2 x | Extractor piñones 2.3/3.2 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
2 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
2 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
2 x | Liston HAYA 10 x 10 x 1000 mm |
2 x | BALSA trip 6.0x6.0x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | Strip 2,0x2,0x330 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | SIMtransmitter 6 Mode 2 |
1 x | EasyFLY Addon |
1 x | Interface Jack Adapter IKARUS |
1 x | Slave-cable USB Easy Sim |
2 x | RF9 Flight Simulator with Spektrum Controller |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Ventral support for AX-18/AX-60 |
1 x | Smoke set "Glider" |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Round Rod 4,0x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Round Rod 1,25x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Strip 2,5x1,25x330 mm |
1 x | Round Rod 1,0x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | HBC 10035-3 32-Bit |
1 x | ESC ALPHA 60A HV |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Straightened threaded rod M2-1m |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | CC 11 Conector |
1 x | CNC FPV Display screen&Transmitter Holder Vertical |
2 x | Stickers-digit for marking |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
1 x | EWC3 100 cm wing connector |
1 x | DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV) |
1 x | KIRA 500-26 6,7:1 |
1 x | KIRA 600-24 6,7:1 |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Bidule 111 3000 mm Canopy |
1 x | Bidule 170 ARF 3.48 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Reflector 18 mm (2 pcs) |
1 x | DPSI RV Mini 5 (2008) |
1 x | Heat sink for Optotronix LEDs |
1 x | KIRA 600-20 6,7:1 |
1 x | Propeller Pleg CAM Carbon 11x4 |
1 x | Propeller Pleg CAM Carbon 12x5 |
1 x | Propeller Pleg CAM Carbon 13x11 |
1 x | Combo FOXY C3530-700 + FOXY 80 amp |
1 x | AXI 2820/12 V2 |
1 x | AXI 2814/10 V2 |
1 x | AXI 2814/10 V2 Long |
1 x | AXI 4120/18 V2 |
1 x | USBCOM 5i |
1 x | Digital scale up to 40 kg |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | 18 mm wing servo holder |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
1 x | Foaming agent for epoxy resins 200 g |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Astra wing Joinner (Top Model) |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | Servo Mount M (blue) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Servo Mount S (red) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Windsock Ozone L - 700 mm |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | CA Glue (medium) 20g |
1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
2 x | USB Interface Adapter |
1 x | LightBox SR |
|
8,524.36EUR |