm/6,0 mm/5º
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	9x4.7 * 22x12 carbon propeller
1 x	Prop Shaft Adapter 5 mm "long"
1 x	Propeller APC 14x6 Glow/Gas
1 x	PowerBox Evo
1 x	PowerBox iGyro 3xtra
1 x	PowerBox iGyro SRS + GPS Modul
1 x	6 mm aluminium horn with patella
1 x	PowerBox iGyro SRS
1 x	Horn mando small (2 pcs)
1 x	MicroMatch PowerBox
1 x	PowerBox MAG Sensor
1 x	Axle for AXI 28269/xx motors
1 x	Axle for AXI 5330/xx motors
1 x	LED blink wire flashing (green - 2pcs)
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Sukhoi 29S 2,2 m V2 YELLOW/BLACK (SebART)
1 x	Fokker DR-I 2400 mm (CY model)
1 x	30 cm BEC cable (male)
1 x	CC 02
1 x	Cessna 310 Red/Gold 3200 mm (CY MODEL)
1 x	F8F Bearcat #68 2.460 mm
1 x	Cessna 310 3200mm Electric Landing gear complet (CY model),<
1 x	LA-7 Lavochkin 2314 mm (CY model), Wheels and le
1 x	PIPER CUB J-3 1/4 2640 mm (TWM)
1 x	Fokker D-VIII 2090 mm R/W (CY model)

14,317.25EUR