Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PT-22 Ryan Recruit 2290 mm (SEAGULL)
560.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Hovercraft sailcloth
1 x	Astra (Top Model)
1 x	BABY glider drawings (Aero-naut)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Balsa panel 6.0x100x1000 mm
1 x	Protective Cover for wires Ø 10 mm 1000 mm
2 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Conector JR Servo female (10 pcs)
2 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Foam plastic plates (310x210x5 mm)
2 x	Connectors banna oro 3 mm (M/F)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Cable coupler M2 (10 uds)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Beech dowels 2.0 x 1000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Stickers-digit for marking
1 x	6 mm Quick clamp_S (10 pcs)
1 x	Angled clevis with threaded rod M3
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
1 x	Canopy Latch
1 x	Fiberglass heat shield Ø 6 mm 1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	BALSA triangular 10x10x1000 mm
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Protective Cover for wires Ø 3 mm 1000 mm
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
2 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Conector BEC male (10 pcs)
1 x	Cable coupler M2 (10 uds)
1 x	30 cm MULTIPLEX female connector
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Xplorer2 anemometro
1 x	Cable set PREMIUM, fuselage/wing
1 x	100m servo "Premium" wire (white/red/blue)
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	28 mm tailwheel unit
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Adjustable brass horn threaded M3
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	LA500 pre-rotation gear hub
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
2 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	LA500 housing-lower cyclic
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Buy Perforated film 100 cm / 10 m
1 x	LA500 ciclic lever
2 x	CNC FPV Display screen&Transmitter Holder Vertical
1 x	Cut tube
1 x	LA500 freewheel bearing
1 x	ABS 500 x 400 x 1,5 mm (white)
2 x	Digital weight, angle and balance meter BASIC
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Dean-T Plug Mold
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Micro Tarjeta SD Rapid Rush 16 GB
1 x	DINO Glider ARC
1 x	Fascination 3600 mm, Canopy (Top Model)
1 x	E-FUN BUG (ROI-Import)
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	X-RAY Micro QR (Tail Tube)
1 x	Aero-Master Fuselage (Aero-naut)
1 x	Chili F3K 2 wing servo mounted
1 x	MR30 connector female
1 x	Silicone red 1,0 qmm wire ( 1 m)
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x	Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x	Propeller drill jig DA-35/50/60/70
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	F3A carbon 85 mm spinner for AXI
1 x	Tube bender
1 x	Fiberglass plate 620x540x0,2 mm
1 x	L-39 Albatros 138"/3.5m lenght ARF
1 x	Boomerang SPRINT V2 Yellow/Black
1 x	Soldering PCBs 8pin, 5 pieces
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Xplorer4 anemometro
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	2 mm male connector (2 pcs) with safety connector
1 x	XH male balance (2S) connector (2 pcs)
1 x	XH female balance (4S) connector (2 pcs)
1 x	XT-90 connector (pair)
1 x	Silicone red 0,5 qmm wire ( 1 m)
1 x	Connectors MPX male
1 x	XH male balance (4S) connector (2 pcs)
1 x	Cable Cargador FUTABA
1 x	Silicone red 2,5 qmm wire ( 1 m)
1 x	XH female balance (7S) connector (2 pcs)
1 x	Pine wood slat 10x10x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Silicone red 0,75 qmm wire ( 1 m)
1 x	100g Flux Paste for Silver Solder
1 x	MPX plug mold V1
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
2 x	Tool for entel
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x	Film release agent PVA 25 ml
1 x	Teflon rollers 80 mm x 15 mm Diam.
1 x	51 mm INO spinner (carbon imitation)
1 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	Spinner INOVA 45 mm White
1 x	Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x	63 mm INO spinner (carbon imitation)
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Silicone red 4,0 qmm wire ( 1 m)
1 x	XH male balance (5S) connector (2 pcs)
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Buy Perforated film 100 cm / 20 m
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 50m
1 x	Fiberglass plate 350x150x3.0 mm
2 x	Servo Robbe FS 128 BB MG HV Digital
1 x	Lipo RO-POWER Ultra MAX 2300 mAh 14.8v 35c
1 x	RANGER Jet Red/Yellow 1.854mm combo
1 x	Anntena Panel 5,8 GHz - 14 dBi
1 x	Boomerang ELAN THUNDERBIRD Combo

17,553.38EUR