| 1 x | DPSI magnetic switch actuator (housing) |
| 2 x | Cable coupler M2 (10 uds) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Black large kwik link (10 pcs) |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | DPSI Ampere battery backer |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Connector CAN 15 |
| 1 x | Fixed launching hook |
| 1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
| 2 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
| 1 x | Tow hook for tug |
| 1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | LOWER TOW HOOK |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 2 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | Interface Jack Adapter IKARUS |
| 1 x | CM-3 |
| 1 x | ABS I Strip 10x5x1000 mm |
| 2 x | Strip 3,5x1,75x330 mm |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Glases Moritz |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | Interface Realflight Simulator |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 2 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | Horn DUBRO 1/2A |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Foam plastic plates (310x210x2 mm) |
| 1 x | Horn 5/10 with M2 Bearing |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Support pump Xicoy X45 |
| 1 x | Oratex Natural White 2m |
| 2 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Oracover Orange 2 m |
| 2 x | Support XT60 conector (2 pcs) |
| 1 x | Horn 5/20 with M2 Bearing |
| 2 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 1 x | Long pinned hinge (6 uds) |
| 2 x | Aro pasacable Ø20 mm (4 pcs) |
| 2 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
| 2 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Tail boom brace LOGO 480 |
| 2 x | Carbon plate 350x150x3.0 mm |
| 2 x | Logo 400 SE VBar |
| 2 x | Squared carbon wing joinner 5x5x220 mm |
| 2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 2 x | Xplorer3 anemometro |
| 2 x | Z Bender - S Type Tool |
| 1 x | Digital precision scale up to 2000 g |
| 2 x | Hovercraft sailcloth |
| 2 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 2 x | Baseplate servo |
| 2 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | T-shape holder metal LAMA |
| 1 x | Flybar support metal LAMA |
| 1 x | Legs + electric brakes for Viper Jet 90 |
| 1 x | Indoor landing gear set |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
| 1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | BULL MØ1 2.600mm YELLOW |
| 1 x | 120 mm leg for retract undercarriage with rotation sistem (1 pcs |
| 1 x | Bearing block for noseleg landing gear |
| 1 x | Legs + electric brakes for Viper Jet 1700 mm |
| 1 x | Nose leg 155 mm with wheels 70 mm |
| 1 x | Pulley brass 14/2 (2 pcs) |
| 1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Pulley brass 10/2 (2 pcs) |
| 1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
| 1 x | Porta Kwik link M4 4 mm (2 pcs) |
| 1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
| 1 x | Styrene plate 320x120x0.5 mm |
| 2 x | Cable coupler M2,5 (2 pcs) |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Pulley brass 12/2 (2 pcs) |
| 1 x | Pulley brass 8/2 (2 pcs) |
| 1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
| 1 x | Teflon rollers 80 mm x 15 mm Diam. |
| 1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
| 1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
| 2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | Male connector JST SH 1.0mm with 10 cm wire |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
| 1 x | Porta Kwik link M3 3 mm (2 pcs) |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Bags de Luxe ULTIMATUM 2.0 |
| 1 x | Tester LiPo/LiIon/LiMn/LiFe |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 2 x | Slave-cable USB Easy Sim |
| 1 x | Pilatus PC-21 50E BLUE/WHITE (SebArt) |
| 1 x | Wire easy tensioner (red) |
| 1 x | Turbo Timber Evolution 1.5m PNP |
| 1 x | DRACO 2.0m Wheel set |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | Pilatus PC-21 50E RED/WHITE (SebArt) |
| 1 x | Glases Aspen |
| 1 x | Towing hook |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
| 1 x | 12.7 mm 2:1 black termoretract tube |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Transmitter Crystal 35 Mc/s Ch 62 |
| 1 x | 4,8x1000 mm 2:1 blue termoretract tube |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm) |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | |
| 1 x | Propeller G-Sonic 20x8 |
| 1 x | Glass fibre braided sleeve (45mm) roll 10m |
| 1 x | Round Rod 3,0x1000 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | 42 mm black plastic spinner for fixed propeller |
| 1 x | EasyFLY Addon |
| 1 x | Spinner plastic white fixed propeller 30 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Tank ULTIMATUM 2.0 (3.2 L) PRO |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 2 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | Round Rod 6,0x1000 mm |
| 1 x | 50 mm black plastic spinner for fixed propeller |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | Set transmisions ULTIMATUM 2.0 (dura/aluminium) |
