1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Vasa model Catapult |
1 x | Xplorer1 anemometro |
2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
2 x | SE Ring 300 mm (2 pcs) |
2 x | Spikes Band (5 m) |
3 x | 20x1000 mm Ring Strap Back To Back |
1 x | 20x200 mm battery rings |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Buy Perforated film 145 cm / 50 m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
2 x | Big-Malibu XL Roof box with surfboard rack GREY |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Buy Perforated film 100 cm / 10 m |
2 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
2 x | ABS 500 x 400 x 1 mm (white) |
2 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
3 x | ABS 500 x 400 x 1,5 mm (white) |
2 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | USB HLS prog. interface |
2 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | CC 05 |
1 x | 3 LiPo XH>EH adapter |
1 x | Adapter lead MPX/EC3 |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Adapter lead MPX/XT60 |
2 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Dean "T" - Futaba Adapter |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | 30 cm BEC cable (female) |
1 x | CC 01 |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
2 x | 5 LiPo XH>EH adapter |
1 x | 30 cm BEC cable (male) |
2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | CM-3 |
1 x | JETImodel SINGLE BEC |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | 1/4 Pilot "Mike" |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Conector BEC female (10 pcs) |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | 15 mm floating pad (30 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Support pump Xicoy X45 |
1 x | Propeller POWER-PROP 13x9 |
1 x | Propeller electric carbon 7x7 |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | PROPELLER ELECTRIC glass 9,5x6 |
1 x | Propeller POWER-PROP 12x9 |
1 x | Support FUEL DOT V3 |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Porpeller HUNTER 480 |
1 x | Propeller electric carbon 10x7 |
1 x | Propeller POWER-PROP 13x8 |
2 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
1 x | Propeller electric carbon 8.5x6 |
1 x | PropCover 16-20" (2 pcs) |
1 x | Propeller APC 13x4 Electric |
1 x | Ring 320 mm length (5 pcs) |
2 x | SE Ring 360 mm (2 pcs) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Tape GFK 50 mm |
2 x | Cinta Goldfix 1m |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Tape GFK 25 mm |
2 x | Fiberglass plate 620x540x1,0 mm |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
1 x | Conector Servo female 4 pines |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | LA500 pre-rotation gear hub |
1 x | Motor rotor LA-500 |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Fiberglass plate 620x540x3,2 mm |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | SPS 70V 140/280 A |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Long Switch On/Off micro |
2 x | Male connector for 10 pines AWG |
2 x | EWC3 40 cm wing connector |
1 x | MR30 connector male |
1 x | Red 3m5 mm connector holder |
1 x | PPM Encoder Module |
1 x | Support XT60 conector (2 pcs) |
1 x | Support conector MPX (6 pcs) |
1 x | Propeller MENZ-S 20x10 3 blades |
1 x | Propeller MENZ-S 21x12 |
1 x | Propeller MENZ-S 15x6 |
1 x | Propeller POWER-PROP 9x5 |
1 x | Reductora IPS dual-motor 10,7:1 with spinner |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Chopped glass fibre strands 0.2 mm |
1 x | Carbon plate 350x150x1.0 mm |
1 x | 22x12D BIELA 3Bl propeller (3-blades) |
1 x | 22x8 BIELA propeller |
1 x | 22x10 BIELA propeller |
1 x | 23x10 BIELA propeller (4-blades) Scale |
1 x | 16x8 BIELA propeller (3-blades) |
1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | 18x10 BIELA 3Bl propeller (3-blades) |
1 x | Support Filtro FESTO |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | 16x10 BIELA propeller (3-blades) |
1 x | Propeller MENZ-S 16x10 |
1 x | Propeller MENZ-S 21x8 |
1 x | Propeller POWER-PROP 16x8 |
1 x | Propeller MENZ-S 16x12 |
1 x | Propeller MENZ-S 18x8 |
1 x | Carbon plate 350x150x4.0 mm |
1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Chopped glass fibre strands 3 mm |
1 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
1 x | Carbon plate 350x150x0.5 mm |
1 x | Propeller 9x7 SlowFlyer |
1 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Retract undercarriage |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | Cooler motor type 280 |
1 x | JIVE 80+HV Esc |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | LA500 front gear holder |
1 x | Baal link 4/14/4 (5 pcs) |
1 x | ASW 15 5000 mm (Airwold) |
1 x | Air filter MOKI |
1 x | Moki Exhaust Bend 200 mm |
1 x | ASK 21 6.8m |
1 x | Moki Exhaust Bend 50VT |
1 x | Baffles for Radial Moki S250/330 mm |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | EWC6 40 cm wing connector |
1 x | DPSI Ampere battery backer |
1 x | VPP system propeller for AXI VPP motors (spare) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | Esc KOSMIK 160+ HV COOL |
1 x | KIRA 600-16 |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | SE Ring 350 mm (2 pcs) |
1 x | BEC extension JIVE |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Adapter FUN 400/480 |
1 x | KIRA 400-39 5,2:1 |
1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | 17x8 BIELA propeller |
1 x | Motor Moki S 250 cc 5 cyl with autostarter |
1 x | Swift 5050 mm (Airwold) |
1 x | Motor Moki S 300 cc 5 cylinders |
1 x | Fox 4000 mm with flaps (Airwold) |
1 x | ASW 20 5000 mm with winglets (Airwold) |
1 x | Motor Moki 100 BVT |
1 x | Carburator gasket MOKI |
1 x | Propeller POWER-PROP 7x7 |
1 x | DG-303 ACRO 3750 mm, winglets |
1 x | Fox 4000 mm (Airwold) |
1 x | Baffles for Radial Moki S180/320 mm |
1 x | Regler autostarter MOKIS250 |
1 x | Fox 4000 mm Airworld,cabina |
1 x | Motor Moki 180 |
1 x | DG-303 ACRO 3750 mm (Airworld) |
1 x | KIRA 480-31 5,2:1 |
1 x | DG-303 ACRO 3750 mm, canopy |
1 x | MOKI S250 Intake Bend |
1 x | Motor Moki S 250 cc 5 cylinders |
1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | Release film 100 cm x 50 m |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | 4 mm Prop Adapter M8 |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | SCHARNHORST accessories |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Micro Switch button |
1 x | Connector Sub-D 2+5 Female |
1 x | Connector Sub-D 2+5 Male |
1 x | MPX-Dean "T" Adapter |
1 x | Multi-adapter balancer JST - TP |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | EWC3 100 cm wing connector |
1 x | Female connector for 16 pines AWG |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | JETImodel Addcap 1640 |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Extension 5 lipos JST/C - JST |
|
46,245.42EUR |