50.00EUR 15.90EUR

Mini-Pix Esc 15 Amp
[KON4002]


This products have a good performance and can ensure high efficiency (90% including when you're operatting under full gas avoiding overheating and flight time low) and competing with explosion engine's performance.

General features:
- Only for brushless motors.
- Soft start that rapidly rise up to the maximum power (providing security).
- RPM control for the velocities of drifts and the main rotor, great for travel in and out of the maneuvers.
- Auto-Programmable mode (APM) that automatically adjusts the variator to the radio's gas channel and sets the strength of stopping, and current and fast start limitations.
- Supply limitation.
- High performance microprocessor design thas controles the heat dissipation.
- Overheatting protection.
- Superflex high temperature cables.
- You can work with or without sensorizar engines.

Pix variator features:
- The new Pix variators are effective and low-cost; they're designed for brushless motors and replace Swing Kontronik series. The desig is entirely new. Compared with their predecessors, this variators have new and improved performance characteristics.

- The operation has been reduced to essentials things. Do not you know anything about timing / frequency? No matter; you don´t have to be an expert in engines to manage your Pix. Like their predecessors, the Pix variators, adapt themselves automatically to the engine. Thanks to their APM mode, there is no need to program it. You can concentrate on the basics: connecting the battery and fly! It's that easy!

- All variators come with a Pix Li-Po integrated that can turned on and off simply by pressing a button. In fact, a major goal in its design, was to build the variator optimized to work with rotary engines of a large number of poles like Kontronik Dancer.

- The Pix variators are an attractive alternative in cost, compared to Jazz Kontronik if you do not want any specific function such as strong BEC, unlimited partial load condition or high voltage input.

- Moreover, now the PIX drives are programmed through the interface ProgCARD.


few units
few units

Reviews

Customers who bought this product also purchased
Propeller Pleg CAM Carbon 6x3
Propeller Pleg CAM Carbon 6x3

few units
few units

AXI2203/40 VPP
AXI2203/40 VPP

few units
few units

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
    Brushless->
      Aero-Naut
      Hacker
      Jeti->
      KAVAN
      Kontronik->
        Accesorios
      MGM
      Otros
      RIPMAX
      ROI-Import
      Top Model
      YGE
    Brushed
    Program Cards
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x ‎Reed valve for DA-60/70
1 x Carburador DA-35, DA-50R-DA-100L , VM-60/70
1 x Cylinder ZG 26SC/SLH
1 x DA 85 / DA 100 / DA 100 L carburetor
1 x Spring Clip Ø25 mm
1 x Piston ring for DA-150
1 x Piston ring for DA-60 and DA-120
1 x Motor Mount for TITAN ZG45 and ZG62, length 36 mm
2 x Tufnol Choke Lever Arm d=4,7mm
1 x Piston ring for DA-50R and DA-100
1 x Motor Mount for TITAN ZG38/38S/38SC, length 36 mm
1 x BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Reed valve for DA 50-R
1 x Miniature brass strap hinge, 1 m
1 x Cylinder for ZG20
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Motor Mount for TITAN ZG45 and ZG62, length 72 mm
2 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Spring clamp for tube Ø50 mm
2 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x 2 mm male connector (2 pcs) with safety connector
1 x Connectors DEANS 4 pins (1 pair)
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Connectors banna oro 0,8 mm (M/F)
1 x Connectors banna oro 2 mm (M/F)
1 x Connectors banna gold 5,5 mm (M/F)
1 x XH male balance (4S) connector (2 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Strip 2,5x1,25x330 mm
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Ferrita 27x14x7 mm
2 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x 3-blades 20x10 carbon prop Super Silence
1 x 50cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x 55% silver electrodes (2 pcs)
1 x Dia. 25x20 mm tefon tube for escape
2 x ZENOAH ZG 38 SC with Choke Carburettor
1 x 
2 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Soporte filtro FESTO (4 pcs)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Tapa estado carga XT-60 (6 pcs)
1 x Cilinder joint for G230RC/G260RC
1 x Double side nipple
1 x Exhaust gasket for ZG20/ZG22/ZG23/ZG231 ZG26/G2D96-D/G230RC/G260
1 x Exhaust gasket DA-60/120
1 x Recessed MPX connector support (6 pcs)
1 x Dia. 16x35 mm PTFE tube for escape
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Piston ring for ZG 20 and G240RC
1 x Covered closure or fairings
1 x Ferrita 14x8x5.5 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Conector FUTABA Servo male (10 pcs)
1 x Connectors banna oro 3,5 mm (M/F)
1 x Vasa model Catapult
1 x 800TVL CMOS camera for FPV
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Conector JR Servo female (10 pcs)
1 x Conector MR-60 (pareja)
1 x Conector XT-30 (macho)
1 x Conector FUTABA Servo female (10 pcs)
1 x Nose OPTIMA 2.200 mm (Elec or Glider)
1 x 
1 x Crystal Universal RX 35.090 Ch 69
1 x 
1 x Motor mount class 48"
1 x Cooler motor type 150
1 x V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x PPS-4D Propeller
1 x MAMBO 17
1 x Gas combustible tube
2 x ZENOAH ZG 80B
1 x ZENOAH G270RC
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Support FUEL DOT V3
1 x Tygon tube 6.35 - 3.18 mm 1m
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x Tubo Teflon Ø28 mm x 10cm
1 x Stainless Steel Silencer side outlet for ZG 20/23/26
1 x ZENOAH ZG 26SC with magneto ignition
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x ZENOAH/ZG 20cc
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Tygon tube 7.94 x 4.7 mm 15 m
1 x Steel cylinder screw DA50/60/100/120
1 x Stainless Steel Tuned Pipe for engines from 45 to 80 cc
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x Titan 2.8:1 reduction gear, inline
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x Motor Advance 30-10 F3A
1 x Motor HP 220/30/A3 P4 5:1
1 x Motor Advance 50-6
1 x Motor ORBIT 20-12 with coolingfan
1 x Soporte grifo FESTO (2 pcs)
1 x Angle support XT60 conector
1 x Support ECU Xicoy X-45
1 x Tube support Ø 6mm (10 pcs)
1 x Support Flush MPX Conector (6 pcs)
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Pick up DA50/100/150
1 x Conector BEC female (10 pcs)
1 x Green smoke canister 100 g
1 x Yellow smoke canister 65 g
1 x Green smoke canister 65 g
1 x 
1 x Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x 60 mm aluminium spinner (Kavan)
1 x LENTUS Multiplex Landig gear retract
1 x XH female balance (8S) connector (2 pcs)
1 x Silicone red 2,5 qmm wire ( 1 m)
1 x XH male balance (6S) connector (2 pcs)
1 x XH female balance (5S) connector (2 pcs)
1 x Birch plywood plate 600x300x1.2 mm
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Crystal TX 35.180 Ch 78
1 x Crystal TX 35.100 Ch 70
1 x Plastic intake RAM tube for ZG 20 and 26
1 x Metalic joint for DA-85/DA170 cilinder/elbow
1 x Piston for ZG 20
1 x Metal gasket elbow/cilinder DA60R/DA120
1 x PCI-HV ignition conversion set with Zenoah rubber plug cap for Z
1 x Piston for ZG22 / ZG23 / G2D70
1 x Adaptador equilibrador HITEC (XH)
8,425.31EUR
Manufacturers
Manufacturer Info
KontroniK
KontroniK Homepage
Other products
Languages
Español English
Currencies