| 1 x | Glases Ace |
| 1 x | BULLIT Wing 840 mm |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | Glases Innovation Plus |
| 1 x | Brake controller for 28 and 36 mm Brakes |
| 1 x | Pilatus PC-21 + LG.2100 mm BLUE/WHITE (SebArt) |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | Towing hook |
| 1 x | ABS I Strip 20x10x1000 mm |
| 1 x | DC-3 Douglas (DAKOTA) 1800 mm Electric LG |
| 1 x | Glases Flitemaster |
| 1 x | Skyray (RBC Kits) |
| 1 x | Glases Nimbus "Black" |
| 1 x | Turnbuckle M2,5x32/48 (2pcs) |
| 1 x | Turnbuckle M2,5x27/43 (2pcs) |
| 1 x | SF260 SIAI MARCHETTI 50E yellow/black (SebArt) |
| 1 x | FunCub NG azul RR |
| 1 x | Monokote ROJO misil (1.8x0.65m) |
| 1 x | 1,6x1000 mm 2:1 black termoretract tube |
| 2 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | UHU hart 35 g |
| 1 x | MB-339 Aermachi 84" ARF c/retractil electric |
| 1 x | Switching module high voltage SXH |
| 1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
| 1 x | 37 mm PVC transparent battery termo-retract (1 m) |
| 1 x | Oracover Black 10 m |
| 1 x | Oracover CHROME 2m |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
| 1 x | Oracover Black 2 m |
| 2 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
| 1 x | Transmitter Crystal 35 Mc/s Ch 77 |
| 1 x | 3,2x1000 mm 2:1 red termoretract tube |
| 1 x | 1,6x1000 mm 2:1 red termoretract tube |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
| 2 x | Servo NARO Max Std |
| 1 x | P 17×5.8 Prop-2PCS/PAIR |
| 1 x | F3A carbon 95 mm spinner |
| 1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
| 1 x | 102 mm INO spinner (carbon imitation) |
| 2 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
| 1 x | Spinner 104x131 mm 115 g CFK-BS |
| 1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 3,2 mm |
| 1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
| 1 x | Xoar Electric Beechwood Prop 16x7 |
| 1 x | Charger SKY RC D200 neo |
| 1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
| 1 x | Carbon plate 350x150x2.0 mm |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | Carbon plate 350x150x4.0 mm |
| 2 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
| 1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Tachometer Hyperion Multi-pala |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | Soporte grifo FESTO (2 pcs) |
| 1 x | Quick hose connector 6-4 mm |
| 1 x | MZ-10, 5 Channel HoTT |
| 1 x | Fabric scissors curved Premium, 16 cm / 6" length |
| 1 x | Spinner fixed propeller 60 mm / 5,0 mm |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Angle support XT60 conector |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 2 x | Aceite DELUXE turbine Jet Oil 1 litro |
| 1 x | Air pressure gauge |
| 1 x | Propeller 3x3 |
| 1 x | Blade holder metal LAMA |
| 1 x | Swashplate metal LAMA |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
| 1 x | Spinner INO 89 mm Chrome (Imitacion metal) |
| 1 x | 70 mm INO spinner (carbon imitation) |
| 1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
| 1 x | Aluminum Fold Prop Spinner 30 mm / 3.17 mm |
| 1 x | 51 mm INO spinner (carbon imitation) |
| 1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
| 1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
| 1 x | Spinner Alumin. propeller pleg. 30 mm / 4,0 mm |
| 1 x | 82 mm INO spinner (carbon imitation) |
| 1 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
| 1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
| 1 x | Combo RAY C3542-1000 + ESC 60A |
| 1 x | Xoar Electric Beechwood Prop 21x10 |
| 1 x | Cockpit plastic closing |
| 1 x | Xoar Electric Beechwood Prop 15x8 |
| 1 x | Cockpit aluminium closing 4.7g |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
| 1 x | Carburator Moki S 180 |
| 1 x | Dust collector for mould cleaning |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Xoar Electric Beechwood Prop 24x8 |
| 1 x | Xplorer4 anemometro |
| 1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
| 1 x | Carburator Moki S250 |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Carbon plate 500x400x2.0 mm ISOTECH |
| 1 x | Carburator Moki S400 |
| 1 x | Carbon plate 350x150x2.5 mm |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Carbon plate 350x150x0.5 mm |
| 1 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
| 1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | Hot Glue Stick RED |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | Carbon plate 550x350x4.0 mm ECOTECH |
| 1 x | Carbon plate 350x150x1.5 mm |
| 1 x | Combo FOXY C3530-570 + FOXY 80 amp |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Conector XT-150 6mm (Set: 5 pares) |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | 9x4.7 * 22x12 carbon propeller |
| 1 x | Oils Pumps Empty (1 liter) |
| 1 x | Charger ISDT 608AC 200W |
| 1 x | Xoar Electric Beechwood Prop 20x10 |
| 1 x | Carbon plate 550x350x3.0 mm ECOTECH |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | VBar Control Touch, midnight black |
 |
| 22,979.62EUR |
