1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Piloto 1/12 "Tom"
1 x Piloto 1/6 "Cindy"
1 x Piloto Jet "Green" 1/6 Scale
1 x Piloto "Duke" Legends Series(Slimline)
1 x Piloto Jet "Red" 1/6 Scale
1 x Piloto 1/10 "Jimmy"
1 x Piloto 1/12 "Langley"
1 x Piloto "Dick" Legends Series(Slimline)
1 x Piloto "Anthony" (Slimline)
1 x Piloto 1/6 "Buddy"
1 x Piloto 1/6 "John"
1 x Piloto "Adolf" Legends Series(Slimline)
1 x Piloto 1/4 "Heidi"
1 x Piloto 1/6 "Tony"
1 x Piloto JAN 1/4 Veleros
1 x Piloto 1/12 "Cougar"
2 x Piloto 1/4 "Mike"
1 x Piloto civil "Joe" tamaño 9cm (Slimline)
1 x Piloto civil "Curt" tamaño 9cm (Slimline)
1 x Piloto civil "G-Man" tamaño 9cm (Slimline)
1 x Piloto 1/12 "Fighter"
1 x Piloto militar "Kamikaze" tamaño 9cm (Slimline)
1 x Piloto 1/10 "Jack"
1 x Piloto 1/6 "Garry"
1 x Arandela conica ancha alumino M4 Rojo (4 pcs)
2 x Arandela conica alumino M4 rojo (8 pcs)
1 x Arandela conica ancha alumino M3 oro (4 pcs)
2 x Arandela de bloqueo 1.5 mm (10 pcs)
1 x Arandela conica ancha alumino M3 azul (4 pcs)
1 x Arandela de bloqueo 4 mm (10 pcs)
1 x Arandela abierta 4.1 mm (20 pcs)
2 x Arandela 4.3 mm (20 pcs)
1 x Arandela conica ancha alumino M4 Negro (4 pcs)
1 x Arandela conica alumino M4 verde (8 pcs)
1 x Arandela conica ancha alumino M3 rojo (4 pcs)
1 x Arandela de bloqueo 3.5 mm (10 pcs)
1 x Circlick para eje 1.2 mm (10 pcs)
2 x Arandela de bloqueo 2.5 mm (10 pcs)
1 x Arandela conica ancha alumino M4 Azul (4 pcs)
2 x Arandela dentada 4.3 mm (20 pcs)
1 x Circlick para eje 2.3 mm (10 pcs)
1 x Arandela M3 negra (4 pcs)
1 x Arandela conica alumino M4 azul (8 pcs)
1 x Arrancador EM Gear Power 80
1 x Banda lijado g. 120 para BSL 220/E (5 pcs)
1 x Destornillador allen 2,5x60 mm molibdeno
1 x Arrancador 12v (Max 90 and 15ccm)
1 x Conector "T" 6-6-6 mm tubo bomba vacio
1 x Arrancador Sullivan-STAR 601
1 x Bascular < 40 Kg
1 x Banda lijado g. 180 "Carburo de Silicio" para BSL 220/E (5 pcs)
1 x Destornillador allen 2,0x50 mm molibdeno
1 x Destornillador allen "Hex" Ø 2.0 molibdeno
1 x Conexión de vacío VA 1 (para manguera Ø 6 mm)
1 x Copiador 2 unidades de 20 cm
1 x Barra pegamento caliente Rojo
1 x Alicate para "Ball-Link"
1 x Alicate para hacer "Z"
1 x Bomba de vacio P1-N
1 x Corta tubos aire
1 x Destornillador Allen 1.27 mm
1 x Destornillador Allen 1.5 mm
1 x Cierre cabina V1 M3 Rojo (2 pcs)
1 x Liston ABS 1,0x5,0x1000 mm
1 x Prolongador silicona 25 cm (Futaba)
1 x Liston de BALSA 2,0x10,0x1000 mm
1 x Anemometro Xplorer1
1 x Piloto "Goose" (Slimline)
2 x Arandela abierta 2.6 mm (20 pcs)
1 x Arandela 2.7 mm (20 pcs)
1 x Círculo autoadhesivo 10 mm (72 pcs)
1 x Tornillo allen M3x20 (10 pcs)
1 x Arandela conica ancha alumino M4 Oro (4 pcs)
1 x Arandela de bloqueo 1 mm (10 pcs)
1 x Circlick para eje 1.5 mm (10 pcs)
2 x Tornillo allen M2x10
2 x Tornillo allen M2.5x8 (10 pcs)
1 x Arandela 2.2 mm (20 pcs)
1 x Herramienta para desmontar kwik link
1 x Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x Tornillo M2.5x10 (10 pcs)
2 x Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x Soporte conector XT-60 (2 pcs)
1 x Soporte Filtro FESTO
1 x Filtro para bomba vacio
1 x Tornillo allen M2x3 mm (4 pcs)
1 x Cono carbono para F3A 80 mm Spark EVO
1 x Pincel Gr.5
1 x Punta recambio soldador KAVAN 668838
1 x Perforador hélices DLE170
1 x Cono carbono para F3A 85 mm para Hacker Q-80
1 x Tijera electrica
1 x Pasta soldar 100g
1 x Cono INO de 57 mm (Imitacion carbono)
1 x Cono INO de 63 mm (Imitacion carbono)
1 x Perforador hélices para EME35 y DLE35
1 x Cono Aluminio hélice fija 45 mm diámetro / eje 4,0 mm
1 x Cono INO 82 mm Chrome (Imitacion metal)
1 x Plancha para entelar
1 x Cono Aluminio hélice fija 50 mm diámetro / eje 6,0 mm
1 x Cono NUT 5/16"x 24 -M4
1 x Varilla silverlot 45% - 1,50x500 mm (2 pcs)
1 x Cono INO de 89mm (Imitacion carbono)
1 x Cono INO 51 mm Chrome (Imitacion metal)
1 x Perforador hélices DA-85/100/120/150/200 y VM 60-210
1 x Plancha para entelar
1 x Portaequipajes BIG-MALIBU XL 285x90x44 cm Gris
1 x Cono plástico blanco hélice fija 51 mm diámetro / eje 4,0 mm
1 x Soldador pequeño 100 w/230 v
1 x Molde conector XT-60
1 x Cono INO de 75 mm (Imitacion carbono)
1 x Liston ABS 1,5x2,0x1000 mm
1 x Varilla ABS 6,0x1000 mm
2 x Liston ABS I 20x10x1000 mm
1 x Liston ABS 1,5x3,0x1000 mm
1 x Varilla ABS 1,0x1000 mm
1 x Liston ABS 1,5x4,0x1000 mm
1 x Varilla ABS 2,0x1000 mm
1 x Perfil Acero Inox. 15.5x8.5x1000 mm
1 x Termo-retráctil negro tubo de 12,7 mm 2:1
1 x Termo-retráctil rojo tubo de 3,2x1000 mm 2:1
1 x PVC termo-retráctil batería 105 mm transparente (1 m)
1 x MYLAR film A350 (1000x500 mm)
1 x Termo-retráctil negro tubo de 1,2x1000 mm 2:1
1 x Oracover Azul Cielo 2 m
1 x Gancho de lanzamiento fijo
1 x Gancho remolque inferior plano
1 x Gancho de remolque hasta 3m
1 x DUPLEX 2,4 EX MBar
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x DUPLEX 2,4 EX MU 3 Sensor
1 x DUPLEX 2.4EX MFlow2 Gas 800
1 x Conector banana oro 2 mm
1 x DUPLEX 2.4EX Central Box 320
1 x Covertor JETI DUPLEX DS
1 x Caps multicolor Switch JETI
1 x DUPLEX 2.4EX MT 300 EX
1 x DUPLEX 2.4EX RC Power Switch 10
1 x Tornillo M2.2x9.5 (10 pcs) Especial cabinas, tapas servos
1 x Jeti Box mini
1 x Tornillo M2x6 (10 pcs)
1 x Pasador Ø 1 x 6 mm (10 pcs)
1 x Tornillo allen M3x30 (10 pcs)
1 x Tornillo M2x16 PH
1 x Tornillo allen M3x8 (10 pcs)
1 x Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m
1 x Muleta 30 mm aluminio M8 Eje 5 mm "Z"
1 x Conector XT60 macho empotrar (2 pcs)
1 x Liston ABS 1,5x6,0x1000 mm
1 x Fuente Alimentacion eFuel 30A
1 x AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
1 x Acelerador Aero EPH 161 (500 g)
1 x Cono hélice plegable 40 mm diámetro / eje 3,2 mm
1 x Cono hélice plegable 30 mm diámetro / eje 2,3 mm
1 x Combustible Glow "KAVAN" air/heli 15% nitro
1 x Aceite rodamientos 25 ml
1 x Cargador SKY RC T400Q Charger 4x100w
1 x Combustible Glow "KAVAN" air/heli 10% nitro
1 x Varilla ABS 5,0x1000 mm
1 x Bateria RX JETI LiIon RB 2600 7.2v
1 x Varilla ABS 1,5x1000 mm
1 x Polo Hispano Aviación
1 x Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x Emisora JETI Duplex DS-12 EX Multimod YELLOW
1 x Emisora JETI Duplex DS-14 II RED Multimode
1 x Emisora JETI Duplex DS-16 II Carbon Line YELLOW
1 x Emisora JETI Duplex DS-12 EX Multimod BLACK
1 x DUPLEX MRMP Hall EX
1 x Galgas motor 0.05 - 1.0 mm
1 x Emisora JETI Duplex DS-12 EX Special Edition
1 x Soporte L para servo
1 x Hélice sistema de paso variable 9" para Axi VPP (recambio)
1 x DUPLEX 2.4GHz GPS
1 x Adaptador para motor A50
11,407.21EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas